Air Venturi AVENGER Bullpup (Full Review) Regulated PCP Air Rifle in (Shot Show 2022 Air Guns)
Vložit
- čas přidán 26. 08. 2024
- The long awaited Air Venturi AVENGER Bullup regulated PCP rifle is finaly here! Order your now for just $399 here: www.kqzyfj.com...
Shot Show 2022 New Airguns Videos:
DonnyFL Limited Edition Muzzle Break: • Donny FL Muzzle Break ...
Reximex 2022 Video Catalogue: • (REXIMEX Airguns) Regu...
Evanix in 2022 at New England Airgun: • New Airguns 2022 Shot ...
DTM Direct to Mag FX Loader: • DTM Direct to Mag FX I...
Kalibrgun Semi Auto Cricket 2 Tactial: • New Airguns 2022 Shot ...
Air Ventuir DragonflyMk2: • New Airguns 2022 Shot ...
Air ArmsS150 XS Tactical: • New Airguns 2022 Shot ...
Air Venturi Bullpup FULL REVIEW: • Air Venturi AVENGER Bu...
Benjamin Gunnar: • Benjamin GUNNAR (Regul...
Benjamin Gunnar FULL REVIEW: • Benjamin Gunnar Review...
Umarex Air Javelin Pro: • NEW Umarex Air Javelin...
Umarex Primal 20 (20 guage PCP): • New Airguns Shot Show ...
Umarex Air Saber Elite X2: • New Airguns 2022 Shot ...
Umarex Gauntlet 2 in .30 caliber: • New Airguns Shot Show ...
Umarex Origin in .25 caliber: • New Airguns 2022 Shot ...
GAMO Swarm 10X Gen3i: • New Airguns 2022 Shot ...
Cleaning thing: J.L. Crown Saver www.mac1airguns...
Hey guys! I will get 2-5% of the sale on ANYTHING you buy after clicking though one of the Affiliate Links below. Amazon, eBay, Pyramyd Air, and Airgun Depot. Thanks for watching! -Nate
* Pyramyd Air AFFILIATE LINK: www.kqzyfj.com...
* Airgun Depot AFFILIATE LINK:
* Amazon AFFILIATE LINK: www.amazon.com...
* Ebay AFFILIATE LINK: rover.ebay.com/...
You can always find our CZcams Channel by going to www.Air-Gun-Channel.com Thanks for watching!
It's getting real hard for me to spend more. 👍👍👍
I wouldn't shoot wit the airtube resting on something, or being held in place. It ultimately connects directly to the barrel shroud. This will 💯%effect accuracy and POI.
Yeah...I had no choice! It was a bummer. Need a better bipod.
I agree for the money it is hard to beat. A lot of fun for the money out to 75 yards if you get a really good barrel even farther.
I remember when you did the Avenger long you shot the same hole every time practically. You and I both know with mostly all airguns we play the barrel lottery. I have been lucky. Some won’t be so lucky. Great review bud. Thank you.
I think the barrel lottery could be it. I just watched the Wood Avenger review....that wood Avenger was the best gun I ever shot...for accuracy.
I lost the lottery. My .22 wood Avenger shoots pellets excellently but slugs fly all over, no matter what size/weight. I know something is going on at the end of my barrel I just wish pyramyd air/air venturi would do something about it instead of responding "some guns like slugs and some don't".
@@rickrazz7136 sorry your having issues brother. Did you try a barrel band or internal baffle system with an adapter and moderator. All my stuff is 3D printed from Jeff in California off of eBay except the adapter which came from Slovenia. I really hope it’s not your barrel. With Chinese barrels it’s either omg or holy “F”!
I didn't win the barrel lottery either. I had to fire lap my barrel to get it accurate. I also added the Hajimoto strip stack. It works real nice. As quiet as the BT65SB QE I had before this. I also have the Donny extender but had to remove the centralizer tube because of the strip stack.
@Heath Halfhill thanks, yes I have donny extender and a wolf airguns moderator. This tighten up the jsb slug grouping but still way unacceptable. Thinking about having a gunsmith look at the barrel.
I bought one yesterday on a Pyramid B/F sale for $319.00 .... :) Your review sold it.
That's great the way you put the chronograph split screen with the target.
Yeah, pain in the butt running 3 cameras, then trying to match them up later...but worth it if you can pull it off. Too may video files gets crazy
The BEST! Airguns review channel there is period!👍👍👍👍👍
Thanks to my best subscriber! Happy shooting! -Nate
Man that dude is accurate. I was thinking about the origin but now I’m leaning back towards the avenger.
And I wanted to say Nate when I put a Donny fl 1/2 by 20 extender on my reg adventure it stoped most of my flyers that extender came down over the barrel and just about stoped the flyers and I put a tanto mod on it . Made it quite love it . Thanks Nate
Wow really? I need to try that! Thanks for the tip! -Nate
@@AirgunChannel I have a 3D printed internal baffle system on my .22 Liberty and .25 cal avenger with the adapter and LDC and they are both mouse fart quiet like 68 db on the .22 @ 900 with 18.13s and 74 db on the .25 with 34s @ 860 FPS. The internal baffling makes a huge difference when added with a external moderator. I wish I could have this setup also on my LCS .25 cal. But to be fair the mechanical air driven action makes more noise than the report it’s self.
@@heathhalfhill6401 Which 3D printed moderator you are using with AVA your rifle? Thanks
@@heathhalfhill6401Hi, Heath! I've got the 25 cal Avengers. Where do I find the internal moderator slide in sleeve that still works with the Donnyfl adapter? I found only one I think on eBay so your recommendation would be helpful and appreciated! Thanks man and happy holidays. 😊
More than decent for the money.
Thanks for the video.
Yeah, not bad for $400
I have a hatsan 25 cal hercules bully, and it's heavy as hell! I'd like to have a lighter one. That one looks pretty cool!
Yeah, light can be good!
I have a xeneca eagle claw .25 which is fairly heavy, and an avenger .22 which is very light. I love the lightness of it and not having to,worry about it getting gouged in the woods like wood stocks do. 75 yards and it shoots an inch to an inch and a half or under, but only because I am not,a,great shot. Someone else,could do much better.
Ive been considering my first PCP. Preferably in .22 but.possibly .30.... Regardless i love your content and the way you present your material. Its as if whose watching is there with you. Am going to watch to see what else you have to say about this air rifle even though im pretty much commited to purchasing. When i do, ill look for a link so you can get a little $ from it. Once again, great job young man! Keep it up! Ive decided to subecribe.
Well from the best channel on CZcams. I’ve got one ordered in .25 can’t wait to get it I hope it ships on the 20th . I love bull pups and for the money this is a great gun thanks Nate you the man . Is this one for sale?
Sure is! $379 www.airgunnation.com/topic/wts-the-new-air-venturi-avenger-bullpup-in-22/?referrer=1
Hurry and get the second review out. Anxious to see more and farther distances! Your videos rock, Honesty nothing less. Got mine in 25cal ordered! Also how do you like the Nomad 2, air compressor ?? Waiting on that to arrive also! Praying it's good I only got one shot at getting this right! $$$$.
Compressor seems good so far...Only had it one day. The 50 yard shooting was dissapointing. Not as good as the wood version.
@@AirgunChannel thank you for getting back. Your videos are awesome.
I have a Avenger 177cal. It's accurate and reliable. I have it tuned around 830fps. I can get 140 shots on a full fill.
I have used my Nomad 2, 64 times. So far it works great. AEAC VLOG has a complete video and maintenence schedule. I do the basic maintenence every 20 shots. Otherwise it won't purge with just unscrewing the bottom knob. This is not in the manual but normal per Pyramid Air tech dept.
Iam keeping a journal of everytime I use it. Including adding silicone oil and basic maintenance.
@@heithwatkins 20 shots or refill? And is that refills on a 13cc bottle. Please help. Thank you!
Real nice accuracy not a bad (air venturi avenger bull pup )
Great review and presentation NATE nice shooting 🎯
Thanks! I was dissapointed...but still not bad for a $400 gun.
@@AirgunChannel Hey check out the new Benjamin Gunnar regulated with a bottle , short review by shooter #1721
Master reviewer, ... By far the most entertaining air gun review channel on you tube by BIG MARGlN.
Absolutely!👍👍👍
Thanks man! Now if only the manufacturers would notice! Tired of paying for these guns! Thanks for watching! -Nate
Loved the episode shooting cans in the fire 🔥
Nate awesome review, Nate
Thanks yo! -Nate
@@AirgunChannel Did you sell your pistols?
Nice shooting.
Nice video
Thanks...and thanks for watching! -Nate
@@AirgunChannel I'm a fan.
hola amigo, a cuánto está regulada la válvula para los jsb 18.13?
saludos
Try a Beeman or Carm mag. It should help get rid of the flier Brother!
I never had a problem with my mags. I think it's how he's bracing with the air cylinder.
@@heithwatkins when they bolt probe is retracted from the mag it damages the skirt of the next pellet. These Marauder type mags do this! Best thing as to make the hole in the clear part round and chamfered in.
Look at the clear parts between them Beeman and regular Marauder mag.
Thanks for the tip. I was single shot loading though.
They are tack drivers. The weakest link are the mags. They don’t hold up well and are hard to get more.
Good to know. Thank you! -Nate
There are guides on yt to fix the mags. I have had to,fix 2 now. Not too,hard to dothe spring stretches or,weakens a bit, you just have to rebend the spring a bit and it works fine after that.
@@Nazareth434 Thanks-I’d tried the fix, worked ok for a while. Then, crapped out again. Shouldn’t need to modify a mag that’s in production .Just pointing out the weak spot so people aren’t surprised if it happens and so hopefully the manufacturer improves on subsequent builds.
I’ve been looking at the avenger line up for my first PCP! I don’t care about the plasticky stock makes it easy to carry around the backyard or the woods also gives room to add a scope. What air compressor would you recommend?
I would recommend the $300 12V portable compressors off Amazon....the Nomad is good too.
Check out the Hatsan Spark too. I have had one for 13 months now, 325 bucks at amazon, weighs only 12 pounds, air cooled, no oil or mess. I have aired up 4 pcps regularly for over a year now. Only issue was you have to replace the 2 small batteries in the temperature gauge on top about every 6 months. Batteries are cheap and it takes about 5 minutes. Other than that it has been perfect. Give it a look.
@@somwrtlftur2367 How long do these 400 to 500$ air compressors last? I like the more portable versions also how long do they take to charge a 4500 PSI gun?
@@pricelessppp Hi, well I have only owned it for a little over a year. It's hard to say how long it will last. But like I said it has been problem free since I bought it. And I use it regularly. The previous 20 years I hand pumped until I could no longer do it. So that's why I bought this Hatsan. It is rated to pump a 4500 psi gun but I don't own one. But I can pump a Gamo Urban, a Hatsan Flash and Flashpup, a Stormider and a Prod. All but the Urban are 3000 psi guns. I do air the Urban up to 3350 and it's no issue at all. It takes just a couple of minutes with each gun. But all of these guns have very small air tubes so take that into consideration. I'll tell you I wish I still had my old Talon SS with it's giant bottle to see how the compressor would have done with it. I don't know if it would have been able to but maybe so. If you have anymore questions just let me know.
I've the original long rifle, and now the Bullpup Venturi. I just tank my tanks to the local dive shop and get them filled up $7 each. Simple. And no, I don't live near the ocean.
As Usual, Great Video. What kinda power were ya getting or is that in part 2? also, thanks for bringing me back to the 80's with electric avenue.
It's 32 foot pounds. Next video may be a different caliber.
🤣 I hope it's not weird that I relate to "talking dirty" to my own pcp air rifle and other personal belongings.
You should trai the reximex throne gen 1 its a pcp that out shoots fx stryt from the boks
Not in the USA...
Amazing gun and review
Thanks for watching! -Nate
My avengers 25 n 22 like the h&n ammo, hades and polymags....they will not shoot the jsb 18g, 25g 33g ...the bullpup is nice...
My .22 Avenger pretty much likes all pellets. The best are Eco tune 14.4 crosman copper, Pro tune jsb 18.13, Power tune H&N Baracuda match. Mine will not shoot slugs!
Wow,I should try some other pellets.
It looks like a great shooting airgun how much is it
Link in description. $399 USD
I can’t buy pcp air rifles through them because I live in Alaska
I'll send you this one. kaylaindy@gmail.com. -Nate
Was thinking about this, but then decided for another Kral with cocking lever forward! Glad I did.
Yeah, lever in back is a huge pain in the butt. ...for sure.
@@AirgunChannel just save your money and buy a Kral, can't go wrong! I bought 6 recently and they're so much nicer. The NP03 is good puncher monarch and the puncherX are outstanding. The Dazzle is off the charts too. Any of these are better air rifles. Then much recently I purchased an FX Maverick sniper model. We all know the quality of that. The Krals are very close to that quality with the same lights out accuracy! No joke.Money well spent. If you can save enough to get an FX model which starts at $1300 the barrels are interchangeable. So if you buy a say .22 cal and want to go bigger,just buy the higher caliber barrel and install it! Pretty Awsome. Ed da snippin backyard man😎✌
@@AirgunChannel To me, it seems like going around your elbow to scratch your ass. It must have been designed before the word "ergonomics" was created.
FX or Kral for accuracy?
@@jeffstanley4593 FX cost little more with high quality but Kral is right there with it in accuracy. These are both longer range air gunz. The Kral puncher dazzle,and Kral puncher empireX are superior choices for little less money and get a ton of shot counts on one fill. 177 gets 450 shots of so and .22 gets around 300 or so. Don't hold me to this as it varies rifle to rifle. If you're not worried about such a high shot count but still 100 or so shots per fill then Kral puncher breaker lever in back or Kral monarch,lever in forward is Awsome for the money from Airgun Depot. Not many of them left so get on top of it if possible RN. And best of all these 3 or for guns I mentioned, they have power wheel ajusters on them for tuning. If you have money for upper end quality go with FX. Top of the ladder.Research first to see what fits your need and preferences.No B.S. here.👆💥💪 Ed da snippin backyard man😎✌
Amaizing
Also Utah Airguns sells the Bull Pup its where I got mine.
Good call! -Nate
I love mine, same thing very accurate.
Looks like it has a lot of potential. Camo dip that stock, would look much better.
great idea!
no link for the cleaning rope :(
Bore Snake
J.L. Crown Saver www.mac1airgunshop.com/jl-crown-saver-p/jlcs.htm
@@AirgunChannel thanks mate! snagged one
Cool Ninja!
Thanks! -Nate
Electric avenue man ! You do some of the best reviews.
Hola, tengo un Umarex origin.22 , pero me gusta más el avenger , si lo recomiendas? Sale bueno? Saludos desde Nayarit México
Lo que no me gusta es el sistema de Palanca trasera
Estoy de acuerdo. El amartillado trasero no es bueno.
Liked. Does this Bullpup version have the upgraded poppet that has been problematic for a number of the Avengers? Thanks.
Good question, not sure.
Thanks for the video. I wish this had a wood stock available.
You think that shift in impact on the smiley face might have been parallax? Only thing I could think of shooting another small group like that off your original POI
There is no parralax on my $500 scope. It was set to 35 yards. The barrels may be messed up on the bullpups. For accuracy you want a wood version. The night shift did the bullpup, day shift master did the wood barrels....I'm not joking.
What pellets worked best for you? I'm asking alot who have tested this gun. On the list for one in March and id like to go ahead and grab some lead...and comressor b4 it gets here. Would suck to have a gun and no air
You should make group from 100 yarda. We want to see the actual accuracy of this gun.
Seeing the point of impact change, makes me think one of few things right away. Is the harmonic tuner in the wrong place, is the scope tight,does the barrel need a bore paste job, etc.
Excellent observation. I also wonder if bracing by the air cylinder is throwing off some shots. It's connected to the shroud/barrel.
@@heithwatkins very possible
Yeah, I couldn't get the barrel very clean. That could be it. It couldbe the air cylider bracing...but I tried it alot at 50 yards, making sure not to touch the air cylinder (off a bag) and it was doing the same thing.
Try weight sorting and sorting by headsize. My Avenger 22 seems to like 5.52 headsize best.
If you take the rifle out of the stock, are there cavities that can be filled with expanding foam? It'd help with that hollow toy sound.
Quick question, would this be a good rifle for hunting?
nice review sir... hows the "crack"? is it acceptable for backyard plinking?
How durable is that tall spindly rail? We need some durability testing reviews to make sure it doesn't suffer from some of the other affordable bullpup rail system issues.
Good review that's the one I'm looking to get my very first true PCP the reason I say true is I have a Valken M17 less lethal paint ball gun and the Sig MCX, but I don't consider them true PCP the sig is a cross bread to me because it'll use co2 as well as hpa and the paint ball gun well it's paintball
Video seems like it is semiautomática?
no
Did you unscrew the plug from the muzzle of the shroud? I think you'll find that there are baffles on the inside face of that plug. That's where they are / were on my avanger wood.
Yeah. I should have checked but I'm pretty sure I looked down and could see the tube was completely empty to the bottom. The wood avgenger is only 68 decibles while the bullpup is 85 decibles.
@@AirgunChannel that much louder? I wonder why they decided not to fit the baffles? Can't be that much of a cost saving to for a part they already make? 🤷♂️
How's is the Nomad compressor holding up? Do u recommend?
No, it broke after 2 months
Nice, only problem is the price will double in the UK
Not worth it!
Did you adjust the moderator or just leave it at 2800.
Nice brother...where do you buy??will they do shipping in India for the 177cal.
pyramydair.in/ or www.krale.shop/us/sport-shooting/guns/air-rifles/
Approximately how many shots can 1 barrel of wind fire?
about 40 shots
How was the cocking-loading? I have a hatsun bull pup and it always had issues chambering a round from the mag.
Never tried the magazine. I'm sure there are no issues. The Avenger is very refined.
Very impressive 👍👍
I received my Bullpup today - trying to get the shroud off because I can't get a drinking straw in the baffle to help with cleaning the barrel.
I removed the two screws from the upper Picatinny rail, but I can't unscrew the shroud as easily as you do it in the vid - is there something else that I need to loosen so that I could then unscrew the shroud for barrel cleaning??????????
Your not supposed to loosen any screws. That may be your problem. Definatiley put those screws back first...then just grip hard and turn shround counter clockwise. It is kind of tight so you need to break it free. Don't tighten it hard when you put it back on...just lightly snug it up.
@@AirgunChannel
Thank you.
Ok
I agree.
Where u buy the cleaning pull through rope
Wish I could hav a gun lik tat in 22cal,its my dream to hav 1 pcp, getting old but can't afford it....great video n also a subscriber of ur CZcams channel... All d way from Nagaland....
Hello from the USA! That is the cheapest PCP there is at just $399 USD. pyramydair.in/
Yes,but out here it's expensive,according to d indian currency...
I'm a farmer,can't afford it in Indian
Cn u help me get 1 in India..
This is gun I’m looking at now. Love able to adjust without having to take apart. Question; I saw a review With original avenger rifle, not bullpup platform, and reviewer claimed that manual says if want to adjust power “ down”, have to de-gas gun. Adjusting up is ok with pressure. 🤷♂️ Is that still true with bullpup?? Thanks maaan.
Still need to check out Morgus The Magnificent on New Orleans Airwaves channel. 🤣
Air venturi avenger bullpup cilyander life please answer
Dude, great many helpful videos. Can you help me? I purchased a Hatsan Flashpup in .177cal. It lacks accuracy at 30yards, so I am returning it. I'm looking at this Air Venturi as a replacement. Is it better to go with .22cal with these guns? I really like .177 but not at the expense of accuracy? Thoughts?
I think .22 is better. These bullpups have bad barrels. The Avenger Wood will be more accurate. Your AV BP may shoot good, It's the Crosman lottery as far as barrels. SOme may be good. I was not impressed with this BP's accuracy.
This will sell like hotcakes ...
Good for AV!
Is the o rings at the bolt exist??
How many shots per fill?
25,000 shots per fill. ....I would say about 70 shots
Nice air gun
Nice video. What kind of knife is that?
Raven Crest Tactical. But they are always out of stock. You can now get my Raven Crest OTF switchblade and others for 15% at RAVEN CREST TACTICAL. Use coupon code AGC15 (you get %15 off, my affliate commision is 25% of the sale! How cool is that?) Thanks RAVEN CREST!!! * Knives Under $99: ravencresttactical.com/product-category/99-under/ref/423/?campaign=bravo * All OTF Switchblades: ravencresttactical.com/otf-knife-models/ref/423/?campaign=bravo
@@AirgunChannel awesome thanks for the code. Def be checking that out
What scope is that?
I can't answer comments because I get 1000+ a day. You just got lucky. It's the Element HELIX scope
damn, thanks. Subscribed!@@AirgunChannel
How can I order that unit I'm here in Philippines?
Nice.👍👍👍😃
Thanks for watching!
Will it shoot slugs?
How much the price of airsoft rifle?
I need this gun plz.
Sure, Just email me and I can send it to you for free.
Wooow ,😊 that is may dream
Nice review! Thank you.
How money ?
$399 USD
Slow it down to 830 to 840 fps and it will shoot in the same hole consistently. The barrel twist is too slow for this airgun to shoot at 885 and loses stability.
Dang bro! Great tip! -Nate
Is that speed for the .177 or the .22? I have the regular avenger, not the bullpen. It,seems,to,like around 880 or so, but I haven't tried slower speed, and i do get fliers at 880 now and again. Imwonder,if slower speed might increase accuracy?
@@Nazareth434 for the .22
@@AirgunChannel Keep making the awesome reviews, Nate.
@@FarmerFpv thanks, ill try lowering speed a bit- see if that improves groupings-
2:43 It looks like you are regulated at 2600, not 2800.
Only thing that puts me off this rifle is having the lever allllll the way back under your ear.
That is my problem with it too, maybe it could take some getting used to, if they made it in a wood stock i think i could live with it
Ive got the plastic stock avenger rifle and i gotta say it shoots great with very low es and sd, very accurate with slugs and pellets.
Unless you shoot speed silhouette. It doesn't matter.
Yep, buy something else! Many options to accomodate
I'm looking at the Artemis P35 for the same reason
@@Don.E.63I have a Nova Vista neupump which I think is the same rifle as the Avenger but with a built in pump. I wish I'd gone for the Avenger instead because the neupump is too damn heavy to shoot offhand. I was in the market for a bullpup for a while for Rabbiting as I like the compact size, but the lever under the ear thing really put me off and anything I came across with a more forward positioning of lever was way out of my price range (or should I say a little too much to justify to the Wife). Then I found the Walther Reign. Beforehand my go to for rabbiting was my BSA Scorpion .177, but that now gets offered as an option to lent to friends if they ever want to come out Rabbiting/plinking.
I get head shots out to 55 - 60 yards consistently, its short, it's accurate, it's got a light synthetic stock but doesn't feel cheap light if you know what I mean, it's well engineered, 2 stage trigger is really good and it's ambidextrous. I paid £700 which for what it does was a bargain as far as I'm concerned.
How much
Does it co.e wita scope
My phone fell, sry. An I get this with a cheap foot pump?
gun only
I mean it's an airgun so there no need to be ridiculously heavy.
Yes...how about ridiclously light? That's how I would descibe this one. Like a toy gun
I find that too light is a problem, some weight is good in my opinion. The grouping looked great to me though maybe that'll make up for it. I enjoyed the video!
Can you use a normal compressor to fill a PCP gun?
Money sir?
$399 USD
What scope r u using very bad accuracy bro ....
Why don't you do a open site video
Quick n' dirty, that's the way I like my reviews.
P.S. One year later have you shitcanned that bi-pod?
I still got it. Never use bipods
I think dogs have a thing in their brain that tells them to walk in front of a target
Looks like you got a used gun bro! Looked like lead in the barrel? If it was from Amazon it is a common thing g I have heard and experienced my self unfortunately!
Vive evanix k550
Wats the fpe on this
Electric Avenue
All the Nomads play "Electric Avenue" by Eddie Grant ....right
Still can’t believe you need a gun vice to shoot a rifle out to 35 ydz or any yardage for that matter.
It's called accuracy testing.
I can't stand air rifles that look like a military rifle, I have an old Daystate LR 90 and the build is steel and brass the internals are super as well
Like👍
ugliest design