I got one of the first 450, swedish made. She's......12 or 13 years old. Bucked tonnes of wood. Fun to fell smaller tree! Always puts a smile on my face it pulls it's heart out. Only things iv changed are chains, bars, spark plugs, air filters and fuel filters. Not the best saw I'm sure but it's been good to me.
Hey Donny, love these saw building vids! I've been running a 359 w/24' bar for quite a few years as my primary firewood saw. Had to change the intake boot to one with a steel clamp (due to air leak) and drilled a hole in the carb, otherwise issue free. I have felling dogs on it and run a mesh filter....great saw! In other words, +1 more for the 300 series!
My aunt told me to help my self to her bar.. after we drank her bottle of Johnny walker she was so mad.. all i remember it taste like pine sap.. after 100 years should have gotten some Canadian mist.
Another light and informative video Mr Donny Walker.. Going to be a nice little saw for your baby girl, we love spoiling our daughters eh man.. Enjoy camping and the time you have with your folks.. SLANT'E
Hey Donny! Dustin Dees from Texas with the Echo 590 you built, just wanted to say awesome job and I love the Saw. Ran it for the second time today and going to be using it for a big job on Sunday! We will be getting our next saw from you and Johnny, tell him thanks for all the help! Cheers from Texas.
Thanks for sharing your knowledge with us man. Love the little husqvarna saws run SP33G xcut on my little 435 cuts fast holds edge well and is nice to file i really like the xcut chains. Have a peaceful weekend! ✌️❤️🌲🐝
Finaly I got it about the air horn overheating problem. I got a 455 in the barn that just starts gets warm then nothing. I will brake it down just like this. Thanks From NH
Can you elaborate more on the carburetor issues on that series of saws? I’ve had my own trouble with these but on the Zamas. Appreciate guys like you taking the time to show professional information and tips. Awesome videos
@@donnywalker4691 346 husky (one I’m workin on has a zama) but you talked about accelerator pump issues on saws with the Walbro carburetors I was curious about those issues
Thanks Donny, I wish I lived closer to take advantage of your expertise! I run a 372 & 61 Husky. Love to upgrade & interested with your recommendations.
I had a 2001, 365 husqy was a great saw .worst part was I regrettably lent it to a relative who has no idea and put strait fuel in it .at the time I couldn’t afford the time it was going to take to repair it and bought a new MS460.wish I had of kept it now and put a new cylinder and piston in it.the main lesson from this was don’t lend your saw ,mower or your wife ,for obvious reasons.😆
Why isn't here much on the 455 and 460.. I've had mine for over 15 years and it's stoll all original and it's getting tired and needs some donnie walker love
@@donnywalker4691 I've used it daily for the last 5 years now that saws cut roughly 600 cords in the last 2 and a half years now and it's still going to work tomorrow is there any way of getting a pop up piston and cylinder kit from you that's been ported by you and also the 460 husqvarna as well I would like to do the same.. cause around here the stores don't even Handel an xp saw so we r kind stuck with the "consumer saw" witch other than power is hands down some of the best saws I've been around and I've done this on and off for the last 25 years
IN MY OPINION ANY 3XX SAW IS GOING TO BE A RUNNER OVER ANY OF THE OTHER VERSIONS THAT ARE NEWER OBVIOUSLY BECAUSE THE EPA WAS NOT INVOLVED AND THE PRODUCTION OF THEM AS MUCH AS THE NEWER SAWS AND FOR SOME REASON THEY JUST ARE SO MUCH STRONGER THAN ANY OF THE OTHER PREDECESSORS I HAVE A PORTED 272 IT JUST RUNS THROUGH FUEL VERY NON-FUEL EFFICIENT I DO NOT LIKE IT I DO LIKE THE WAY IT CUTS I ALSO HAVE A 372 XP FRANKEN SAW BOTTOM OF A 365 SPECIAL TOP END OF A 372 AND ALL THE PLASTICS THAT I MADE A IRON HORSE MUFFLER FOR ACTUALLY BOTH OF THEM HAVE IT THE 272 AND THE 372 LIKE I SAID THE 272 IS PORTED BUT THE 372 IS STOCK JUST THE IRON HORSE MUFFLER WAY MORE FUEL EFFICIENT AND I THINK IT OUT CUTS THE PORTA 272 WITHOUT FAIL IS THERE A WAY TO PUT A SAW AND KEEP ITS FUEL EFFICIENCY I THINK THAT'S COUNTERINTUITIVE DUE TO THE FACT THAT MORE AIR EQUALS MORE FUEL BUT IF THERE IS A WAY TO PORT YOUR SAW AND KEEP ITS FUEL EFFICIENCY WHAT WOULD BE THE BEST WAY I REALLY LOVE TO BUILD CUSTOM HEADER PIPES I CALL THEM FOR CHAINSAWS IT OPENS THEM UP LIKE NOBODY'S BUSINESS AND THEY CUT LIKE A BANSHEE KEEP UP THE GOOD VIDEOS I LOVE THE WAY THAT YOU ARE DETAILED AND EXPLAINING THINGS .
ok i got a 346 i will drop it off in 2 days ///say g/day to boby tell him to WD 40 the truck all over lol///what are the bores on 346 /351 size pls ////PS my hand s NFG / on a bad can not pick my nose ///you still got mum and dad thats a big thing
Looks like she’s hardly been ran that’s a beauty!
3 series is great.
I absolutely agree, but I definitely prefer the earlier versions aside from the 346xp ne.
Nice Donny have a great weekend.
Love listening to you donny 👍🏴
I got one of the first 450, swedish made. She's......12 or 13 years old. Bucked tonnes of wood. Fun to fell smaller tree! Always puts a smile on my face it pulls it's heart out. Only things iv changed are chains, bars, spark plugs, air filters and fuel filters. Not the best saw I'm sure but it's been good to me.
Hi Donny,. Thanks for video. Nice shop, good set up. Maybe some day you can give us a walk around.
Nice to see you able to spend time with your mom and dad
My old boss bought a 346 when they first came out and he’s still using it. Mainly trimming trees and firewood for himself.
That’s a lot of info given out in a few minutes. Watching your great video once ain’t enuff for me. Thanks Donny
Thanks Donny great video!
Hey Donny, love these saw building vids! I've been running a 359 w/24' bar for quite a few years as my primary firewood saw. Had to change the intake boot to one with a steel clamp (due to air leak) and drilled a hole in the carb, otherwise issue free. I have felling dogs on it and run a mesh filter....great saw! In other words, +1 more for the 300 series!
yes a great model keep er in the wood and sharp
Buckin, Donny, and Tinman = Everything a person should know about a powersaw 👍
Sorry to hear of your friend in the hospital Donny. Hope all goes well for him.
Take care have a good weekend
My aunt told me to help my self to her bar.. after we drank her bottle of Johnny walker she was so mad.. all i remember it taste like pine sap.. after 100 years should have gotten some Canadian mist.
man your videos are great. you and buckin are quite the characters. mucho appreciato
Glad I found this. I have a nice old 350 that could use a few parts and I'm scared to do it
I had a 346xp, ran it for years my grandson asked me if he could have it I gave it to him
Just did full rebuild and porting on my old 51. Always a good cutting small saw light and powerful
Another light and informative video Mr Donny Walker.. Going to be a nice little saw for your baby girl, we love spoiling our daughters eh man.. Enjoy camping and the time you have with your folks.. SLANT'E
Thank you!!
Love seeing the smaller ones on the channel I would love to see an MS 361
I've got a lovely clean original 351 I got for £40 form a coworker juat needed a carb clean and it's ran great ever since best saw I've owned
Very cool video. Lots of learning here!
I stripped the intake manifold on a husky 445 as well. Didn't take much with those coarse screws!
I never liked the twist lock filter on the smaller huskies. I like the clip over way better
Hey Donny!
Dustin Dees from Texas with the Echo 590 you built, just wanted to say awesome job and I love the Saw.
Ran it for the second time today and going to be using it for a big job on Sunday!
We will be getting our next saw from you and Johnny, tell him thanks for all the help!
Cheers from Texas.
Right on bud keep er the wood
Thanks for sharing your knowledge with us man. Love the little husqvarna saws run SP33G xcut on my little 435 cuts fast holds edge well and is nice to file i really like the xcut chains.
Have a peaceful weekend!
✌️❤️🌲🐝
Those chains are Awesome aren't they?
Nice vid Donny. Hard to find them in that condition
I really enjoy your videos eh!
I have an '05 345 and '05 359. Never a problem with the 345. 359 came with a bad carburetor, replaced with a Zama and never an issue since.
Finaly I got it about the air horn overheating problem. I got a 455 in the barn that just starts gets warm then nothing. I will brake it down just like this. Thanks From NH
Donny good to hear from you brothr
Great video Donny!
They are great saws. Good tips there 👍
Have a great weekend.
Good luck with the Hyway Titanikle cylinder the look pretty sweet 😎
Can you elaborate more on the carburetor issues on that series of saws? I’ve had my own trouble with these but on the Zamas. Appreciate guys like you taking the time to show professional information and tips. Awesome videos
Which saws did you want to know about what model
@@donnywalker4691 346 husky (one I’m workin on has a zama) but you talked about accelerator pump issues on saws with the Walbro carburetors I was curious about those issues
Just watched ur video on my porch love ur videos what's difference between the 346 xp 45 cc saws and 346 xp 50 cc saws want get one
Happy Easter sir
Great video, can't wait to see what you think of the new hyway cylinder too.
Thanks Donny, I wish I lived closer to take advantage of your expertise! I run a 372 & 61 Husky. Love to upgrade & interested with your recommendations.
Those are great saws you have, Do you rtequire something bigger or smaller
HI DONNY have U ever decked a big chainsaw before and how 🤔 much more power did it have afterwards OMG 6 14 2O22
What model haves decked a lot of saws
😎
Donny find me a 266 wrap and that would fo-fill my hobby 🤘
How were you able to determine the age of that saw, by looking at the serial number?
😉👌✌
Can you fit a 359 cylinder on a 353 crank case
I had a 2001, 365 husqy was a great saw .worst part was I regrettably lent it to a relative who has no idea and put strait fuel in it .at the time I couldn’t afford the time it was going to take to repair it and bought a new MS460.wish I had of kept it now and put a new cylinder and piston in it.the main lesson from this was don’t lend your saw ,mower or your wife ,for obvious reasons.😆
Donny why is there no love for the old Husqvarna 380CD?
Hye Donny, I have a 1991 Husky 345, Problem is I have a bar oiler is always leaking when not in use. any suggestions?
Why isn't here much on the 455 and 460.. I've had mine for over 15 years and it's stoll all original and it's getting tired and needs some donnie walker love
They are a good consumer saw keep er going
@@donnywalker4691 I've used it daily for the last 5 years now that saws cut roughly 600 cords in the last 2 and a half years now and it's still going to work tomorrow is there any way of getting a pop up piston and cylinder kit from you that's been ported by you and also the 460 husqvarna as well I would like to do the same.. cause around here the stores don't even Handel an xp saw so we r kind stuck with the "consumer saw" witch other than power is hands down some of the best saws I've been around and I've done this on and off for the last 25 years
Just subscribed mr walker. Great knowledge you have sr. I live in Mt Airy North Carolina sr. Just wandering how close you are. Have a great day.
Vancouver Island, John.
I live on vancouver island yes I raced karts at charlotte speedway and visited nascar shops love it over there
Hello Donnie I see on the shelf the motul oil what are you running that in and what's your thoughts on motul in a chainsaw? Thanks
Great oil I use it in my karts
In saws mix it 50 to 1 I mix 25:1 for karts but they rev 16000
346xp and 365/371/2 non xtorq are gold in my area
For sure bud there awesome
Hi Donny, you wouldn't happen to have a top end for a 272 would you? I'm looking to build an old 61 into a big bore
I dont sorry
Hope ur doin well happy Halloween.
Thanks bud im doing good happy scary day
@@donnywalker4691 thank u sir.
IN MY OPINION ANY 3XX SAW IS GOING TO BE A RUNNER OVER ANY OF THE OTHER VERSIONS THAT ARE NEWER OBVIOUSLY BECAUSE THE EPA WAS NOT INVOLVED AND THE PRODUCTION OF THEM AS MUCH AS THE NEWER SAWS AND FOR SOME REASON THEY JUST ARE SO MUCH STRONGER THAN ANY OF THE OTHER PREDECESSORS I HAVE A PORTED 272 IT JUST RUNS THROUGH FUEL VERY NON-FUEL EFFICIENT I DO NOT LIKE IT I DO LIKE THE WAY IT CUTS I ALSO HAVE A 372 XP FRANKEN SAW BOTTOM OF A 365 SPECIAL TOP END OF A 372 AND ALL THE PLASTICS THAT I MADE A IRON HORSE MUFFLER FOR ACTUALLY BOTH OF THEM HAVE IT THE 272 AND THE 372 LIKE I SAID THE 272 IS PORTED BUT THE 372 IS STOCK JUST THE IRON HORSE MUFFLER WAY MORE FUEL EFFICIENT AND I THINK IT OUT CUTS THE PORTA 272 WITHOUT FAIL IS THERE A WAY TO PUT A SAW AND KEEP ITS FUEL EFFICIENCY I THINK THAT'S COUNTERINTUITIVE DUE TO THE FACT THAT MORE AIR EQUALS MORE FUEL BUT IF THERE IS A WAY TO PORT YOUR SAW AND KEEP ITS FUEL EFFICIENCY WHAT WOULD BE THE BEST WAY I REALLY LOVE TO BUILD CUSTOM HEADER PIPES I CALL THEM FOR CHAINSAWS IT OPENS THEM UP LIKE NOBODY'S BUSINESS AND THEY CUT LIKE A BANSHEE KEEP UP THE GOOD VIDEOS I LOVE THE WAY THAT YOU ARE DETAILED AND EXPLAINING THINGS .
Thanks I love all the old series as well 🪵👍
ok i got a 346 i will drop it off in 2 days ///say g/day to boby tell him to WD 40 the truck all over lol///what are the bores on 346 /351 size pls ////PS my hand s NFG / on a bad can not pick my nose ///you still got mum and dad thats a big thing
You coming by for a visit where do you live
@@donnywalker4691 melbourne Australia lol
Wow that’s a long way I quess we are not going to Starbucks for coffee today