Tinman, you may be learning, but you are also a great teacher. Thank you. I'm 63 years old and am enjoying learning as you teach. Stay safe and enjoy life.
That saw rips, looks like a perfect reliable work saw ;) just a little tip to help you out: If you put some sawdust between the two wedges when doubling up, it stops them from drifting apart when you hit them :)
Gotta love the sound of a pine wood campfire / popcorn in a microwave idle. Of that saw. Literally releases endorphins or serotonin or whatever. Takes you to a happy peaceful place
Ah yes good old Manitoba spruce and pine, saw's get a lot of run time liming around here know it well. I burn through as much if not more gas and bar oil just trimming than I do bucking but that's what we have here so you make the best of it. Anyways thanks for sharing your time with everyone, take care.
Tinman your the best, explain everything just like we were standing next to you. 👍👍😎. Awesome channel fun to watch it grow. So glad Harvey sent me over when you were getting started. 😁😎 Pat from nw Wisconsin
Hey Tinman, I love how trees two, three and four did a little bounce then slid up right beside number one! Well done. Doesn’t matter if your dutchman isn’t perfect on the first pass as long as you clean it up to where you want before felling it.
Very brave Tinman, we can all watch these pro fallers and learn their techniques, but we don't have the practice, doesn't matter, as long as we put their safety lessons first and foremost, be humble, you did well !
Nice cutting Tinman ✊🏻🇦🇺that saw sounds and cuts awesome. Your giving me flashbacks of a guy called Billy RaySmith. Luv ya buddy✊🏻🇦🇺great to see you cutting Tinman …
Holy cow that saw is just transfer work with no exhaust or intake timing from iron horse?? Dang she’s a ripper for sure. Makes a fella wonder… thanks tinman for another awesome vid. See you on the next one
Hey tinman love your videos and the question of the day I always pay attention never know what you could learn. Hope all is well. Picked up a 372xp will be going back through you vids carefully
I got a Homelite logger saw from the 1970's.... you wanna talk about waking the dead...I can feel the ground rumbling when I set it down. And I got neighbors too.
Hey tinman. Hope you are well. You mentioned bouncing off the rev limiter. I would have thought this build would have an unlimited coil. What does it have? What’s your thoughts on rev limiters on saws in the 65-75cc range? I’ve been trying to find an unlimited coil for my 391 that I am working on. It’s limited to 13k but I think it would happily run a few more RPM than that after the port job. I would just tune it by ear in the wood and have a burble at WOT when I lift up. Do you usually do unlimited coils in your builds? Thanks tinman.
A tin man question for you buddy I'm just learning how to adjust chainsaw carburetors the question I have for you is I got my saw to run but when I first started in the morning it will not fire up without me holding the trigger and giving it some throttle should I adjust the high or low and which way should I turn it in or bring it out the high or low also could have just be that I need to adjust the idle thank you so much God bless
hello tinman I am probably one of your oldest viewers but love your videos I am 90 years young and I still work on chainsaws I have a Mccullough timberbear and the cylinder on the exaust side is a v grove in the roof of exhaust port about 3.16 wide and goes on up into the inside of the cylinder and tapers to a point about 3/4 inch do you have any comment on that I am pretty sure all timberbear have this and so does 610 exhausts opens sooner and slower
I wish y'all would keep your Canadian geese up on your side of the border I got mauled by one as a teenager swimming in a pond and they shit every where cool saw love it
o machado e a motosserra (the axe and the chainsaw) eli silva & zé goiano composição: moacir dos santos / zé goiano o machado e a motosserra tiveram uma discussão motosserra diz que é orgulho da evolução machado pra mim já era pois vem do tempo de adão você agora só serve pra fazer calo na mão motosserra dá um ronco relou o dente no tronco já se vê o pau no chão a serra chamou o machado pra fazer uma porfia machado aceitou na hora e quando chegou o dia entraram junto no mato pra mostrar a serventia a motosserra roncava machado velho tinia e naquele matagal foi só cavaco de pau pó de serra que subia e esse grande duelo deste jeito é que termina na briga das ferramentas o machado é que domina motosserra parou cedo ali no tronco da quina machado seguiu cortando mata grossa e mata fina motosserra impotente rebentou sua corrente acabou a gasolina que isto sirva de exemplo para toda humanidade e você que é tão jovem tem que saber a verdade respeite bem os mais velhos não brinque com sua idade uma pessoa idosa também tem utilidade é um diamante valioso se não tivesse o idoso não teria mocidade
All you 372 husky guys. Its time to switch to a Echo 7310 hot rod... longer stroke more torque better filtration no auto tune, more ccs and cheaper to maintain....
Harvey is a very humble man and easy to talk to,I ran into him and his son a few years ago in the street in front of the local gun store
Tinman, you may be learning, but you are also a great teacher. Thank you. I'm 63 years old and am enjoying learning as you teach. Stay safe and enjoy life.
That saw rips, looks like a perfect reliable work saw ;) just a little tip to help you out: If you put some sawdust between the two wedges when doubling up, it stops them from drifting apart when you hit them :)
Gotta love the sound of a pine wood campfire / popcorn in a microwave idle. Of that saw. Literally releases endorphins or serotonin or whatever. Takes you to a happy peaceful place
I like his tips on piston quenching. Very cool.Been a fan of you both for years.
Great running work saw! The 372 platform is hard to beat for a reliable easy to work on saw.
Love the sound of good running saw. Thanks
Stay safe
Sure seems like a pretty darn perfect 372! Thank you for sharing!
Hi everyone hope everyone is having a blessed Friday
I love your new baby wedge, LOL! Actually perfect for trees of that size. That saw sounds great.
Sounds great. I wish I had an Ironhorse saw. Cheers
Nice video great build ironhorse
I’ve watched yourself, Harvey, and Hooper. All of you are Top Shelf in my book. Keep up the great content We all enjoy you all!
Look at this prairie faller back cut firstin it ‘ nice work
I'm impressed in his work :) by the way - bless you Buckin
Lovely work saw.
All of the trees you dropped landed straight, cuts looks good. Like you said you apply your good habits.
That 372 runs great! Thanks for the video!
Another masterpiece from the ironhorse that is impressive that he didn't do any exhaust porting very snappy love the videos keep up the cutting
Ah yes good old Manitoba spruce and pine, saw's get a lot of run time liming around here know it well. I burn through as much if not more gas and bar oil just trimming than I do bucking but that's what we have here so you make the best of it. Anyways thanks for sharing your time with everyone, take care.
Great saw from Mr. Harvey
Stay warm an safe an keep up the great video's! What a saw!
Tinman your the best, explain everything just like we were standing next to you. 👍👍😎. Awesome channel fun to watch it grow. So glad Harvey sent me over when you were getting started. 😁😎
Pat from nw Wisconsin
We love what you you do Tinman. I never miss a single video. They make my day.
Purdy good runin saw buddy have a good weekend.
Nice saw, going to have to build an Ironhorse pipe for my saw. TC Mahalo Tinman 🤙🤙🤙
Hey man. I love your videos. I am convinced that you are one of the best sources of information on these old saws available on the internet.
Thanks that means a lot.
You inspired me to mess around porting my own saws, great video tinman 🤟
That Ironhorse Saw Is The Bomb And a Real Runner and Working Saw 😀😊😊😀 Tinman 😮😀
The best saw ever made ever,
Harvey knows his stuff, and I would be enclined to say that getting a saw from him is almost like a "gift from God". Cheers
Hey Tinman,
I love how trees two, three and four did a little bounce then slid up right beside number one! Well done. Doesn’t matter if your dutchman isn’t perfect on the first pass as long as you clean it up to where you want before felling it.
Harvey can build a beauty !!
Hey Tinman, Just the transfers with no porting... WOW Very interesting indeed. Keep the Awesome content coming Tinman.
Crazy hot saw!!!!
Very brave Tinman, we can all watch these pro fallers and learn their techniques, but we don't have the practice, doesn't matter, as long as we put their safety lessons first and foremost, be humble, you did well !
I cut the second from the bottom raker off on my 372. It seemed to always be the culprit when my saw stopped while dogging in. It worked.
Great video Tinman. Harvey sure builds a great saw doesn't he.
Harvey "IRONHOURSE" builds a great engine! The guy is a wizard!
Thanks for all your doing. ⚙️🚲⚙️💥💨💨💨
Thanks for being here.
@@tinmanssaws as well man
HEY tinman ,your doing great ,you are getting them on the deck ,and it looks pretty safe ,and the saw is just awesome ,peace an love stuart.
Nice cutting Tinman ✊🏻🇦🇺that saw sounds and cuts awesome. Your giving me flashbacks of a guy called Billy RaySmith. Luv ya buddy✊🏻🇦🇺great to see you cutting Tinman …
Great video man. Dude I love that pick up you got that's just a good setup you got.
I love that truck, it's the perfect tool for what I do.
Thinking about getting me an old obs 454 dually. I love the gm obs perfect price of equipment.
Nice saw
I love to run my saws , cuttimg tree's and bucking up for fire wood
Nice saw.....Hairy trees
Holy cow that saw is just transfer work with no exhaust or intake timing from iron horse?? Dang she’s a ripper for sure. Makes a fella wonder… thanks tinman for another awesome vid. See you on the next one
Hey tinman love your videos and the question of the day I always pay attention never know what you could learn. Hope all is well. Picked up a 372xp will be going back through you vids carefully
The sound of that saw 4 stroking is the nastiest, most beautiful thing.
I got a Homelite logger saw from the 1970's.... you wanna talk about waking the dead...I can feel the ground rumbling when I set it down. And I got neighbors too.
That dog will hunt . Harvey is one cool guy
a mans, man right here
Lol
Man, DOES THAT EVER SOUND GOOD!!!
Man I'd love to load up a pile a my saws and come visit
I was watching Ironhorse build one. He's building a sleeper for Buckin Billy.
a saw anyone would be proud to have
Hey tinman. Hope you are well. You mentioned bouncing off the rev limiter. I would have thought this build would have an unlimited coil. What does it have? What’s your thoughts on rev limiters on saws in the 65-75cc range? I’ve been trying to find an unlimited coil for my 391 that I am working on. It’s limited to 13k but I think it would happily run a few more RPM than that after the port job. I would just tune it by ear in the wood and have a burble at WOT when I lift up. Do you usually do unlimited coils in your builds? Thanks tinman.
nice video saw sounds great i hope you dragged those trees out of the water before bucking he he
yeh baby live an learn .peace an love ,send it to ripsaw.
😎👍
It has been "IRONHORSED"! 👍
Loud is great, does it still meet US forestry spark arrestor mandates?
What makes this saw sound so bad ass?!?
If there was no port grinding what are the build specs?
A tin man question for you buddy I'm just learning how to adjust chainsaw carburetors the question I have for you is I got my saw to run but when I first started in the morning it will not fire up without me holding the trigger and giving it some throttle should I adjust the high or low and which way should I turn it in or bring it out the high or low also could have just be that I need to adjust the idle thank you so much God bless
Can you port my saw? I just want to hang it on my living room wall. Thanks from Beverly Hills. Can you sign it?
WILL PULL A 32” NO PROB?
Hey Tinman! Are you still just running 87octane with opti 2 in all yer saws?
I'm running 91 lately as thats the only ethonal free I can find. I don't find they run any different with the higher octane.
hello tinman I am probably one of your oldest viewers but love your videos I am 90 years young and I still work on chainsaws I have a Mccullough timberbear and the cylinder on the exaust side is a v grove in the roof of exhaust port about 3.16 wide and goes on up into the inside of the cylinder and tapers to a point about 3/4 inch do you have any comment on that I am pretty sure all timberbear have this and so does 610 exhausts opens sooner and slower
How do I remove a piston from the cylinder? If mouse urine was in there I’ve tried BB blaster acetone, tranny fluid still no luck.
Try kroil / oil
From Knano
A gunsmith's penetrating oil .
I think anyone wld be happy to own that saw. Ik I wld
Have you ever hopped up a 346xp?
Great great saw stk however wicked once turned up. My favorite husky ever in that class size
I wish y'all would keep your Canadian geese up on your side of the border I got mauled by one as a teenager swimming in a pond and they shit every where cool saw love it
50 decibels in total
When are you gonna get to a Partner 5000 Plus?
I have one some where here
@@tinmanssaws That’s what you said half a year ago too… GET A MOVE ON! No just yanking your chain, not literally though.. but you know what I mean
im fine with the tinman show the way it is growing but never show boating its my kinda stuff 👍❤🌳😜
The likes dont work on this vid. Whats up utube?
o machado e a motosserra (the axe and the chainsaw)
eli silva & zé goiano
composição: moacir dos santos / zé goiano
o machado e a motosserra tiveram uma discussão
motosserra diz que é orgulho da evolução
machado pra mim já era pois vem do tempo de adão
você agora só serve pra fazer calo na mão motosserra dá um ronco relou o dente no tronco já se vê o pau no chão
a serra chamou o machado pra fazer uma porfia
machado aceitou na hora e quando chegou o dia
entraram junto no mato pra mostrar a serventia
a motosserra roncava machado velho tinia
e naquele matagal foi só cavaco de pau pó de serra que subia
e esse grande duelo deste jeito é que termina
na briga das ferramentas o machado é que domina
motosserra parou cedo ali no tronco da quina
machado seguiu cortando mata grossa e mata fina
motosserra impotente rebentou sua corrente acabou a gasolina
que isto sirva de exemplo para toda humanidade
e você que é tão jovem tem que saber a verdade
respeite bem os mais velhos não brinque com sua idade
uma pessoa idosa também tem utilidade
é um diamante valioso se não tivesse o idoso não teria mocidade
Not wearing cutting chaps? Awe man, thats not too wise.
Chaps are ok but fallers pants like I'm wearing are not only more comfortable but provided a higher level of protection.
All you 372 husky guys. Its time to switch to a Echo 7310 hot rod... longer stroke more torque better filtration no auto tune, more ccs and cheaper to maintain....
No thanks
I got to say this video is the first time iv ever seen anyone run powersaw in yoga pants!! Lol
Hi Tinman yes super great saw 372 XP I purchase this saw because Buck’in recommended that saw
Was is favourites best one ❤✊✊✊🪵🪓