Glad you got it connected to play with it some more. Definitely nice to be faster than it was before, but still seems not quite as good as the Auto Trickler
I'm a little confused. Been watching a ton of Chargemaster link videos. From what I've seen the Link throws 99 spot on throws out of 100. This thing for $600 more throws 1 in 50 spot on. I would be very unhappy with my purchase as well.
Remember, the lesser expensive charge masters only read to one digit past the decimal. The match master reads 2 digits past, so it’s going to show you a little more, rather than just rounding up or down
They should have just inputted the most common powders so you could just pick the powder and that would be your starting point. After that just set how much you want.
I know this is a older video, But have you tried a reducer or straw in the smaller bore? I have no experience with the match master yet as it's in shipping. But on my Chargemaster 1500 I used a 3D printed sleeve in the bore that seemed to prevent overcharging with extruded powder when I set the machine to higher speeds I know it sounds counter productive however it still dispenses faster without overcharges. Is there any reason why you can't do the same on the Matchmaster? I know people also use McDonalds straws on the chargemaster which is also for the same purpose. Frankly if I was ordering a full price unit the supertrickler seems like the best bet and it's what I was planning on using until I came across the listing for a matchmaster for $200. EDIT: The matchmaster was cheap because it didn't have a hopper or scale plate. I figured I can print a scale plate and make a new hopper for it.
Your video looks very nice, enjoyed it! I was wondering if you need stepper motors, I'm a manufacturer and would like to work together.
Thanks so much Jack! I’d love to check out your stepper motors! Send me an email at stricklyreloading@gmail.com
Glad you got it connected to play with it some more. Definitely nice to be faster than it was before, but still seems not quite as good as the Auto Trickler
I don't know I think the Autotrickler V3 is the best..
Set the thing to 43.8 and let it go fast and then trickle if you have to with a hand trickle real quick.
I'm a little confused. Been watching a ton of Chargemaster link videos. From what I've seen the Link throws 99 spot on throws out of 100. This thing for $600 more throws 1 in 50 spot on. I would be very unhappy with my purchase as well.
Remember, the lesser expensive charge masters only read to one digit past the decimal. The match master reads 2 digits past, so it’s going to show you a little more, rather than just rounding up or down
They should have just inputted the most common powders so you could just pick the powder and that would be your starting point. After that just set how much you want.
I agree 110%
I would pay 99 cents a piece to download specific loads to the app.
Maybe those that can get it down to 10 seconds can post their settings for you to test on your machine.
GREAT idea! I’m all ears!
I know this is a older video, But have you tried a reducer or straw in the smaller bore? I have no experience with the match master yet as it's in shipping. But on my Chargemaster 1500 I used a 3D printed sleeve in the bore that seemed to prevent overcharging with extruded powder when I set the machine to higher speeds I know it sounds counter productive however it still dispenses faster without overcharges. Is there any reason why you can't do the same on the Matchmaster? I know people also use McDonalds straws on the chargemaster which is also for the same purpose.
Frankly if I was ordering a full price unit the supertrickler seems like the best bet and it's what I was planning on using until I came across the listing for a matchmaster for $200.
EDIT: The matchmaster was cheap because it didn't have a hopper or scale plate. I figured I can print a scale plate and make a new hopper for it.
Is ther a way to get rid of the light flashing ? that would annoy me
If there was, I don’t know how