Yeah man, it's no doubt these trucks are getting harder to find. Only 5 years made with a diesel and the youngest one are almost 30! The holy grails are turning into unicorns. You only hear of them... never see them. Truck looks good by the way.
My son has the exact same hat. 😂 He practically sleeps in that hat. He and I are rebuilding this old ramcharger that was Non IC 1st gen swapped way back in the day.
Later half of 91 was intercooled early half was not intercooled...also the vin tag is mounted to the dash, not the firewall, so that should stay with the cab .. here in Nebraska they need to do an inspection for all out of state vehicles and if that vin is missing or wrong then the title is worthless and they could destroy the vehicle because of it...
Yeah man. Use a wrench on the nut right below it if it’s a factory handle and she’ll twist off. If it’s an aftermarket one it might just twist without a nut there at the bottom
No, no, no. When I bought my 1990 1st Gen over a decade ago, it actually had a factory-fit Banks intercooler installed! Even Banks forgot that they made them back then. The pipe was 2.5 inch, with the internally squared intake horn facing forward. I modernized the piping with a Pusher 3" 1994-1998 intake horn (Had to modify the throttle bracket with a semi-circular cut from a machine shop), along with 3" pipe, 2.5" to 3" couplers, and a silicone 2" turbo to 3 inch 90 degree elbow. I left the original Banks intercooler in it because there was nothing actually wrong with it and ... It's Banks.
@@keeprtuned No. I can send photos of the original setup, if you like (I took before-and-after photos of my work). The intake horn was ridiculous by modern standards. A squared two inch by two inch opening.
You are right that the intercooler increases the density and how that happens is from hot air flowing through the intercooler and the air then cools down. Cooler air is more dense and therefore allows more air to be fired in each cylinder. Since the air is cooled off by the intercooler it helps to lower egt’s. Welcome to the channel
Oh really i never would have figured out that i should look for the truck that fits my need ? 4x4, extended cab ? So many decisions, holy cow i never would have known i need to figure this stuff out !!!!
89 and 90 only!!!!! They are incredibly easy to install intercooler, 3gen cooling system works great and they are by far the best looking! Chrysler messed up the look on 91 to 93s
Yeah man, it's no doubt these trucks are getting harder to find. Only 5 years made with a diesel and the youngest one are almost 30! The holy grails are turning into unicorns. You only hear of them... never see them. Truck looks good by the way.
Absolutely! They are good looking fun trucks!
Unicorns are a species.
Holy grail was one cup.
Yer backwards
91 had both Non IC and IC. That’s why some folks say 91.5
Good catch!
I have the roof , above Windshield rust .
Tough to fix and stop rust spreading.
Good job on video .
That it is! Thank you sir
Thank you for this. A 1st gen is my next find after I finish my 86 dodgeram charger.
They are fun!
I’m looking at one for 1500. It’s pretty beat though and been sitting.
Awsome video. Good information.
Glad you enjoyed it!
My son has the exact same hat. 😂 He practically sleeps in that hat. He and I are rebuilding this old ramcharger that was Non IC 1st gen swapped way back in the day.
Awesome! It’s a good hat! 😂 Ramchargers are cool! Good luck with the build!
Later half of 91 was intercooled early half was not intercooled...also the vin tag is mounted to the dash, not the firewall, so that should stay with the cab .. here in Nebraska they need to do an inspection for all out of state vehicles and if that vin is missing or wrong then the title is worthless and they could destroy the vehicle because of it...
The vin is on 3 places. The dash, the drivers side door well, and the firewall by the passenger side wiper cowl. It’s a metal vin tag riveted on
This is a very good , interesting and informative video. Thank you for taking time and effort to make it. American Iron all the way!
Thanks you for the support!
I worked out in bridgewater ol son ,use to see that 1st gen all the time 🤟🏽clean unit
Thank you brother! You got a 1st gen?
August 13th, 2022 1st gen event in Ladysmith, BC Canada
Let’s goooooo!!!
Does the shifter knob twist off? Looking at changing mine and saw yours was changed.
Yeah man. Use a wrench on the nut right below it if it’s a factory handle and she’ll twist off. If it’s an aftermarket one it might just twist without a nut there at the bottom
How much for the trailer hitch on the donor!? If in good structural condition
Derek.smith1@vivint.com
Shoot me an email and I’ll send you some pictures of it
No, no, no. When I bought my 1990 1st Gen over a decade ago, it actually had a factory-fit Banks intercooler installed! Even Banks forgot that they made them back then. The pipe was 2.5 inch, with the internally squared intake horn facing forward. I modernized the piping with a Pusher 3" 1994-1998 intake horn (Had to modify the throttle bracket with a semi-circular cut from a machine shop), along with 3" pipe, 2.5" to 3" couplers, and a silicone 2" turbo to 3 inch 90 degree elbow. I left the original Banks intercooler in it because there was nothing actually wrong with it and ... It's Banks.
Appreciate the info! Very cool. You happen to still have the banks intake horn?
@@keeprtuned No. I can send photos of the original setup, if you like (I took before-and-after photos of my work). The intake horn was ridiculous by modern standards. A squared two inch by two inch opening.
@@erwin643 I know what they look like. The intercooler was 50% larger than the stock one. Pretty cool.
@@keeprtuned Hope it wasn't a collectible item, or something. No one was interested in buying the original Banks stuff that I took off.
@erwin643 yeah, the intake horn alone is worth 500. It’s very collectible actually.
Intercoolers don’t cool off a motor. They increase the air density to the intake. Are you just making stuff up as you go ? Lol
You are right that the intercooler increases the density and how that happens is from hot air flowing through the intercooler and the air then cools down. Cooler air is more dense and therefore allows more air to be fired in each cylinder. Since the air is cooled off by the intercooler it helps to lower egt’s. Welcome to the channel
hey do u have some of those parts for sale ? im interested on the grill and front bumper
I do have a ton of parts for sale but I don’t have a grill or front bumper available at this time
Could I possibly buy the seals around the doors!?!
Yes shoot me a message on Facebook!
I just inherited a 92 12-valve automatic le with only 92500 miles from my grandfather thank you for the video
The market for that here would be 1500
I'm also interested in the roof
The cab is pending
Man where I am from we would have restored that extended cab , lol it’s mint compared to what we find . Nice trucks man , cheers from Canada 🇨🇦
Thank you sir! The cab with the clean title is going to a guy that will be putting another 1st gen on the road
anyone does a lot of work on old cummins vt350 in Texas?
Vt350? Also welcome to the channel!
Oh really i never would have figured out that i should look for the truck that fits my need ?
4x4, extended cab ? So many decisions, holy cow i never would have known i need to figure this stuff out !!!!
1989-1990 only!
Are u selling the bed ?
Just sold last week brother!
89 and 90 only!!!!! They are incredibly easy to install intercooler, 3gen cooling system works great and they are by far the best looking!
Chrysler messed up the look on 91 to 93s
Are you interested in selling one of those grills?
Yes I will have one for sale when I get back from vacation in a few days!
Great trucks. I’ve own many of them. I live in California I’m interested on one of those grills.
I'm looking for a ome grill like that
Want to sell that grill
How is it doing now, a year later?
The truck or the truck market?
@KeepRTuned oh the truck. I've got a d350 so I see the market everyday 😄
I actually sold that truck since then and picked up my W250!
2wd rides so mucb nicer too.
No lie there 😂
Good video I’m doing a roof repair as we speak do you have social media when we can support you
Not yet, just my personal channel. Subscribing and spreading the word helps a lot