Vintage 70's Big Block Jet Boat REVIVAL! - Engine Full of WATER
Vložit
- čas přidán 18. 08. 2022
- Go to buyraycon.com/jyd for 15% off your order, plus free domestic or flat fee international shipping. Brought to you by Raycon
Today we bring a 1970's Jet Boat back to life!
MERCH! www.junkyarddigs.com/
Send us stuff!
Junkyard Digs
PO box 1623
Ames, IA, 50010
Follow the gang!
Junkyard Mook:
/ junkyardmook
Dylan McCool:
/ dylanmccoolvideo
Cars and Cameras:
/ carsandcameras
Thunderhead289:
/ thunderhead289
TheCriag909:
/ thecraig909
DeBoss Garage:
/ debossgarage
Lucore Automotive:
/ lucoreautoandlucoreracing
The Old Car Channel:
/ classicmustangs429
#boating #revival #junkyarddigs - Auta a dopravní prostředky
Go to buyraycon.com/jyd for 15% off your order! Brought to you by
Raycon.
Can't wait for the harvest!!!
how about extended use? do they start to get irritating after 2-3 hours? like a long drive or if a job takes longer than expected?
@@spritethekite9943 as with any earplugs I usually have to take them out for a second after 3 hours, but they're better than any other brands I've tried! They also come with a number of different size gel tips
How do you do all of this I try my ass off at fixing my projects! How do I become as good as you at fixing things? Did you go to school? I was a jet mechanic in the navy and I still don’t know as much as you! Point me in the right direction, please!
Sry but when you said reliable f150 I laughed so hard I nearly shit my self
ITS NOT A FUCKING FROST PLUG ITS FUCKING FREEEEEEZE PLUGS
Also new = less reliable guess those 26 years didn't teach you half of what my 7 have
Aww, heck! Kevin found a way to avoid doing brakes for once!
Darn man
Lmfao, too true though 🤣
Underrated comment of the post !
Hang on, there's still brakes on the trailer. Next video!
Gotta have brakes to get to the lakes!
The square body hooked up to the 70’s model jetboat is such a vibe
Looks almost one of those old Tonka toy sets with truck and trailer
now they just need to paint the jet boat the same color
I've got a 1973 Chrysler tri hull fishing boat and I'd by lying if I said I hadn't been passively looking for a similar vintage Dodge to pull it with..
I remember those. Not much for fishing, or skiing, or a relaxing trip with friends, and not popular with quiet boaters, but they converted 20 gallons of gas into noise faster and better than anything else.
👆Best comment here👍
Not much skiing or relaxation with friends?!! Tell us you have never been young and enjoyed a jet boat with family or friends. Phenomenal ski boats. They were family ski boats in the 70’s. I bet you’re a real blast at parties. 🎉
I remember seeing so many of these 70’s jet boats on the lake every summer when I was a little boy in the 80’s. I always thought they were the epitome of cool especially with the big chrome Bassett headers sticking out the back. Then slowly the ugly ski boats took over as these nostalgic jet boats faded away. Summer’s were never the same again. Thank you for reviving one of these sexy boats from yesteryear.
I remember those day's as well there sir. Yeeeehaw.
They still rule the rivers in havasu/Parker area !
I was a real little boy in the 80's. I like some of your bookmwrked Videos on your channel Jeff.
"I don't know anything about boats, and Angus doesn't know anything about self-restraint"
Perhaps my favourite quote ever on this channel. 🤣🤣
What ever could go wrong?
That jet looks like something the main character would drive in the opening of a 70’s spy/action tv show
GTA Vice city lol
Jonny Quest 😂
Pink Panther
Not sure if you ever come back and read comments on these older videos you have put out, but this video reminds me of a story I would like to share. About 30 years ago when I lived in Dallas, my neighbor across the street was kind of a strange character. I came home one day to find him out in front of his house looking at a jet boat just like the one in this video that he bought and drug back home. Had the exact same set up with a 455 in it. Same exact problem. Milk shake oil. He bought the boat for like $500 and hoped I could help him put a new engine in it. Luckily for him I had a good mechanical background and agreed to help. So he goes out and buys a long block crate engine for it. I think he paid about $900 for it. Again, this was about 30 years ago. So we remove and replace the engine, and one of the things I remember was having problems with initial start up. I recheck the firing order 3 or 4 times and kept scratching my head. Then I pull the distributor cap off and have him tap the key. DANG it I forgot these engines turn their rotors backwards as compared to Chevy's which is what I am more used to work on. So I fix the wires and bam it fires right up. So off to the lake we go. As soon as we back the boat into the water, I am getting worried. The wind is blowing like crazy (like it always does in TX) and waves start to crash over the stern which is only about 4 inches out of the water. Of course they don't have reverse and they are always in gear when the motor is running, so we finally get it turned around with a paddle, fire it up, and off we go. That thing ran great!!! We had fun playing with the trim and shooting a rooster tail 50 feet in the air. Ran it for about 30-40 minutes and then headed back to the dock. Got it back on the trailer and pulled it out. Checked the oil. Milkshake again!!! We were like DAMN that SUCKS!!! At that point, I figured it had a cracked intake manifold since that was the only thing we reused off of the other motor, but my neighbor was done with it. We got it back home and it sat for about 4 or 5 months and then he sold it. He showed the guy who bought it the water in the oil and told him the whole story. I think he still got about $1,500 out of it so he didn't lose any money just our time and lots of aggravation. I am hoping the guy that bought it was able to fix whatever was leaking (might have just been the intake gasket I don't know). This video brought back a lot of memories. Not all of them good but not all of them bad either. LOL!!!!!
That is legitimately the most American sight that I have seen in many moons.
It's a boat, with little to no purpose on the planet earth, making high speed laps around a large body of water, all the while making what I consider to be an obscene amount of noise.
In short, good work guys!
Maybe not the fastest boat on the lake, but definitely the best sounding one🤘🏽so violent
The transmission in that camper was a TH-425. It's a TH-400 with a 180 degree chain drive to make it point forward and then the center section of a rearend bolted to the output. The front suspension that goes with those transmissions is very similar to old GM 4x4 front torsion bar suspension. Those transmissions were used from '66 to '78 in the Toronado and the Eldorado.
I was going to mention the same thing for the motorhome motor and trans came out of a tornado
@@miketate9901 The entire front suspension and drivetrain was from a Toronado. Those factory built GMC motorhomes that GM made from '73-'78 also used that same Toronado setup.
@@cadman10000 And it was the RV in the movie Stripes.
@@jasonyoung5628 The EM-50 Urban Assault Vehicle.
@@edwardpate6128 Wrong motorhome - that was the GMC motorhome - same front drivetrain, different body
This was one of the best junkyard digs episodes ever made. AWESOME JOB guys
Agreed! Fun to watch something we all want to do! Find it, tinker, try it, perfect it, send it!!!
Man these things were hugely popular in the 70's. Seems like many of them had 455 Olds engines in them.
Look up Parker Arizona. They are highly popular Now!
I had a 1970 Schuster sidewinder..390h.p. 455 rocket.. Torque was 550fp.. Berkeley 12jg jetpump AA impeller..ported bowl..aluminul Berkeley water cooled manifolds..thru hull exhaust with no mufflers..and jetovator trim..This thing was extremely fast and loud
@philrazzi7782 pretty much all up and down the Colorado they're going strong. I'm sure that's due in part because of the shallow hull.
@@davidross-oo2vhI’ve got a 455 with a Berkeley too. This one in the video really didn’t ever seem to be running right. Seems very weak compared to mine.
I had read that they used the Toronado engine/transmission power pack in RVs, but had no idea they made them front-wheel drive too. Would have been hilarious to watch you drive around the front half of the camper before taking the engine out. Thanks for the great video!
It’s a pretty cool design to because that gives you a lot more space in the rear.
The GM Truck and Bus division made a GMC Motorhome from 1973 - 1977 using 455 (73-76) and 403 (77) Olds Toronado Drivetrain packages. They were FWD and came in 23 ft and 26 ft versions. They were much easier to drive than a standard Class A motorhome because the FWD architecture allowed for a lower overall vehicle and a low center of gravity. The most famous one is the EMD-50 from the movie Stripes.
@@lawnmowerdude Or, hear me out, in the front. Put that setup in the back of a Fiaro.
@@KacerRex its been done before
@@nathandube1685 Wait... HOW?? the fiero could barely fit the v6 transverse it had, granted a 455 in a fiero would be something, but holy moly basically you turn 80% of the car into engine, and i imagine all weight balance goes right down the shitter
I have to admit Angus is getting better on camera. Excellent video today got the boat haulin ass. Many big buckets to you. One of the best videos you've done in quite some time🤣👍🇺🇸🍺
He is so much better that the first solo runs. Congrats.
That moment you realise Kevin missed the opportunity to drive the front half of a front wheel drive camper around a field!
This must have been so much fun doing. Angus is a perfect co-host!
The part you are referring to as a windage tray is actually a valley pan, you'll find a windage tray in the base of the engine under the crankshaft if so equipped.
And for people asking what for it stops oil from cavitation and producing air in oil.
What a windage tray does is keep oil away from the crankshaft... anytime the crank splashes through oil, the engine encounters a reduction in power. Cavitation? The crankshaft shouldn't ever experience cavitation - if it does then you've got way too much oil in the crankcase! Peace & good vibes! ✌🏻🤘🏻👍🏻🇺🇸
- Max Giganteum
^ This actually just keeps hot oil off the bottom of the intake
I'm learning things!
And on a Buick with the pcv valve in the intake you WILL suck up oil through the valve without the valley pan gasket. Either use it, use fiber gaskets and a lifter baffle TA performance sells, or delete the pcv which isn't really recommended.
For a second I though you were gonna get the RV running and drive the front end around. 😂😂
Me too.
I was kind of hoping for a scene of that as well.
buy ev rv
@@sharonbraselton4302 what
I’m surprised at just how quiet the boat is
Legit
What I can’t here you my ears ringing are too loud
Ikr
That's because it's got log type wet exhaust manifolds with OT exhaust tips as opposed to headers. If it had headers it would be a lot louder!
Pulling the engine out of the camper and Jessie steering it has got to be most funniest thing I've ever seen 😂
Did you ever give Dave a call back with how the boat is running? If so, hope is very happy hearing his grandfathers boat running.
I did indeed learn something from watching this video... I learned I have no self control and immediately started scouring marketplace for old big block jet boats... heading to ohio, brb... and if my wife is reading this... I'm definitely not picking up a project jet boat in ohio... its... a gift... for someone else.
Any update on this generous gift giving?
@@eyepauper Got intercepted before I could leave the driveway... Unrelated note, if anyone knows how to make a 97 Cummins whisper quiet, I have a friend who may be interested in that knowledge... One day I'll find one of these units to gift to my friend that's close enough to make a reasonable excuse about needing a shower head from the hardware store or such.
wife liké piçknic boat 37 fit jet yaggt ac gebrrtor ac tvs fsd wayrr naker
I am having the same issue with 70s era jet /olds 455 setup. This is exactly what I’m going to do to get me back out on the water! Thank you JYD!!!
ñpop v1² lamghi boat e ging jey drive
Sweet jet boat recycling. That oil 🤔 er milk shake was incredible , ive never seen any that bad. Great come back...
buü picñiç boàt jet yahht fir mílk shake
Nothing like watching jyd at midnight while at work in the uk and been impressed with how smooth Kevin pulled off the raycon sponsorship
I'm so so confused watching the exhaust blowing water out that looks insane to me lol...who thought of that? Have to add that motor is pretty amazing with all the years of water in the oil still running like a champ you have to be impressed. As mechanically inclined as I think I am I learn something new every episode you put out.
Wet exhausts on boats is pretty much a must. You're spending most of your time over 3500 RPM, so the exhaust would get red hot and catch the fiberglass on fire - that would be a bad time. It's less important for this open engine compartment 180 header setup, but still, fires on boats are a bad time.
So does the water run thru the engine and then into the exhaust or does it run water separately to the engine and exhaust?
@@JasperFromMS Think if you see the front of the cylinders that is the exhaust manifold there is a hose on each of them so my guess water is pumped in and pushed out via the exhaust.
@@Cyberdeamon That's what it looked like to me.
@@KameraShy Generally the water in the engine is pumped through the manifold on its way out, boats engines tend not to recirculate because... well the reason they dont need to is kinda obvious, and the best way to make the water leave is to just pump it through the exhaust, those tubes might be adding some cool water that skips the engine, but in all liklihood those tubes are essential because that is how the water is getting from the engine into the exhaust, as far as i know the olds 455 doesnt allow coolant to flow to the exhaust normally so those tubes are probably the output, since they are coming from where the water pump would have been.
The RV was pretty sweet for free it's better than a tent . Very entertaining videos thank you we look forward to watching them. Awesome positive entertainment.
Good work 👏 *
buy ybé ev rv
Being a little on the old side, I remember a tourist promo film about New Zealand where they took jet boats up rivers and skidded over sandbank as no prop. Such a lovely boat and a fantastic engine. Awesome episode!
BOP engines are underappreciated gems of their time. Its amazing how well that thing runs, given the amount of water in the oil and gas (at the beginning).
The real question is, what to do with that spare 455.......
He should keep the th425 and 455, make mazdarati 2
Well the boat does need an anchor...
Put both engines in the boat and make it a twin engine jet boat
go kart build?
@@menogusta9829 I second this
Oldsmobile engines are actually pretty scarce these days, a few months ago a buddy of mine needed a "small block" or "short deck" olds engine, we really wanted a 403 or atleast a 350. For weeks the only engine he could find that was in running condition was a 455 but I said no way, it would have been too much to swap into the car because the car was set up for a short deck engine because it had a 350 olds in it ( the accessory brackets and the exhaust was the main reason why we needed a low deck engine) so he kept calling around and after we gave up for a bit the junkyard got in a wrecked car that had a low mileage roller cam 307 engine, I was not thrilled about it but it was very clean and after we put it in, it actually ran way better than I ever thought, it was super quiet and smooth and felt just as strong as the wore out 350 we took out. So in my opinion if you ever need an olds engine that is reliable and will get you down the road, try to find an 86-90 roller cam 307.
go fir 350 lrss gss mlóre mkg onger rsnge
I usually read some comments while I'm watching and I gotta say it is awesome that this many folks have the knowledge that can truly be helpful. I applaud every one of you legends. 👏🏾 thank you for helping Kevin in the background. I mean, heck, some of the info we bring up might help make the next episode possible.
Kevin and Mook, love you guys. Your brother from as deep south as it gets- T. 🤙🏾
Absolutely LOVE the boating content. This video and the free boat that was hooked to the truck that you worked on with Vicegrip garage was awesome as well. Not a lot of boat revival content on CZcams, Keep up the fantastic work you guys!
I really Really REALLY hoped Angus was going to pull the boat out with the snowmobile 🤣👌. great update 2x👍
bbuy2 eltrrcßnow mobies
That boat looks perfect being when it’s being towed by the square body
Had one dem boys. A Hallett with the 455 & Jacuzzi pump. My biggest regret was putting on those pipes. The noise drove me and everyone else crazy. Second mistake was blue printing the pump. The motor couldn't handle it and I spun a bearing. Bought the boat new $5200 trailer and all. Best money I spent was on a boat cover. The gel coat looked new for many years.
A Whacker in jean cutoffs and sandals manhandling a snow mobile was not something I expected to see today...
That boat is a beast! Thanks for the episode.
Love today's, Jet boat, content.
But what I actually Love the MOST..... The Brown Chevy Truck. The Truck that actually towed the Jet Boat around.
Nice to see a Chevy truck!
I know that Mook is working on a F250 but I would love to see her work on the 73 Chevy Nova. I use to have one.
Put in posy trac/sure traction in the Nova.
I watched her latest F250 Dump Truck video. She is waiting on parts.
biy f25⁰hybred eltrc f²⁵⁹
Spent a few weeks every summer on the Shuswap lake in Canada. In the '70s, big block jet boats were everywhere, some sending rooster tails for 30 yards... and oh that sound and that speed. Nothing else like it.
With a boat that has water in the oil, I have found that draining it, filling with diesel fuel, running it for a short while, rinse and repeat a few times. The diesel soaks up the water, still provides some lubrication.
notification squad, Have a nice weekend!🔥🔥🔥
Enjoyed every minute of this. Love the long videos! Thanks to all of you in the JYD Family. Can't wait for the next farming video!
Awesome job, guys....grew up late 70's on the north shore of Long Island...that boat rocks! But not as much as Angus's square-body! Hugs to y'all...keep up the good work
You can definitely reuse old head bolts. Worked at an engine shop where it's commonplace to use vintage headbolts. Modern aluminum headbolts are the ones that stretch worse..
I appreciate how you are always mixing it up on this channel and unafraid to tackle something different.
In this episode, Kevin sends a batsignal which draws the attention of Mike Finnegan with the utterance of the words "jetboat" and "big block Olds".......
Well done all, amazing what actually looking at the engine can reveal, and with proper repairs you've got a great boat. It seems a far cheaper option than wasting oil. Congratulations and happy boating.
Best video from Junkyard Digs.
There IS hope for the next generation.
Cheers...
Kev looks like he is tired and i love the fact it looks like he had a few canned wobbles
One or two later in the day lol!
Hey Kevin love your videos really got me into old vehicles and soon I hopefully will start doing revivals of my own :)
Lmfao at Angus's V6 Boat being faster then the big block v8 jet boat 🤣🤣 @Junkyard Digs
Glad to see you got that big block classic back on the water and performing as it was designed to perform. Hope you have many happy years of boating ahead. Great revival!!!
That's a damn good looking square body!!!! Sounds good too.
That truck looks good I’m usually not a brown guy
Sure is👍Chevrolet 💯💪
Awesome boat! My dad has a beautiful 19 foot DayCruiser of a similar vintage (1980 model) he bought new in early 1980. 350 Chevy with a mild cam and an edelbrock carb that allows it to run on 87 octane (with the factory carb it would only tun good on premium), mercury outdrive. Its a lot of fun.
I was talking to my pops about this boat and he had a suggestion: bigger oil pan with a HD oil pump and modified pickup. These Olds 455s were infamous back in the day for being oil starved in marine applications because being in a boat theyre always on an angle and these Olds big blocks HATE that and will blow up in short order if the oiling system is unmodified.
That 70's square body and the 70's jet boat make a perfect couple.
Who else feels sorry for the Tiara? The truck/boat combo is perfect though.
Been watching this channel since Covid started and it keeps getting better .
Dude!!!! That camper was awesome!!!! You're lucky we got to see Angus run. 😂
One of the rare videos where Kevin doesn't do brakes.
That revival looked like a lot more fun than getting mouse poop blown all over you from the vents of a car or truck that had been sitting 20 years. 😁
Yeah, and more relaxing to work on, just lying next to the engine
That was really a fun episode! I’ve always loved those old jet boats!!
That camper looked amazing. It was awesome.
What a great revival!!! What a blast you're having at the End!! Job well done!!
Keep that trans and axles for a big block corvair! 😊
Great video and really fun to watch now with all the sand in that motor and being as old as it is you will probably need a new impeller that will probably give you a lot more speed.
Was thinking the same thing all that sand in motor and oil has to be eating up those crank bearings n piston tubes.maybe itll flush out,but it would take complety pulling up motor to totally clean out.good thing they have a spare.guesse they dont care.snooky💥👍💥
@@allensnook7760 the sand is in the cooling passages and that engine would probably run with zero oil in it for about 30 or so minutes before it gave up
Awesome Angus is going into the shake business his 1st flavor 10w30 vanilla 😋. Nice side hustle and for once Kevin and Mook get away from brakes
Mook is absolutely hammered by the end of the video.... Much like I currently am, being that its 4:30am and 12 beers later here. BUCKETS!!!! LOL
Fantastic episode. Makes me wanna find an old California jet boat now. Lol. Would love to watch you guys take a buffer to that boat in a future episode to see the gelcoat pop once again!
It’s like Kevin reads our minds and knows exactly what would make the best content!
you KNOW Cleetus will buy that thing in a heartbeat from you guys!!!!
Glad you got the Olds 455 out of the RV, it sounded like a good engine that needed just a bit of help. I'd LLP OP the heads and dog the cylinders & valves to keep it from rusting up.
I'm very disappointed that you didn't throw 3 plug leads & a boat tank at that camper front end, & then drive it round your field for a bit to test the engine...
I got hair on my chest just watching this video.
I couldn’t stop grinning over the guy on the phones THICK Wisconsin accent. I love it. And love Wisc.
Awesome video I enjoyed watching it with my dad. I hope Scott sees the video of the boat running across the lake.
Great content, really enjoyed the journey! First time I have seen a boat that wasn’t a money pit.
They blew $400 on a "free" engine... and we don't know how much money they paid for the boat? I don't even want to think about how much the bill was for the gas used during the trip. Or the bar bill. I think I've concluded that yup... boats are expensive! 😁
- Max Giganteum
A new impeller would probably add a few MPH but would probably double the cost of the boat as well. Great video! I want a jet boat and buckets now. :(
I had a 17ft wrighdt stinger with a 455 Olds. It has an AA impeller in the berkeley. 80mph was 5200rpm. That engine made a hair over 500hp, was first run in my 442 street/strip car. It went 11.80s @113 at 3740lbs. About 520ish hp. That AA impeller would easily support 700+ hp and go well over 100mph
Kevin I love watching all of your videos and seeing you interact with your friends. I’m born and raised in Iowa so I love seeing all the Iowa businesses succeed.
Nice boat now. I wish we lived close to water like ya'lls. Good job gentlemen.
Notification Squad!! You guys always make my day when you upload. This video will definitely be interesting probably with a bunch of calamity and shenanigans as usual.
Sweet Vintage Jet boat! it sounds sick & FAST!
This is one of the most American videos on CZcams n that Kevin has done you got 2 guys working on a vintage jet boat getting it back on the water acholic beverages a bald eagle n the ruthless roofer's lol GOD BLESS AMERICA!!!!
Probably one of my favorite videos on the channel since I can see what’s happening with the engine a little better
I had a 1976 19' NorCal with a big block 455. Even after heads and a Demon carb it was still a giant turd. It sure looked and sounded the part tho.
Needs a 2nd gen 572 Hemi with a Holley Sniper Marine system and some bolt on goodies. She'd dance then!
Angus is so cool ! I just Love him.
I had skipped this video for a while because I didn't realize it was JYD. I mean, a boat? Really cool, love it.
Any updates on the corn?
I wonder if Scott (I believe) would like to get his grandpa’s boat back?Hopefully you let him know that you got it running again.
I think you guys trying to help put old vehicles back on the road or water is great! My family has so many cars that need to be restored to run again but my parents are elderly and I have nerve damage making it hard to get it all done plus i am inexperienced. Some day I will eventually get all of the cars back on the road but it will take me years. Keep up the good work guys!
Awesome renovation of an old time speedboat thank you for the insight on the big block motor that will help and one of my next build. Thank you very much and awesome awesome build thank you Burke Johnson.
Been looking forward to this video since the first photos on IG! Warning Flatland Fools on the water!
That set up would have been great to put the big block in the back of a corvair. 😥
GMC made a popular camper in the early '70s. All-fiberglass body with that Olds drivetrain. Those FWD units were designed, right off the bat, to be used in heay-duty applications. They're damn near indestructible. If I remember right, back in the '90s, the serious Honda guys used to grab those CV shafts and have them machined down to fit.
kev when u said give her the shit followed by anguses uneasy "Ok" i bout died laughing that was funny i love this channel youve taught me more about old cars then i could have ever dreamed of as a kid. long live junk yard digs you guys are awesome.
59:19 Your credit card is there in plain site.
Nothing like ruining the suspense of a video by showing it in the water and running right at the start of the video...
Sickest revival in a while. Love those old boats! MORE!
My boat lost one on the lake last summer, bout sank the damn thing before we realized it, got that fixed, damned bellows hose popped. ThT sucked worst than freeze plug. Great vid you two, can't get enough!!!
Oh look!!! It’s a boat… when you start doing boat revivals you know your out of ideas for the moment…
Personally I like the variety in the videos... Occasionally I even buy a different flavor than just vanilla ice cream
@@bigbob16 i don’t like boats, trains or planes.. I do like Cars, trucks, motorcycles and military vehicles/ 18 wheelers… the rest are money pit’s
its great how both of the older guys at 54 mins had big ol smiles