Italeri 1/9 Harley-Davidson flathead and Harley Lady
Vložit
- čas přidán 9. 07. 2024
- Italeri 1/9 Harley-Davidson flathead and Harley Lady
#scalemodel #harley #flathead
*Index
0:00 Prologue
00:42 Wheel
02:43 Brake, Sprocket
04:02 Engine Frame
08:05 Carburetor
10:22 Primary Cover, GearBox
11:49 Frame
13:17 Fender, Stop lamp
16:35 Springer
17:17 Handle Bar
18:21 Headlight, Horn
20:00 Exhaust
20:30 Kickstarter, Foot Brake, Clutch
21:46 Shift Pedal
22:27 Fuel Tank
23:38 Meter Panel
24:51 Gear Shift, Oil line, Gas line
25:33 Seat
25:50 Tool Bag, Baggage
27:36 Harley Lady
34:03 Route 66
37:00 Complete Photo
The second rider to travel by motorcycle is an American female rider.
Harley-davidson flathead
750cc W-series Harley was produced from 1937 to 1952.
Initial production is over 100 years old.
I think moving flathead will become fewer and fewer in the future.
Italeri 1/9 Harley WLA
In Japan, it becomes available for purchase on mail order sites once every few years.
When I look at online shopping sites for overseas models, I see that they are in circulation, but the Italeri site currently shows them as OUT OF STOCK.
Since it was made once, there are some imperfections (the chain and seat are made of soft vinyl), but the quality is high.
Being able to build a Harley from this era is valuable and makes me happy.
Complete image
Rider is 28 years old, single, and lives in Chicago.
Her pets are a calico cat and a canary.
Her treasure is her grandfather's inherited Harley Flathead.
This Harley was supplied to civilians by the military after the war, and this Harley was restored by her grandfather.
His dream was to travel Route 66 ride on this Harley.
However, he died without being able to come true his dream.
She is a woman who sets out on a journey across America to make his dream come true.
The complete image is to travel along Route 66, known as the Mother Road, which is full of American culture, in a Flathead built by my grandfather, tracing the history of the gas stations, motels, and diners of the once prosperous era.
↑(This is True story)
Making
I changed WLA to WL.
It's been a while since I've made 1/9 scale motorcycle model.
1/9 scale is easier to add details than 1/12 scale, but the larger the scale, the more difficult it is to paint.
If you increase the density of a small-scale model, you can disguise the painting with a sense of density, but if the visible area or gap becomes large, the texture of the paint will affect the result, so consider the level of painting gloss and color tone.
Considering them is a difficult task.
Engine
All cable connections have been replaced with aluminum pipes and metal wires.
The minus thread is made from a 1mm plastic rod.
I wanted to make it batteryless, so I cut the magneto out of a plastic square rod.
The generator was repurposed for headlight and taillight useing. When the engine stops, the light will also go out.
Carburetor
I added some details while looking at the photo of the linkert cab.
I used a cup from a dollhouse for the funnel, but when I assembled it, I realized that it was a mistake and obstructed the place to put the feet, so I remade it with a hose fixing bracket.
Wheel
Made with 0.4mm stainless steel spring wire and 0.4mm electric wire sheathing.
When the scale is 1/9, spoke replacement becomes easier.
Seat
I made it with plastic boards and putty, but when I tried to assemble it, it didn't feel right, so I ended up using parts from the kit.
Light
I reversed the positions of the front light and horn.
Next, add an on/off switch to the light.
The stop lamp was made using kit parts and putty.
Piping
Made from 1mm brass wire.
Painting
This Harley is uncle's inheritance, so it has a mix of old and new parts, so the old parts is painted old.
I wanted the gas tank to have a hand-painted red stripe, so masking was Roughly.
The rear fender was painted with original paint and rust painted.
Weathering is strong overall. The new parts were painted with light weathering.
luggage
I was watching videos related to Route 66 on CZcams, and it seems that the route can be completed in about half a month.
There is no camping style, and hotel stays are common, so I kept my luggage light.
Figurine
It's a 1/9 scale figure, so it's a big figurine.
I used cloth for the pants.
I used Sculpey for the face and body.
I used wool for the hair.
I had her wear an aviator beanie.
Diorama base
Since the diorama was 1/9 scale, and I didn't have a place to put it even after it was completed, I was worried about making a diorama, but since I wanted to draw Route 66, I only made the roads.
Next time I haven't decided yet because I can't imagine it.
Thank you all of you! - Jak na to + styl
Beautiful bike. The girl figure is a work of art. I love your videos 👍
thank you!
This is the nicest comment.
I will continue to create good works.
thank you very much!
i think he could make a living making figurines
A wonderful bike! 👋 👋 👋 🔥
Thank you❣️❣️
amazing work you are an artist
Thank you so much for your comment ❣️
Your skills are so fantastic. Congratulations :-)
Thank you so much 😊😊
Exceptional sculpting and weathering skills, a true artist!!
Thank you so much for you❣️
Absolutely amazing construction and weathering, a first class build!
Thank you so much ❣️❣️
B E S T I A L ! ! !
Thank you !!!
@@scalemodeler for nothing 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
このチャンネルのすごいところって筆跡だったり手作業のラフさを本物の味に昇華させてるとこよね
スケールモデル、特にカーモデルなんかだとそういうメソッドは本当に希少
ありがとうございます！
そこまで見ていただいて、感激です。
CZcams やってて良かったと思えた瞬間です。
今、イラスト集「鳥山明の世界」を模型化しています。
また、お時間ありましたら是非お越しください！
お待ちしております。
ありがとうございます！
今回は1/9で、さらに、超絶なディティールアップですね🎉技術が高いせいで、とんでもなく難しい事をしているのですが、簡単に見えてしまいます。
コメントありがとうございます。
いえいえ、私のディテールアップの100%はアルミパイプ、真鍮パイプ、金属線、プラ板、プラ棒を長さに合わせて切っているだけのコスパです。
塗装もレイヤー塗りが基本で、混色はほとんどしていません。
時間制限のある動画なので、悩んでいる所は端折っているんです。
最近、粘土を覚えましたので、アドバイスとすれば、パテでの造形はやめて、スカルピーを使ってください。
今まで難しかったところが簡単に出来てしまいます。
ありがとうございます！
@@scalemodeler ご返事ありがとうございます😊アイドリングが聴こえます。
Professional 👍
Thank you❣️❣️
Sensationell ⭐️⭐️⭐️⭐️⭐️
Thank you so much ❣️❣️😊
約40年くらい前に模型屋さんで、このキットの存在を知り、次の給料日に買おうとしたら・・売り切れてしまった
次の輸入入荷予約注文したのだけれど、２０年待っても入荷されない・・更に数年後は、お店自体消滅・・
模型人口も模型屋さんも劇減りですからねぇ・・当時ネットも通販も普及されてない？・・４０年越しでアマゾンで見つけて購入しました。フラットヘッドのヤレ感最高ですね、スポークが光りすぎていますけどね、自分はオートバイはスポーク派なのですが、若い時はスポークだけは錆させるの大嫌いでしたが、年とともに気にならなくはなってます。
模型の楽しさ,素晴らしさが伝わる活動に感謝します。ありがとうございます。
40年まえですか！そんなに古いとは知りませんでした。
私が知ったのは鳥山明氏のイラストで、たしか、鳥山氏も1/9WLAと1/35WLAは凄いクオリティで作っていたはず、と思います。
そんなこんなで、作っている最中に訃報を知って、あのイラスト通りに作れば良かったと後悔しています。
次はあのイラストを目指して作りたいです。
コメントありがとうございます。
また、お時間ありましたらお越しください。
最後の一文、こちらこそありがとうございます！
@@scalemodeler 鳥山明先生の1/35WLAの題名はたしか？ハイヨー！シルバーでしたね。
あれは本当に凄いです。自分はイラストの模写も趣味の１つなので本当にショックでした。
Easyさんのハイヨー！シルバー楽しみにしてます。
Fabuleuse réalisation mon ami du Japon 😊👌👍
Merci d'être toujours le premier à regarder !
Je te suis toujours reconnaissant.
@@scalemodeler merci mon ami , c'est un gentil compliment🙂 ! Tu es vraiment doué tu es un véritable artiste 😆👍
dude this bike is so cool looking. keep up the good work
Thank you. I'm very happy.
I got courage from you!
just the frontend is a masterpiece
Thank you goodness ❣️
Incroyable travail, quelle dextérité, bravo mon ami, encore un perfect 😉👌🔥🔥🔥
merci.
Les Harley sont mes motos préférées, alors je m'amuse à les construire !
Vos commentaires sont très encourageants.
@@scalemodeler j'ai cru comprendre ça vu tout les détails, pas de quoi c'est mérité mon ami 😉
Fantastic 👍👍👍
Thank you❣️❣️😊
bonjour ces splendide magnifique quel talent bravo jadore vos video
Merci pour votre commentaire.
Vos commentaires me donnent toujours de l'énergie.
Je suis très heureux et honoré.
merci beaucoup!
A fantastic new build from you sir, it`s great to see your skills and the new figure.
Thank you for your continued comments.
I am still a beginner in figure making, but I will continue to refine my skills.
Next, I would like to make Akira Toriyama's illustrations three-dimensional.
cool bike man, coool bike 🙂And yes, I have seen the magneto ignition. Had a similar on my Panhead.
Panhead is my favorite Harley.
Unfortunately, I can't make one because I don't have a Panhead model.
Magneto's Panhead is a match made in heaven.
Thank you for your comment!
I have one of these WLA's on order, I'm planning to convert it to a civilian also. You have done a fantastic job as usual. Where did you get those tank decals, did you print them yourself?
For the decal, I searched for the Harley logo on the internet.
I print it on a commercially available decal sheet and use it.
If you don't have a decal sheet, you can make one by printing on photo printing paper and peeling off a thin layer of paper with a design knife.
Thank you for your comment!
Your model will definitely be a great success!
vous êtes un maitre ! vos réalisations sont exceptionnelles.
merci.
Je suis très heureux.
Si vous avez le temps, revenez s'il vous plaît.
Désolé si j'ai utilisé le mauvais français.
Fantástico trabajo 👌🏻👏🏻👏🏻👏🏻👏🏻👏🏻
Gracias por tu comentario.
¡Estoy muy feliz!
Another amazing build. Do you seal with a clearcoat between your weathering washes?
Yes, it is.
After weathering, I applied the decals, weathered the decals, and applied a clear coat.
thank you!
👍👍
Always thank you❣️❣️😊
Aamzing
Thank you so much!
👍
Thank you😊
素晴らしい!
フィギュアは…無い方が良いと思いました。 すみません
とんでもないです。
はい、私もそう思ってサムネから外しました😅😅
でも、いつか、フィギュアがあっ方がいいと言ってもらえるよう頑張ります。
ありがとうございます！
♡Perfection♡
Thank you❣️
jeez always struck by your work every time I see,does you selling a work by any chance,if so did I'd like to get your handcraft as oversea purchase😄
Thank you for your comment.
I make models in a small room, so even when the models are completed, I don't have a place to store them.
After being displayed at a model store, I sometimes sell them at auctions in Japan.
@@scalemodeler got it sir, if so please posted online page of market on top if you get a chance so I could able to see gallery before decision to buy
雑誌のライターを
していただきたい思いです✨
このコメントを永久保存させてください！
Great work! What’s diameter of the wire and connector?
Thank you !
Wire diameter and connector diameter are 0.6mm.
will your new one be out this week ?
Sorry ,I am late a little
I spent much time for editing movie.
Please wait for next week .
Model is complete now.
@@scalemodeler i guess we will see it then
GOOD modeling d(￣ ￣)
Thank you❣️