AOSHIMA 1/12 HONDA CB750 K0
Vložit
- čas přidán 4. 06. 2024
- AOSHIMA 1/12 HONDA CB750 K0
#motorcyclemodel #aoshimacb750 #cb750k0
Index
0:00 Prologue
01:55 Wheels, Chains, Brakes
09:38 Engine
14:50 Carburetor
22:00 Case Cover
23:03 Frame
26:03 Coil, Horn, Key-switch
28:31 Battery, Electrical equipment
30:28 Add spring
32:22 Exhaust
34:40 Front fender
35:48 Front suspension
37:30 Handlebar, Rear view mirror
38:49 Fuel tank, Side cover, Seat
41:13 Display Base
46:43 Complete Photo
Aoshima 1/12 Honda CB750 K0
As we enter a new year, I would like to aim to improve my production level this year compared to last year.
Honda CB750 K0 is a new product from Aoshima.
Focusing on introducing the kit, I added some finer details and assembled it.
I hope this video will be helpful for your model making.
About this kit
It has the same kit configuration as Aoshima's Honda CB400.
The cooling fins and wheels, which can be assembled one by one, are also made into separate parts so that the spokes intersect.
The rear suspension coil is thin but made of metal.
The tank and side covers are a metallic color with a painted texture.
The accuracy is very high and I think it reaches the limit of 1/12 scale.
Honestly, the chain detail is the worst.
Detail up parts
I don't think this kit requires much, but the detail improvement parts I really want are the chain and spokes.
production
This is a very precise kit, so we added as much detail as possible to make it even more precise.
Wheel
This time I tried changing the spokes one by one.
The spokes in the kit can be assembled so that they intersect, but when I measured the thickness of the spokes, they were too thick at 0.8mm.
By the way, the spoke thickness of Fujimi's Super Cub was 0.6mm.
Materials used
0.3mm stainless steel spring wire
0.32mm wire sheath
engine
I replace all cable connections with metal.
The link rod of the carburetor's choke lever was thick, so I replaced it with a brass wire and aluminum pipe, added bolts to the flange, and changed the carburetor's fuel line to an aluminum pipe for strength.
Hose
I used 1mm mesh cord for the oil line.
The rest are 0.6mm and 0.45mm wires.
Flame
I used a 0.5mm plastic rod to express the welding marks and replaced all the bolts.
Electrical equipment
Added wiring to the coil, horn, ignition key, battery, and brake switch.
Painting
I removed all the plating with bleach, but the first clear layer was so thick that it erased the mold, so I also thoroughly removed the clear layer.
The clear layer was removed with lacquer thinner.
The tank is the specified color candy blue green.
The instructions say that it is a mixture of bamboo color and metallic blue, but if you mix metallic blue and metallic green in a ratio of 6:4, you will get candy blue green.
The first layer is silver → metallic blue green → decal application → clear coat after complete drying.
Engine
Cylinder and crankcase are silver → metallic grille → ground brown → chrome silver
The other covers were painted with plated silver.
Since it is a precision mold, no surfacer is used.
Assembly
There are many places where I don't have enough adhesive area, so I used insect pins to secure those places.
It is also a kit that becomes difficult to assemble as more details are added.
However, even with straight assembly, you can enjoy the realism of the real thing just by applying the paint properly, so this kit is recommended for those who like motorcycle models.
Thank you all of you! - Jak na to + styl
![Building Aoshima 1/12 HONDA CB750 FOUR Scale Model Custom [Full Build]](http://i.ytimg.com/vi/GME9N-9qkzE/mqdefault.jpg)
![【バンダイ】SMP [SHOKUGAN MODELING PROJECT] 超電導 カンタム・ロボ 美化されてないカンタム・ロボっていいね #クレヨンしんちゃん #smp #スーパーミニプラ](http://i.ytimg.com/vi/n-zezEoIHXc/mqdefault.jpg)
French guy here.
I used to be a professional miniature maker in architecture for 32 years, and a motorcyclist for more than 40 years.
You have, Sir, all my respect. Your work is mind blowing.
I am very honored.
Your comments will be a precious treasure to me.
thank you!
Je suis très honoré.
Vos commentaires seront pour moi un trésor précieux.
merci!
凄い❗️と同時に驚くほど素晴らしい腕前（製作技術）ですね。
特にスポークを別途で再現するあたりには感心させられました。
本物がそのまま小さくなっただけの様な、本当に素晴らしい出来栄えです👍
コメントありがとうございます。
このキットのスポークはそのままでも見応えありますよって言うメーカーの姿勢なんですけど、0.2mm程太いんです。
メーカーの配慮が個人でのスポーク交換を難しくしているっていうキットでした。
もう一台ありますので、次はもっと簡単にスポーク交換出来る方法を模索してみます。
ありがとうございます！
You went Japanese Old School on those rims. Watching your technique with the grooves helped me understand why Gunze kit wheels (from the '80s) are designed like that. It's the same technique but they do all the hard stuff.😄
You have experience in making highly difficult Gunze kits.
That's a very nice thing.
It is difficult to replace the spokes with this Aoshima kit.
It is designed so that you can complete it beautifully without having to replace the spokes.
I respect your high skills.
Thank you for your comment!
Apart from the obviously brilliant "spoke-job", the back brake linkage is a work of art!!
Thank you.
We will continue to make videos that you can enjoy.
Your comments are very encouraging.
올려주신 영상을 모두 보고있는 서울에 사는 한국인팬입니다. 디테일의 표현이 대단합니다! 매번 생각하지도 못한 표현력에 감탄하며 많이 배우고 있습니다. 항상 좋은 영상 업로드해주셔서 감사합니다.
기뻐요!
저는 한국에는 서울에 2번, 부산에 2번, 여행을 갔습니다.
부산의 음식은 맛있고 2kg이나 뚱뚱했다.
한국인과 친구가 되어 매우 기쁩니다.
그리고 한국의 아티스트, 일러스트레이터, 모형도 포함해 매우 존경하고 있습니다.
가수는 김수연씨를 좋아합니다.
그녀에게는 일본에서 공연을 해 주었으면 합니다!
Your work is astounding and yet you manage to make it look so simple, the sign of a true craftsman. Thank you for sharing your work.
Thank you for your comment!
Since this kit is a new product from Aoshima, we made a video to make it easier to understand.
So your comment makes me very happy!
スタンドのスプリングはガンプラ用の動力パイプとして売られているスプリング使うと楽ですよ。
早速、検索しました。とても参考になります！ありがとうございます。
Another masterpiece, such an inspiration.
(and never be sorry for dirty fingers! That's a badge of honor for us model builders 😃)
Thank you for your kind comment!
I'm very happy.
But I'll clean my fingers a little more.😅😊
100% jako živá nemá chybu skvěla práce 👏👌🫶
Děkuji!
Moc mě těší a překvapují komentáře z Česka.
Od nynějška přidáváme souhrnnou rubriku v češtině!
Another amazing build. I look forward to every one, thank you.
Thank you very much!
I really appreciate your comment.
truly, thank you very much!
Astounding work.. the wing nut on the airbox was unreal !!! Brilliant work Sir
Thank you for your comment.
I regret that I should have made the butterfly bolt smaller.
Thank you for your advice!
絵心必須に加え、これに乗れないのが唯一の問題点。妄想を膨らますには十二分すぎる出来栄えだ。
キラリとしたコメント、とても光栄で嬉しいです！
ありがとうございます！！
最後まで見ました。「エンジンかけて」と言いたくなる完成度です。
最後まで見ていただいてありがとうございます😊
WOW!!!!!! Incredible attention to detail on your latest build, a joy to behold. 😎👍.
thank you.
Your comments are very encouraging.
We will continue to produce products with as much attention to detail as possible.
Aguardo ansiosamente pelos seus vídeos,seu trabalho, como sempre,muito detalhado, parabéns ❤
Obrigado pelo seu comentário.
E fico muito feliz que você tenha gostado dos meus vídeos.
Continuaremos a fazer vídeos que você irá gostar.
obrigado.
見たか！ディアゴ！
キャブレターとホイールの究極ディテールアップが圧巻。ベテランモデラーのプライドが粉砕され、やる気無くしました。
こんにちは！
最近の模型の進化に驚かされたキットでした。
CB750は思い出のあるオートバイなので、何時も雑な人間なんですが、性格を押し殺しながら作りました。
コメントありがとうございます。
とても嬉しいです！
毎回スゴイですね、バイク完成で一度止めました。お腹いっぱいです。再現度がハンパない。アップは実車に見えます。真似したいですが、ここまで出来ません。オーバーホールして組立てているような錯覚にになります。私、高校の時、CB400Fに乗っていました。K0は先輩の愛車で、懐かしいです🎉
なるべく、下手な所をお見せしたいのでアップ動画とアップ写真を入れて、反面教師的にしてもらおうと思っています。
ここがダメだなって思っていただけると成功です。
私は友人のCB750のKいくつかわかりませんが、借りて乗った事があります。
環七と中央高速を甲府あたりまで走って、スピードより運転のし易さに凄いと思い、今も忘れていません。
CB400は今でも憧れのバイクです。あの当時の市販カフェレーサーですよね！
@@scalemodeler 私は中免で408ccに乗ってました。違反です。750は足が付きません。そう、アップで見ると尚、よく見えます。もしかして、プロですか？
@@takes4372いえいえ、ただのサラリーマンです😊
Wow fantastic detail , very impressive work and video . I also enjoyed reading the closed captioning in english , thanks for posting the video
Thank you for your comment!
Although I'm not good at foreign languages, I enjoy communicating with people from other countries.
Also, please watch my video when you have time!
thank you!
tell me something by building such gr8 model kits of moor bikes , has it ever helped uin rectifying the mechanical problems faced in a real motor bike in real life by building such great motorbike kits
すげぇ…
今にも走り出しそうな佇まい。
オイルとガソリン、メタルの灼ける匂いが画面越しに伝わって来そうです。
こんにちは！
嬉しいコメントありがとうございます！
これを励みにして、より一層邁邁進いたします！
また、お時間ありましたらお越しください！
Beautiful build and great job on the base. 👍👍
Thank you very much ❣️❣️
@@scalemodeler 🤜🤛 😉
very nice. i had the real 1973 cb750 back in the 80s
Your motorcycle is the most popular motorcycle in Japan.
I have ridden it once, and it is a very stable motorcycle with few breakdowns, and it has become the basis for various customizations.
Congratulations on spending time with your amazing motorcycle!
プラモデルって！センスなんですよねー！
私のセンスなど無いに等しいですが、その通りだと思います。
でも、それが一番難しいですね！
コメントありがとうございます！
you so great! I've never expect of this common assemble product turn into a glittering art piece via person hands, plastic modle is just regular thing if there's no creativeness
코멘트 감사합니다.
한국의 코멘트는 매우 기쁩니다.
당신의 말에 감사하면서 조금씩 레벨을 올려갑니다.
정말 고마워요!
Thank you for your comment.
I am very pleased with Korea's comments.
As I appreciate your words, I level up little by little.
Thank you very much!
Outstanding, thank you!
You’re welcome, thank you for watching my video !
Crazy job, one more time, crazy man, no excuse me, you're an artist
Thank you very much for your wonderful comment.
I love your comment!
a fine looking model!
Thank you very much!!
素晴らしい技術ですが、ブリーザーパイプ、プラグコード、キャブレタードレンホースを黒のヤレた感で仕上げてほしかった…
最高でした！
そうですね！
1番汚れるコードですよね！
ヤレ感の統一、今後の注意点にします。
アドバイス、ありがとうございます！
Very nice model. Would be nice to do a custom bike with the kit. Like a cafe bike. 👍
I think so too.
The CB750 is the perfect base model for a cafe racer.
I will be building a cafe racer CB750 soon. Thank you for your comment.
Excellent job! I like a lot your weathering technique!
Thank you so much!!!
Cuánto cuetal amoto
皇宮警察のCB750サイドカーの雨天時エンストを直した事がありました。
エンストの原因はキャブレターのオーバーフローチューブに水滴が付いて、側車の影響で水滴が風で飛ばされず燃料が流れなくてエンストしました。ホースの先端を斜めにカットしたら直りました。
パレードでは低速で走るので、オイルクーラーと電動ファンも装備していました。
それにしても素晴らしい作品ですね。超凄いわ❗
コメントありがとうございます！
その逸話は素晴らしいです。
このお話しを聞けただけでもこの模型を作って良かったです。
お話し、ありがとうございます！
I love the Music.
Wow! Thank you sir !!
Espectacular 👌🏻👌🏻👌🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
¡gracias!
😂 happy new year my japanese friend🍾🥂🌠 🎉 toujours de belle réalisation vos motos 👍mille bravos 😊
Happy new year!
Vos commentaires sont toujours très encourageants.
Je prie pour que cette année soit une bonne année pleine de santé et de bonheur.
De votre ami japonais !
Outstanding ✌️👌
Thank you❣️❣️
Amazing!
Thank you!!
elle et superbe très beau travail 👍
merci.
Nous continuerons à réaliser des vidéos dont vous pourrez profiter !
Nice built as alwasys 🙂
Maybe a small detail inspiration: In the 80s we used wing nuts as lock nuts on the chain tensioner on the rear axle. Not everyone had that ;-)
Thank you for viewing this far.
When I saw Norton's bike, they used butterfly bolts, so I tried to imitate it.
European and American motorcycles use many attractive parts.
それストレートではない。
ぱっと見、ストレート？
Amazing
Thank you!
Wygląda jak prawdziwa tyko siąść i jechać przed siebie
Dziękuję, jestem bardzo szczęśliwy
The stand alone is a beauty 😍
👍👍🤙
Thank you 😊😊😊😭
@scalemodeler
Thanks for sharing your talent.
Please keep it up and the videos- you are very inspiring and calming to the soul.
☯️🧘♂️☮️
Well done sir.
Thank you sir 😊
Professional
Thank you!
Hello, very nice job 🤠
Hello, thank you❣️😊
Amazing works again ❤
So how long takes this model start to finish?
It's about 2 weeks.
In Japan, there is a long holiday during the year-end and New Year holidays, so I took advantage of that.
Always thank!
Omg just 2 weeks
You're amazing 👏 @@scalemodeler
this is too much 👏👏👍
Thank you❣️❣️❣️😊
👍
🙏😊
Honda Shadow Aero 750, 2008 🙏🏼🏍
Whaw ,jolie...❤
Angelina Jolie?
@@scalemodeler Honda jolie...
@@scalemodeler Je suis Français, désolé de ne pas parler votre langue, peut être n'avez vous pas compris ,mais votre travail est très propre ... 😁
👌😘👏👏👏👏👏👏
Thank you❣️😊
👍👍👍👏👏👏
Thank you😊😊😊
Olé 💃
gracias
チェーンは本当に最新キットなのかってくらいディテールがダルいんですよね。最初見た時成形不良なのかと思いました。
そうなんです。
チェーンのディテールを再現するのは難しいんでしょうが、せめて、側面だけでもなんとかならないのかと思います。
which one is better tamiya, revells or aoshima
Tamiya is best!
Thank you .
did i miss something , you didn,t respoke the wheels
👍👍👌👌
Always thank you😊😊😊❣️
すごい根気とテクニックですね！キットも素晴らしい！
ディアゴは１６万円もするのに、そこらの数千円のバイクプラモと変わらないシリンダーブロック冷却フィンの手抜き再現にがっかりして、完全に買う気がなくなりました。笑
1/4スケールなので、1/12の3倍の大きさですよね！
その値段とスケールでしたらせめてエンジン内部を再現して、エンジンが分解出来るようにして欲しいですね！
コメントありがとうございます！
any harleys in the near future?
Yes, I have 1/9WLA . I will change this model to bobber style.
Thank you!
i will keep watching for it.@@scalemodeler
did you not do a wla. how will this one be different?
I’m sorry 🙏
I'm currently gathering materials to change WLA to Bobber.
Once you have a completed image, you can start making it.
i,ll keep watching.
how will this one be different?. i like the other one.
返信ありがとうございます!(´▽｀)
参考にさせて頂きます😊
何度も何度も挑戦して頑張ってみます
生意気なんてとんでもない(;_;)
それだけのスキルがあればもっと威張って良いと思いますよ😊
ありがとうございます😊
i thought you already did an wla
Currently in production by Ducati.
I am making it together with the figure.
I'm currently working on a scene where I travel by motorcycle.
WLA will be made later.
soon?
how many hours to build this bike
I make this kit About 3weeks.
Thank you❣️
thats a long time. what will be the next project?
no figurines?
Yes, there is no figure this time.
The next motorcycle will also make figures.
Thank you for your comment!
フレームとか?自分デ！作るのですか。？
はい、古いキットはそうです。
でも、CZcams ではなるべく簡単にを大切にしてます。
ありがとうございます！
ここまできたら!もう、会社！たちあげれる。😊プラモデル博物館を!作った方が好きー。？❤🎉。
ありがとうございます！
世界を見渡すと、ビックリするくらいのモデラーさんが沢山います。
そんな方々に少しでも追いつきたいと思います😊
what is next
Next is Ducati 900ss.
With Motorcycle traveler.
ok
that should be an interesting build
traveler?? sidecar?
@@user-wf6es1gx8jItalian traveler.
Next Tuesday CZcams on😄
アオシマねぇ｡組みにくいモデルは徹底して組みにくいからなぁ｡バリが多いモデルも未だに売っているし｡ベタだが田宮がやはり組みやすくて安心｡
そうですね〜。
100%アナログのプラモを普及させるには余計な作業や技術を極力無くすことですね。
田宮が世に出してくれないモデルを出しくれるメーカーさんはありがたいです。
thin honda looks complicated
Thank you❣️❣️😊
本物?超える事あったんだ。😮◯モノ？一切の！ダキョウを！許してくれないって事は!もう、職人技。🎉。
ありがとうございます！
このコメントに傲ることなく、地道に邁進します！
嬉しいコメント、ありがとうございました😭
凄い( >﹏< *)なんでそんな事出来るの？
ありがとうございます😊
えっと、同じ事何度もやる…
あっ、生意気ですいません😅
no figurines
Базаров нет, реалистично смотрится!🤩👍🤝✊
Спасибо большое, я доволен!