PAGKAKAIBA nang Boxstock prostock & speedtech (open description for rules & regulation PH)
Vložit
- čas přidán 24. 08. 2024
- =4wd tamiya rules and regulation PH=
BOX-STOCK RULES
• your entry must be a complete build of a single mini 4wd kit only, you can not mix and match any part with other kits,
• only tamiya stock motors are allowed.
•starter kits are not allowed to be used under any circumstances.
•kits must be built as per instructions.
•ploy carbonate (clear) cowls can be painted. other cowls do not need to be painted.
•stickers must be applied.
•racer name must be applied.
•tune up parts or upgrade parts can not be used.
•unless otherwise stated, only alkaline batteries can be used.
PRO-STOCK RULES
• Open to all Tamiya M4WD units, all chassis types except RC Mini 4WD.
• Tamiya Motors Only.
• M4WD Pro (double-shaft) motors cannot be used for single-shaft motor-driven units and vice versa.
• Max of 6 Plastic Rollers (Up to 16mm).
• 1 Double Plastic Roller is Allowed.
• Mix Gear is not Allowed.
• 3.7:1 Gear is not Allowed.
• Trim, Sanded, or intentionally reduced in size is not Allowed.
• Ball Bearing is not Allowed.
• Washer can be used as spacers between the Bushing and Rims.
• S1 / S2 Wing Allowed.
• 1 Skid Bar/Plate for (AR, Fm-A, MA) allowed.
• Stabilizer Can’t Be Used as Roller.
• Any R6 / AA / UM3 /Ni-MH / Ni- Cd 1.2 Volts Battery
• 4 Wheels Drive only with 8 teeth propeller shaft
• Dampers are Prohibited to use.
• Racers have the preference to use either orange or pink drive gears (Crown Gears).Mixing (Using pink for front, orange rear, or vise versa) is not allowed.
• No modification of chassis
• Cars pushed during the start is out.
• Re-race is allowed if hit by another car.
• Re-race is allowed only once if all cars jump out
SPEEDTECH RACE RULES (SRP)
• Open to all Tamiya M4WD units, all chassis types except RC Mini 4WD.
• Tamiya Motors Only.
• M4WD Pro (double-shaft) motors cannot be used for single-shaft motor-driven units and vice versa.
• Tamiya Type Motor Unopen and Untempered
Torque - Tuned/Pro Motor
Atomic - Tuned/ Pro Motor
Rev- Tuned/Pro Motor
Light-Dash/Pro Motor
Hyper-Dash/Pro Motor
Mach- Dash/Pro Motor
Hyper Dash 2 Motor
Hyper Dash 3 Motor
Power Dash Motor
Sprint Dash Motor
• Any RG/AA/UM3 Batteries Are Permitted.
• NiCD/NiMH 1-2
• Minimum Of 4 Rollers ; Maximum Of 6 Rollers
• All Rollers Must Be Rotating And Not Fixed
• Double Rollers Count As 1 Installation
• No Mixing Of Gear
• 4 Wheels Drive Only With 8 Teeth Propeller Shaft
• Overall Car Height : Under 70 Mm
• Maximum Car Width : Under 105 Mm
• Overall Car Length Under 165 Mm
• Minimum Ground Clearance : At Least 1mm
• M4WD Pro (double-shaft) motors cannot be used for single-shaft motor-driven units and vice versa.
• Cars pushed during the start is out.
• Re-race is allowed if hit by another car.
• Re-race is allowed only once if all cars jump out..
• Racers have the preference to use either orange or pink drive gears (Crown Gears).Mixing (Using pink for front, orange rear, or vise versa) is not allowed.
• Number of laps
- 3 Laps for the first heat until the quarter-finals
- 6 laps in the semi-finals
- 9 laps in the finals
Salamat sir! Very informative. I'm new to the hobby. Excited to by one 😊. More videos about mini 4wd sir!
godbles sir
Thank you boss, mag start pa lang ako hobby. Kuhang kuha sa video yung mga gusto ko malaman.
its a good hobby sir and napakasayang maglalaro. hehehe
@@vibbonnie sir ask lang may list ka ba ng mga basic tools na need para sa pagbuild ng kit for Boxstock and bmax sana
im waitng for thes video i need learn more about tamiya
Tnk u for watching
Solid vid bro. Nakuha mo yung mga gusto kong malaman at makita. Good job
welcome po maraming salamat po sa pag subaybay god bles po happy racing
the best na paliwanag madali maintindihan
tnx po good bless happy racing
salamat lodi
Welcome po
Nood ulit ako nakalimutan ko na nung bata ako nag bibuild ako ng ganto haha
Hehehehe dami nag lalaro nyan po ulet.
tanda ko way back year 2000 kahit anu pwede ilagay sa kotse mo pero bawal magbawas sa chassis at galawin ung motor..di ko rin matandaan pero before pwede lumagpas sa 6 ung rollers..malaki na pala pinagbago ng racing rules ngaun..
Dami na po pinag bago
@@vibbonnie allowed pa ba gumamit ng replica o home made parts? may mga parts kc ako ng auldey na nakatabi..mostly stabilizers at rollers na ginamit ko before..
Dude cool track. Coming from America
tnx you for watching sir. theirs a mini 4wd in Australia?
wow lot of tamiya
nce vlog helps me a lot
Sir thanks sa vid na to... New subscriber mo po ako
salamat sa pag subaybay
make more video about tamiya bro
now i know tnx for the video
Salamat sa info Sir
welcome po. happy racing goodbles
Mas mabilis pa yung box stock sa pro stock 17minutes lang yung box stock 18 minutes yung pro stock😅 share kulang boss. Napansin ko kase
yeas po sir naka break in po ung bosstock kc tapos naka maboshe ung motor
Salamat po!
Salamat den po dont 4get to share po
Boss vib baka pwde patingin ng pang karera mong motor sa prostock
Lighdash gamit nko
boss, bakit mas mabilis yung box stock sa pro stock? at natanggal yata gulong ng box stock pag test mo.
ung box stock ko bos is naka breakin po yan kya midyo mabilis po tapos ung pro stock is nka tune motor lng yan, kya kunti lng diperensya nang takbo nila
Hello, Bagohan po ako sa Tamiya hobby. Any tips po or suggestions for Box stock races?
Yeas po pag mag boxstack ka po piliin mo po ung mababa na mga cowling downtrst. Tapos sa prostack po is kadalasan mga SFM gamit BG po na unit. Tapos sa speed tech po is kadalasan gamit is CFM na mga chasis tapos naka lantern po
Salamat po sa pag subaybay sa chanil ko po. Miron po ako coming upload step by step sa speed tech. Abangan po salamat godbles
@@vibbonnie a-abangan ko yan lods😁. Pwedi Pagawa din ng video about Box stock tournament para beginners kagaya ko. Sigurado ako marami ang naghihintay or gusto ng content na to nahihiya lang mag approach lods. God bless as always
@@vibbonnie good pm sir ano po ung toyota gazoo mo yan ba ung super hard ang tires?
Make video idol Kong ilang laps ba. Pwede sa boxstock salamat
Yeas po sa susunod
Sa box stock kahit bumper sa unahan isa lng d pwedi?
Hinde po kong ano lamg po tapaga nasa box pag bili mo
nice video
Thanks
boss san mo binili ung brocken giant
Sa tatay tamiya po. Or para naka pili ka sa shoy po sir
boss tanong lang. d pde yung black na double plastic rollers sa harap? tamiya 15529
Poide sa prostak po. Pag sa boxstak bawal
poyde po ba ang washer sa wheel ang tire at sa gear sa prostock?
Bawal po
Yun may speed tech category 😅
hehehehe
Kadalasan boss ano po mandalas may race tournament pro stock or speed tecq
sabay sabay po yan sila speed tech pro stock and box stock po
Pwde po ba sa speedtech kahit d orig ung parts or dapat orig ung mga parts like rollers frp damper dami kac aku nakikita sa shopee na mga roller frp saka damper na d orig
Poide po
boss pwede po ba palitan yung motor sa sfm prostock category? if pwede, anong motor po yung magandang
ipalit?
yeas po poide.. depende po ano gusto mo na speed. and layouts nang RT. poide light dash or hyper
may link ho nun lap timer? dko ksi mahanap sa google play
LAPTIMER lng po naka lagay sory po dko ma pasa link nasa iphone kc.
Tanong ko lng sir saang category pasok ang mga starter pack kits?
Sa boxstak po
Boss san ba nakakabili ng ganyan? Yan din ba yung mga tig 100+?
tamiya po brand yan bos nasa shapy po, of sa fb taytay tamiya name sa stor. gusto mo mga scandhand ky lolo jun/Renato Jr Sanchez
@@vibbonnie baka pwede mahingi link sa shopee boss
bmax nmn po sir salamat🙏
soon po sir hehehe.. goodbles po
Pwede ba gumamit sa pro stock race ng ultra dash and plasma dash na motor?
hinde po malakas na po yan mga motor na yan tatalon po yan
Bro san ba ulit pwede maka bili nyan .nung araw dami ko ganyan
sa shpy bos dami jan. salamat po sa panonood
Sir nanuod ako bakit mas mabilis box stock kesa prostock sir
sa makina po yan. nka break in po yan box stock ko tapos ung prosstock ko is sira na makina po nyan.
salamat po sa panonood.
Hi. Tanong ko lang kung prostock box stock speedtech khit ano chassis pwd? Or may specif chassis per category
Kahit ano po oky lng
@@vibbonnie bmax naman boss
what if yung sa box stock kumuha ng pyesa sa isang box stock like kumuha ka ng makina sa isang box stock nilipat mu sa isang box stock pro stock naba twag dito??
hinde po eba po motor nang pro stock
ung sa box stock poide mo e lipat basta ung standard lng ung kulay puti ang cover nanag motor
eto po motor nang pro stock
MOTOR
List of motors that can be used
Type 130 motor (from the box)
Torque-Tuned
Torque-Tuned 2
Atomic-Tuned
Atomic-Tuned 2
Rev-Tuned
Rev-Tuned 2
Hyper-Dash2
Hyper-Dash 3
Hyper-dash 3 (Japan and TMAC models)
Light-Dash
Power-Dash
Sprint-Dash
Torque-Tuned PRO
Torque-Tuned 2 PRO
Atomic Tuned PRO
Atomic Tuned 2 PRO
Rev-Tuned 2 PRO
Light Dash PRO
Hyper Dash PRO
Mach-Dash PRO
@@vibbonnie ibig sbhn pag box stock na motor inside. So pwd ang motor na tune up hinde tinanggal
Talp ng box stock ang pro stock boss
yeap
Tanong lng po any chassis po ba sa prostock anu 16 mm plastic roller pwede dn po ba thank po
yeas po any chassis po
Chassis with support or additional reinforcement are not allowed
Chassis that are damage or repaired are not allowed.
Lightening of chassis, drilling and cutting edges is not allowed.
Underlying screw beneath the chassis are prohibited.
Rear bumper (tail) can be mixed with other chassis. Modification and cutting any part of the chassis to fit the rear tail is not allowed.
Kits that do not have the front or rear skid bars on the manual cannot be installed on the machine.
Installations of plates, mass dampers, poles and upgrade parts are not allowed.
Bending and Down Thrusting of front bumper, rear bumper and wing are prohibited.
Only plastic rollers and plastic bearing can be installed on the chassis.
ROLLERS
Rollers may not be modified. Colored and painted rollers are not allowed.
A maximum of 6 rollers are allowed.
Side stay roller should be used us stabilizer only.
Plastic double roller size below 12.8mm are not permitted.
Removing of roller rubber are not allowed.
Rollers from tuned up parts are not allowed (ex. Three attachment point)
Only one set of Plastic double roller can be installed.
Low Friction plastic double rollers with rubber ring is allowed
Modification of rear screws and washers are not allowed such as sanding of screws or enlarging washer holes.
Ano required motor para sa pro stock?
Hyper dach motor po.
Salamat po sa oag subaybay godbles
Meron po ba superstock or same lang sa prostock ?
Same lang po stock lang po kong ano nasa box un lang
tanong lang ako sir pwedi paba yung double rollers sa front dun sa speedtech?
poide po ung DPR
Ano ma rerecomend mo sir as for beginners
SFM po na na mga unit,
lalo na sa speed tech, CFM gamitin mo po
Boss ang x chassis po san po xa magandang gamitin?
sir san ba maganda bumili ng tamiya mini 4wd dito sa cebu area po ako...ung legit po sir at matibay
bili ka sa shoppee Kay brickyard ka bumili ng tamiya
Sa shopy na lng po kc madami kanpag pilian at my mga parts ren po
Boss anung case ng speed mo thanks
case po saan bos?
Pano yung speed tech category ano requirements para dun 😊😅
basta d lng po open ang makina bos tapos kadalasan ginagamit na makina is ultra dash or mach dash po
Sa prostock po pede yung copy na dpr?
Poide po
@@vibbonnie e sa motor ng prostock pedeng tuned and dash motor?
San mo dinownload laptimer mo?
sa iphone po. sa aple stor
mga kasama ko myron nman den sa android phone po
@@vibbonnie ano name ng app bro pag sa android?
Pwede ba hindi lagyan ng sticker ang box stock
hinde po ma DQ ka po