【ミニ四駆】How To Break-In a Double Shaft Motor - Complete Tutorial
Vložit
- čas přidán 6. 12. 2023
- #ミニ四駆 #モーター慣らし #MachdashPro
Hi Guys, this is my Break-in tutorial for Dual shaft motors like Machdash Pro or Hyperdash Pro motor for your mini4wd car.
Visit the Mandai Circut CZcams channel "たったやべえCHANNEL"
/ @kagaman-mini4wd
46th Imajin Cup
• [ミニ四駆]第46回ゐまじんカップ
Other Break-In Procedure Video
• 【ミニ四駆】Japan Cup 2023 モ...
Salamat ulit sir
Nice tutorial
Thank you for sharing your ways on breaking in, seems like the Charsoon Antimatter is sold out and or discontinued is there other machine you can suggest?
How do you install a metal needle tip on WD-40?
Hi sir. Question po sa motor. Bawal po ba ultra dash sa bmax? Wala kasi akong nakikita na naka ultra dash na bmax
tutorial po on how to make from at for ms chassis. thanks
Sir, specific ba yang smart charger brand na yan na may “motor break-in” setting o kahit anong smart charger pwede? May smart charger kasi ako e.
anu po gamit niug chemical oil?
Hi sir I am wondering how to check the vibration of the motor
Just feel it with your hands while it running, it's easy to tell which one vibrates alot
Ano po kahandahan ng na break in na motor bukod sa bumilis?
Baka naman sir may full details ka ng setup mo nito? Thank you and Best Regards!
Yes sir, just tell me what setup or information you want to know. I will share it
Ishikawa po to kuya ah ! Fukui area po ako 😊
Wow, nice sir malapit lang
This method can Can it be used with a torque tuned motor?
It can, but don`t give much effect and good result
Good day po. Ask ko lang san nyo na bili ung Antimatter ninyo? Pano po pag walang ganun anong alternative.
Hi sir, try other brand like "Thunder" or "Reaktor"
Sir, pwede mo ba ako bigyan Ng tips, bago lng ako mag built bmax, Meron na akong Mach frame at geo glider, set up n lng kulang .
BREAK-IN naman po ng battery paano paabutin ng 1.52v fujitsu batts sa SKYRNC2200 charger po thanks in advance po
Ok sir, will upload soon🙂
sir mach dash pro is also good for bmax? or hypder dash lang pwede? hehe
MDP is good to use too, medyo malakas nga lang
Pwede ba sa lahat ng motor yan? Kasi yong tuned motors at stock motors wala yatang carbon brush? Gold thin brush lang yata at kung ganyan ang gagawin baka maputol na agad yong brush.
I only recommend this procedure fo dual shafts and hd3 and powerdash. Each motor has its unique procedure depends on class and category. Giving more effectiveness and performance.
Pano po break in kapag single shaft motor sir? Do you have a video po ba for that?
panu malalaman sir kung subrang ma vibrate ung MDP?
Hello . Recommended oil brekin sir?
Some oil released by Tamiya can be usefull and effective too. Try experimenting also what is available in your place.
@@minivictorydonkey Thanks sir. Good day
hello po yung haba pa ring ng build na ito ay 165mm pa rin?
Hi, yes sir. It still passes the required lenght and overall clearances.
anong gamit mong cleaner sir? pwede ba yung loctite? or mas ok kung wd40?
Hi sir, Any cleaner will do, don't worry what brand to use. Just don't overdo the cleaning, it may affect the internal quality of the motors
Same procedure po ba sa Light Dash Dual Shaft?
Hi sir, iba po procedure sa mga tuned type motor at light dash
WD40 for deep cleaning? OK lang ba etong method mo idol across all motor types? salamat. more power to you idol!
Thank you sir for comments
This methods is effective eith hd3 and powrdash, but its fails sometimes with sprints and tuned type motors
Applicable din ba sa LD?
Gusto ko po sana ulit mag start mag tamiya Kaso hindi ko alam kung Saan ulit ako mag umpisa haha
Start sir with fma chassis, since ito ang popular sa bmax. Hindi rin sya expensive
@@minivictorydonkey sorry sir boob question ulit. Yung gamit niyo sir Yung red Meron ba ganyan nabibili sa glorietta? Gusto ko po sana mag try ulit sana Kaso di ko alam Saan ako mag start haha
Sir anong name ng app yan gamit nyo for rph checker?
Giri: Rpm checker
Kuys. May alam po ba kayong alternative or ibang brand na may featute pang break in gaya ng charsoon antimatter mo? Hehe. Been trying to search charsoon antimatter but it's nowhere to find 😅 Thankyou po 😊 more power!
Thank you sir for asking.
May ibang brand na kagaya ng mismo ng AntiMatter, "Reaktor" at "Thunder" po name nila
@@minivictorydonkey ano po pwedeng alternative sir maliban po sa Thunder, reaktor at antimatter? Halos lahat sold out eh. 😅 hirap po makahanap haha
sir baguhan lang po pwede po ba makabili sa inyo ng motor yung naka tune na po???
Hi sir, not selling anything yet for now, sorry po😔
San k Japan sir new poh ako mini4wd 2 weeks plng
Toyama sir🙂
Hello sir, applicable po ba yung break-in method na ito sa single shaft motor?
I only recommend for HD3 and Powerdash
@@minivictorydonkeyfor single shaft brek in dinamo still same ?
sir ask lang . mas okay ba 3.7 kesa sa 3.5 at 4.1 sa bmax setup ?
Although I recommend 3.7:1 for bmax, of course you can change gear ratio depends on track layout
anu po gamit niung rpm app?
Giri sir, its free to dowload
Only 36k rpm??
Senpai, Dito din ako sa Japan and gusto ko din po mag build ng open class yung MS Chasis po. Thank you senpai. Saan din makakabili ng tools dito ako bandang nagoya po.
try to visit Fukushima Store or anything Mokei Store near you
Sagad n b un 34-35k rpm sa machdash
Hi,
Depende po, I usually measured from 2k to 5k rpm increase. In my personal xp, the best rpm with torque is from 34k to 38k. The higher the rpm the less torque.
magkano motor boss
Sorry sir, I dont sell break-in ready motor
Yung akin hanggang 20kph lang 😢
That is slow for HD3, try other motor with better rpm🙂
So u wasted all that money to find 3 good motors....sad
Yeah, here in Japan good motor can be sold 3000 to 4000 yen each
His money to spend not yours 😂
That's how you get the best motor to use