You are the best at explaining tiny details that other videos forget to mention and made me mess up trying to sew buttonhole :( After listening to your step by step video...now I can finally sew a bottonhole that looks really good! Thank you SO much "Mom Does Stuff"!! Cheers from Canada ♥
I tried using Singer instructions = fail. I've tried at least SEVEN other CZcams videos on this = fail!! This is a perfect video, in my opinion! It gives you the tiny details that actually make it work when no one else mentioned those details! THANK YOU, THANK YOU, THANK YOU!!!
This was a wonderful demonstration thank you, much more helpful than the official Singer one! Explaining what pushing the button level back did was extremely helpful to me ! 😊
Thank you thank you thank you!!!!! I've been sewing for over 30 years but this automatic buttonhole attachment is new to me. Singer's videos are not helpful at all. I am so grateful to you! This was driving me nuts.
Thank you! I always watch videos before i try stuff. I like that you said i just have to pull the foot apart - i was trying to find some sort of release lever to make the ratcheting easy (instead of scary). The other video I watched suggested putting straight pins along the ends of the hole to protect them from overzealous ripping. And i never knew that the brush had a seam ripper in it😂
I’ve been pulling my hair out trying to make a buttonhole with my singer. Managed a few times, failed most times. Many things you’ve helped me troubleshoot. Can’t wait to try again! Thank you!
Thank you, Thank you,THANK YOU!!! I have a project I'm working on that needed buttonholes, I have this machine 4432 and was looking at videos to see how to make them. None where as good as this one!!! I'm blown away, just practice make them and WOW!!!! The others never mention the details about pulling that PUSH level all the way down?? Mom you amazing, Thank you again.😁🙏🏼
You are so great, thank you for such a clear explanation! This is the fourth video I watched about button holes, and finally my first successful attempt :’)
Thanks so much for sharing this. I was intimidated to undertake the buttonholes for my project, and watching you was so much easier than reading a booklet.
Great video! The manual for my 4452 machine was not clear enough on the instructions for using the buttonhole foot. Thanks to your video I was able to set it up correctly and make the buttonholes! Thank you!
Thanks so much, I have been wanting to make a vest, and thought how would I make button holes, and you showed me how. I have the same machine, and 2 out of the 5 button holes came us shorter than the others, so I had to rip them out and redo them. Your video was a great help - thanks!
@@momdoesstuff Ok. It went up! It was a little tough... I wouldn't dare push the button too hard. But I did it 🎉. I have been sewing for 32 years up to now. I NEVER tried to do a button hole with my old machine! But with the Supera I really wanted to achieve it. Thank you very very much!❤❤❤
Lol my 4452 died after 18 button holes. All plastic gears and internal cams. Singer is just a former name of quality not today's cheap Chinese plastic junk. The machine is only 6 months old and singer said sorry, maybe a local repair center can fix it....there are none...sewing machine repair places don't want to touch them, they are not worth fixing and it's obvious they have abandoned today's junky name brand
Even Singers official video on the topic was missing all the settings and info, but Mom provides! Thank you
You are so welcome! I’m glad it was helpful!
You are the best at explaining tiny details that other videos forget to mention and made me mess up trying to sew buttonhole :( After listening to your step by step video...now I can finally sew a bottonhole that looks really good! Thank you SO much "Mom Does Stuff"!! Cheers from Canada ♥
Yay! Cheers to success! Thanks for watching!
I tried using Singer instructions = fail. I've tried at least SEVEN other CZcams videos on this = fail!! This is a perfect video, in my opinion! It gives you the tiny details that actually make it work when no one else mentioned those details! THANK YOU, THANK YOU, THANK YOU!!!
You are so welcome! I’m so glad it was helpful!
I can’t thank you enough! The manual does not explain the button hole lever at all! I could never figure out why it wasn’t working and you saved me!
Lol yay! I’m so glad it was helpful!
Same!!!! I just couldn't figure out where the lever was - I was getting so frustrated!!
Thank you. Your video is a great help.
You’re a wonderful teacher….thank you so much!! 👏👏👏
You’re so welcome! Thanks for watching!
Thank you! You assisted my fist ever buttonhole creation! I couldn't figure it out by myself, but you saved the day.
This was a wonderful demonstration thank you, much more helpful than the official Singer one! Explaining what pushing the button level back did was extremely helpful to me ! 😊
Yay! I’m so glad it was helpful!
Thank you thank you thank you!!!!! I've been sewing for over 30 years but this automatic buttonhole attachment is new to me. Singer's videos are not helpful at all. I am so grateful to you! This was driving me nuts.
Thank you! Your video quickly helped me find my mistake in not pulling the lever all the way down. And my buttonholes turned out perfect!
Awesome! It's a tricky little lever 🤨Thanks for watching!
So helpful! Thank you so much. Clear conscience instructions. I appreciate you so much!
Thank you, you make it simple and the video is clear, I can see what your doing. It's not far away or at the wrong angle. Excellent teacher.😊
This was super helpful, thanks!
THANK YOU!!! The official Singer tutorial tells you to engage the lever in the wrong position! You saved my project!
Yay! I'm so glad it was helpful!!!
Thanks so much for walking me through completely! ❤
This is the best video on a singer buttonhole. Thank you it helped me with making my buttonholes on both my machines.
Yay! I’m so glad it was helpful!
Thank you! I always watch videos before i try stuff. I like that you said i just have to pull the foot apart - i was trying to find some sort of release lever to make the ratcheting easy (instead of scary).
The other video I watched suggested putting straight pins along the ends of the hole to protect them from overzealous ripping.
And i never knew that the brush had a seam ripper in it😂
Me too😂
I’ve been pulling my hair out trying to make a buttonhole with my singer. Managed a few times, failed most times. Many things you’ve helped me troubleshoot. Can’t wait to try again! Thank you!
I'm so glad they were helpful! Thank you for watching!
Thank you, Thank you,THANK YOU!!! I have a project I'm working on that needed buttonholes, I have this machine 4432 and was looking at videos to see how to make them. None where as good as this one!!! I'm blown away, just practice make them and WOW!!!! The others never mention the details about pulling that PUSH level all the way down?? Mom you amazing, Thank you again.😁🙏🏼
You are so welcome! I’m really glad it helped you out! Thanks for watching 😊
You are so great, thank you for such a clear explanation! This is the fourth video I watched about button holes, and finally my first successful attempt :’)
Oh yay! Buttonholes still scare me 😂
Thanks so much for sharing this. I was intimidated to undertake the buttonholes for my project, and watching you was so much easier than reading a booklet.
Yay! I’m so glad it was helpful! Thanks for watching!💕
Thank you so much! I’ve watched so many videos and yours is the only one that clearly showed every step!
You are so welcome! I’m so glad it was helpful 😊 Thanks for watching!
I LOVE YOU! The instructions in the manual are waay to abstract and the videos in Singer skip half of the steps! Tysm🫂
You are so welcome! I’m glad the video was helpful!
It's funny how this video was more helpful than Singer's video! -Or maybe I didn't watch the right video-
Thank you!!!!
Thank you so very much. You are a great teacher.
Thank you for this demonstration, now it’s clear for me ❤️
Glad it was helpful!
Great video! The manual for my 4452 machine was not clear enough on the instructions for using the buttonhole foot. Thanks to your video I was able to set it up correctly and make the buttonholes! Thank you!
Yay! I'm so glad it was helpful!
Thank you so much for this clear explanation. I was so frustrated with all other videos.
You are so welcome. I’m glad it was helpful!
Thanks Mom. I always learn something new from your sewing videos. Love your singer heavy duty machine. Take care and stay safe 💞
Thank you so much, Odetta! I have a break next week and I'm hoping to get some project videos done!
@@momdoesstuff Sounds wonderful 💞. Enjoy
loving your videos. learning a lot of tricks from you. just got my 4423 last week...i heaven. subd.HT🤙🇺🇸
Thank you so much! I’m glad the videos are helpful!
Thanks so much, I have been wanting to make a vest, and thought how would I make button holes, and you showed me how. I have the same machine, and 2 out of the 5 button holes came us shorter than the others, so I had to rip them out and redo them. Your video was a great help - thanks!
You are so welcome! I’m glad it was helpful!
Thank you so much!!! I could not figure out how to get my button hole to work - this was fabulous and I know what I was doing wrong
Yay! I’m so glad it was helpful!
I feel the same way!! I am so grateful for this video! I had the darn thing on backwards LMAO!
Thank you for very perfect explanation! Just watch couple demo before and didn’t get it until your video! Thanks again!
You’re very welcome ! I’m glad it was helpful!
You made it so simple. thx
You’re so welcome! I’m glad it was helpful!
Nice, clear & detailed instructional - Thank you!
Amazing
You explain everything very beautifully
Ugh, thank you thank you thank you! 🥰🥰🥰
You’re so welcome!
Fantastic video! Thank you!!
She is a very good teacher for beginners especially
She does not miss any steps
Thank you so much!💕
Thank you so much! You are awesome teacher!
Thank you! I’m so glad it was helpful!
Bless you. Great demonstration.
I'm so glad it was helpful!
You saved me!
Thank you so much-better than the actual Singer buttonhole video. Much more detail.
Thank you! I'm so glad it was helpful!
Thank you soo much for the tutorials they are much appreciated.
Ty. I love your video! Appreciate the easy to follow instructions
Glad it was helpful! Thanks for watching!
Thank you so much for this! It was extremely helpful!
I'm so glad! Thanks for watching!
Very good easy to follow instructions. Great lesson.
Thank you so much!
Thank you so much. I am very happy. I know how to make buttonholes from your video. Awesome.
Yay! I’m so glad it was helpful🙂 Thanks for watching!
Great know
Edge about this thank you for sharing👍
You are so welcome! Thanks for watching!
😊 thank you so much, your video help me a lot.
Thanks Mom!!
You’re very welcome! Thanks for watching!
Thank you so much this was super helpful!!
I’m so glad! Thanks for watching!
Hi thanks for the video, but how do you make one of the buttonhole so full?
And the underside of minr looks better that the right side.
THANK YOU!!!❤❤❤
Great content!
Thank you!
Thank you for sharing!
You are so welcome! Thanks for watching!
What to do when your button is bigger than 3 cm?
Nice demo
Thank you!
OMG thanks this was really helpful
Yay! I’m so glad! Thanks for watching!
Your seam ripper can go into the brush half to give longer handle.
Well, this machine can create only small button holes. What if I would like to have 1.5 inch or longer button hole?
Great question! I just got off for summer break so I'll see if I can work up a video on this. Thanks!
Thanks
Any idea, why my fabric isn't moving?
That happened to me. You have to make sure the lever is all the way down and push it back until it clicks. Hope it helps.
Should the needle position be in the center, right or left? Thank you so much.
For buttonholes, the machine setting chooses the correct position for each part of the buttonhole.
@@momdoesstuff thank you for such clear instructions!
My mom's singer did button holes just fine without changing presser feet.
Oh, yes, you can do them without the foot, you just have to manage the sizing manually. Thanks for watching!
Thank you soooo much.👍🥰
You’re very welcome! Thanks for watching!
Thank you! The manual was not helping at all!
I saw a sugestionn where a needle or pin was put just before the end of the uncut stitching to ptevent the ripper from cutting too far.
How do you left the push lever up?
Oh my God. I ended up doing it! Eventually! Thanks to you 🎉. But how to remove the Push button Up?
Yay! You should be able to push it back up into place. You may have to wiggle it ever so slightly to make it go back up.
I mean when button hole is done. I can not move the push button upwards 😢
@@momdoesstuff Ok. It went up! It was a little tough... I wouldn't dare push the button too hard. But I did it 🎉. I have been sewing for 32 years up to now. I NEVER tried to do a button hole with my old machine! But with the Supera I really wanted to achieve it. Thank you very very much!❤❤❤
@@alinetassin326 Yay! I'm so glad you got it!
Thanks Mom
You are so welcome! Thanks for watching!
🎉
☺️
Thank you 😘
You’re welcome! Thanks for watching!
Sadly mine still makes a BIG ball in one spot :(
Oh, no :(! Check to be sure the feed dogs are engaged.
I need to know what is the bitten at the back what it for when you take off the cover what it’s for
I believe the one you’re referring to adjusts buttonholes. If one side is much looser than the other
Lol my 4452 died after 18 button holes. All plastic gears and internal cams. Singer is just a former name of quality not today's cheap Chinese plastic junk. The machine is only 6 months old and singer said sorry, maybe a local repair center can fix it....there are none...sewing machine repair places don't want to touch them, they are not worth fixing and it's obvious they have abandoned today's junky name brand