Avoid These Mistakes I Made with French Cleats
Vložit
- čas přidán 15. 06. 2022
- Over the many hours I have put into French Cleats, I have made many mistakes. Here are some of them, so hopefully you will not have to repeat them.
We believe French Cleats are one if the best ways to store many tools and hardware with easy access. We even like it better than having a large tool box.
Please share this video with any family or friends who could benefit.
MORE VIDEOS:
OVER 100 French Cleat Ideas PlayList:
• 20+ Simple French Clea...
Making French Cleats WITHOUT a Table Saw
• 5+ Ways to Make French...
15 Things to Avoid with French Cleats
• 15 Things to Avoid wit...
7 Locking French Cleat Ideas for your Tool Storage
• 7 Locking French Cleat...
Adding French Cleats to an Existing Shelf
• Adding French Cleats t...
Huge French Cleat FLAG
• French Cleat Tool Stor...
What is the BEST Spacing between French Cleats?
• What is the Best Spaci...
If you would like to help support our channel, please use our affiliate page on Amazon (paid link), were we have listed a bunch of items we suggest.
Just follow this link:
Amazon Product Suggestions:
www.amazon.com/shop/influence...
(There is NO extra cost to you.)
Your results may vary depending on type of materials, your craftsmanship, and tools at hand. We are not responsible for any damages or injuries that might occur. Use of video content for personal projects is at your own risk.
Some links in description are affiliate links that let you help support our channel at no extra cost to you.
Music from CZcams library.
#frenchcleatsystem #diy #toolstorage
Ephesians 2:10 - Jak na to + styl
Clinton, I've been using your videos as my bible for building my french cleat system, and it has been invaluable. But you have so many videos, I've found myself losing track of what ideas or techniques are where. this has resulted in me fast-scrolling through the same vids repeatedly. So I finally figured out that I should make a Table of Contents. I've only done a few of your videos, but I thought other guys could use it, and maybe even contribute more. So, hoping it is ok with you, I'd like to share what I got so far. Best wishes.
20+ Simple French Cleat Ideas for Your Tool Storage
1. Skilsaw
2. Dog-bone Wrench holder
3. Chisel holder
4. Orbital Sander
5. Paper towels
6. Glove box
7. Angle Grinder
8. Old time tool box
9. Corner Squares
10. Bar clamp
11. Woodworking Clamps, Stacked
12. Screw boxes
13. Spade Bits,
14. Mallets, hooks
15. Transparent PVC Pipe as storage
16. PVC small tool holder
17. Chunk of pegboard
18. Small simple with nails
19. Beer can holder
20. Tape measure
20 More French Cleat Ideas #9
1. Oscillating Multitool
2. Mobile perpendicular LED Light
3. Bench Cookie Cones
4. Pliers, larger
5. Big PVC Cubby Holes
6. Simple 2-drill Motors
7. Multi-purpose holder
8. Paper plate saw blades
9. Reciprocating Saw (Update)
10. Milk Crate scrap holder
11. T-Post driver
12. Misc Crates for Storage
13. Metal French Cleats
14. Turning Tools, Vertical. Update
15. Over the door Hangers
16. Contour Gage
17. Oil Filter Wrench
18. Save long triangle strips for bumpers, Stirring Sticks
19. Flush Holders
10 Awesome French Cleat Ideas
1. Round cla;mp holdere
2. Brushes
3. Clamps, Two-Level, Updated
4. Screw Box
5. Files, Compact
6. Shelf, V Shaped
7. Fan
8. Spotlights
9. Step Stool
10. Ceiling Installation of Fr. Clts
Avoid These Mistakes I Made with French Cleats
1. Don’t use pallets
2. Use screws, not nails, on cleaats
3. Follow consistent size on cleats
4. Shave the tip of the cleat surface
5. Tiny holders come off easily
6. Plywood is beter than wood for most things
7. Make extra slots in your holders
8. Try not to cover up lower cleats with higher ones
I’m getting ready to build my first cleats. This was exactly the video I needed. I definitely would have made some of the same mistakes!
Great tips! Best ones are consistent thickness i.e. 3/4” plywood, removing 1/8” or sanding the top sharp edge, and one of my favorites is building in a locking mechanism which works great for lighter/smaller cleats. 👍🏼
Thanks for the info. I'm wanting to use french cleats for wall cabinets that I will be building for my bathroom.
Almost ready to start this french cleat project.
Love the French Cleat series. Keep‘em coming. In the middle of building my new WoodShop and I will be installing French cleats on 3 walls and I love your ideas. 🙏🏼❤️✝️❤️🙏🏼
Did you build cleats yet? I just got cleats on my walls, no holders yet. I found pine 3/4 plywood at Home Depot. Lowes has hardwood at 90 a sheet, and exterior grade. The pine at Home Depot is nice grade, but around 60 a sheet. For screws I used HeadLok, 2&7/8 from Lowes. I used forstner bits on drill press to drill a countersink. One per stud is plenty strong. Looks cool too, with natural wood color and black, round screw head visible.
Thanks for sharing these tips. I got some pallets I was going to tare down and make french cleats to put inside on one my shed walls. you just saved me a lot of headaches. Thanks!
If you have bench planer you can get them equal. I will NEVER try to process pallet wood again without a jointer and planer. In fact, I now have both and probably won't mess with pallet wood anymore.
I love all your French cleat ideas. I am currently working on ideas for a French cleat wall for my closet.
Very nice
Clinton, thank you so much for your videos, I think I am doing our garage with way less mistakes! God bless.
Just started to build my first French cleat wall. enjoyed your video 👍🇬🇧
Nice. I always enjoy watching your videos. Thanks for these great tips.
absolutely helpful tips. thanks.
Short, Sweet and to the point! Love it!!!!!!!! Thank you!!
Yes, and life is too short so it’s important to learn from other’s mistakes and take tips along the way. 👍🏼
Thank you Scott
Good video thx for sharing enjoyed it Thx for the tips
Thanks. I was just about to set up my workshop with pallet wood cleats.
Good stuff, as usual. I've saved most of your French cleat videos and refer to them frequently. In making cleats the other day I made a painful discovery, though. While running cleats through the table saw to trim off the sharp edge, I was periodically getting tiny spears thrown painfully at my face and arms by the blade, which was raised a little above the sharp edge of the cleat. I discovered that if the edge of the cleat extends just a tiny bit past the blade as it is cutting, a sliver is cut off and goes whizzing off at high speed, sometimes along the table, sometimes at a faceward angle. I was wearing my PPE and standing to the side, but the spears were stinging my hand and arms and bouncing off my glasses. I had set the fence to cut off less than the blade width, but apparently a couple of the cut cleats were a little wider. Next time I will raise the blade higher so the teeth are cutting at a more downward angle and hope that solves the problem.
That definitely sounds painful. I hope your modification works well. Thank you for letting us know.
thank you
Good advice!
Agreed 💯👍🏼
Mistakes are necessary for us to learn from, and be inspired to be more creative.
Thanks. What's the ideal width (not thickness) of cleats (I see 2.5 a lot) and what should be the gap between two cleats?
The ideal width is 2.5” and for spacing I simply use a small scrap 2x4 so 3.5”. I hope this helps as I’ve installed a lot of French cleats. 👍🏼
The Gap is completely up to you, just keep it big enough so that you can take your holders on and off easily.
When it comes to the size of the wall cleats, that varies among people depending on the material they use. I like to use 1x4 pine boards which means the size will be between 3 and 3 1/2 inches. That way I can have two screws at each stud. But other people use different sizes.
@@SpecificLove7 Thanks. After doing some maths, I concur with your suggestion of 1x4 as it gives enough strength + optimum space on wall. Thanks a lot for great videos and suggestions!
Year old video hope your still checking comments. So I am about to begin a shop that uses primarily all reclaimed pallets and pallet wood including my workbench and my next project French cleats. My idea was to just get them all to the same thickness. I had many ideas from hand planing all the way up to making a router sled or just buying a thicknesser. If you could get all the pallet wood to the same thickness, do you think it would work then? Thanks for reading my message. Hopefully respond
As long as the pallet wood was good quality and in good shape, I would think it could be used as long as it was the same thickness. Just remember that the thickness of the wood is part of what gives it its strength.
♥️👍🏻😎🙏🏻
Can I use mdf?
I would not