Asphalt Medium Crack Repair
Vložit
- čas přidán 8. 09. 2024
- Link to similar product on Amazon:
linktw.in/jEFRpU
Proper maintenance of your driveway is crucial for ensuring its longevity and aesthetics. Asphalt crack fillers are effective tools for repairing and preventing cracks in driveways. This report aims to provide a step-by-step guide on how to use the "Seal Best" asphalt crack filler, a popular product known for its durability and ease of use. By following these instructions, you can enhance the appearance and lifespan of your driveway.
Things you may need:
"Seal Best" asphalt crack filler
Protective gloves
Safety goggles
Wire brush or broom
Leaf blower or compressed air
Asphalt crack cleaning tool (optional)
Putty knife or scraper
Portable propane torch or heat gun (optional)
Trowel or squeegee
Dry and sunny weather (for optimal drying)
Step-by-Step Instructions:
Preparation:
a. Start by wearing protective gloves and safety goggles to ensure your safety during the process.
b. Clean the cracks: Use a wire brush or broom to remove loose debris, dirt, and vegetation from the cracks. A leaf blower or compressed air can be used to blow away any remaining debris.
c. For deeper and more stubborn debris, you can use an asphalt crack cleaning tool or a stiff-bristled brush to ensure the cracks are thoroughly cleaned.
Crack Filling:
a. Open the "Seal Best" asphalt crack filler container and mix the contents if required, following the manufacturer's instructions.
b. Use a putty knife or scraper to scoop the crack filler and apply it directly into the cracks. Ensure the cracks are completely filled, slightly overfilling them to compensate for settling.
c. For smaller cracks, you may use a portable propane torch or heat gun to heat the crack filler slightly, making it easier to spread and adhere to the cracks. Exercise caution and follow safety guidelines when using heat sources.
Smoothing and Leveling:
a. Once the crack filler is applied, use a trowel or squeegee to smooth and level the surface, ensuring the crack filler is evenly distributed.
b. Pay attention to the edges of the cracks, making sure they blend smoothly with the surrounding asphalt.
Drying and Curing:
a. Allow the applied crack filler to dry and cure as per the manufacturer's instructions. The drying time may vary based on the product and environmental conditions.
b. It is essential to keep the freshly filled cracks free from traffic or any heavy objects during the drying process to ensure the best results.
Clean-up:
a. Clean your tools and equipment with water or the recommended cleaning agent immediately after use, as the crack filler can harden and become difficult to remove when dried.
Conclusion:
Using the "Seal Best" asphalt crack filler is a straightforward process that can effectively repair and prevent further damage to your driveway. By following the steps outlined in this guide, you can ensure a successful crack filling experience, enhancing the durability and aesthetics of your driveway. Regular maintenance, including crack filling, will help extend the lifespan of your asphalt surface, saving you time and money in the long run.
"As an Amazon associates member we may earn commissions on qualifying purchases"
I used a like product a month ago. It has setup just like the product you used. It sure beats having a whole driveway seal. I'm more concerned with freezing water come winter which will further cause heaving. Thanks for you video.
Did you pour gas along the crack prior to setting it on fire?
That was nice how you poured it right over the obvious roots you had not burned and that were still green and you hadn't bothered to clean out
There may have been a couple of pieces of grass that were still green but 4 months later the cracks are still filled and look great. Cheap solution that was easy to do yourself. Would be worth investing in a larger blow torch with a 20lb propane to be sure
Very nice indeed! I did the same thing to mine last year, using the same product from Menards. I kind of wonder if the product itself doesn't kill the roots or its just thick enough the root can't get through it and it just dies off.
Just thick enough .
Nice video.
looks satisfying...
It is. And the nice part is it dries in a couple days
I used a asfalt tape lasted ok so far, 2" by 50 foot roll
Interesting. I will have to look into it. This is still holding strong. 💪 tape may work. I may try it for the smaller ones
Last one season. Cracks are all back the next year.
How is the product holding up that you used now?
Still working well. A few edges have separated, but it’s still flexible. Might shoot a little more in the crack this summer. All in all it’s still holding up well. For the cost I would do again.
Still holding up well. For the cost I would do again.
Can you put driveway sealer on top it?
I used a similar product from Lowes. Absolute garbage, plan to redo it annually. If you're going to do the work, use hot rubber or nothing at all. Good luck, hope yours lasts longer than the garbage I got from Lowes. It was called Black Jack Speed Fill. JUNK, as was their atrocious customer service when I called them to ask about options/solutions.
Thanks for the heads up. This product hardened but still has some elasticity to it. I sprinkled black sand on top after first day and then drove on it. So far… so good. We shall see how it handles the winter.
@@TheHappyHootieHow is it now?
Well no response means it fell apart. Don’t worry so did mine when I did it.
@@dp6297 It looks hideous.
I agree . I have good winters. Hot tar best way😊