Haslab Proton Pack with Ninjatunes and Spongeface Wand Keep Alive
Vložit
- čas přidán 9. 09. 2023
- Does the Ninjatunes kit work with the Spongeface wand keep alive kit? For me it does, but modify at your own risk.
Here is a quick demonstration of my Haslab pack running with a Ninjatunes kit and the Spongeface wand keep alive kit. I've been running this combo for months and have tested it for hours on end while attending the Springfield Comic-Con for two days.
I have no affiliation with either NinjaTunes or Spongeface, I purchased both kits with my own money. I just make parts and test kits for parts I own and use.
Buy my version of the Proton Pack Attenuator
www.etsy.com/listing/15461284...
Visit my Etsy store.
www.etsy.com/shop/RightCoastC...
Spongeface wand keep alive.
www.ebay.com/itm/194783846582...
I wish that you had a walk-through on how you routed the switches from inside the Cyclotron to up & over your left shoulder on the pack. That's nice & slick option so you can easily toggle between the modes! I like it a lot!
The only thing I wish on top of it would be a kill switch to cut power on the pack. I too have a NinjaTunes Card, and every so often when running through the modes I have to kill the power in order to clear it fully out of a mode it's set to. I've disconnected my rumble in the pack as well, it's a weird noisey hum/nuisance more than anything else.
On the ninja tunes kit when on the afterlife mode in my hasbro pack. When the switchs on the wand are switched with a 1To 3 second between, the last switch is push up the pack go's in firing mode without press the button to fire also in you video there is no beeping sound before hitting the last switch, hope you can help , i didnt get a response for ninja tunes as of yet maybe you can a fellow ghostbuster 👻
Man I’m just learning about this pack and incredibly bummed I missed out on the pre-order. I hope they look at doing another version of the pack in the future.
Hot bro!!!
Can you do a video on how to hook up spongeface keepalive kit and ninja tunes kit to the Hasbro wand if you can it would be helpful, thank you 👻
You mentioned that flipping the third switch to turn on the rumble motor kills the keep alive. Is that just if you LEAVE the switch flipped for 30 seconds, or can you turn it on for say, 25 seconds, and then turn it back off to avert the shutdown?
Similar question for firing: you mentioned the overheat sequence shuts it down. But if you avoid the overheat, will it stay on, if you’re just firing for shorter bursts periodically?
If you leave the wand on with the rumble going, it will shut down after 30 seconds. I assume if you play the game and toggle the 3rd switch off after 20ish seconds you could fake the wand out from shutting down. If you don’t over heat the pack, it will stay running.
Does this kit need the keepalive kit and proton pack attenuator?
Not does not.
Maybe I’m late to the party, but I can’t find the Ninjatunes board anywhere. Was it discontinued? I’d really like to get one for my pack.
You will need to join the NinjaTunes Facebook group and sign up for the kits.
@@scoleri_brothers Thank you, sir!
whatd you use for the hose connecting to the thrower? that's a really good idea, i wanna try that
Ohh you noticed. It’s very simple. I’ll have to do a quick video on it.
@@scoleri_brothers Is it like one of those fabric/expandable garden hoses or something akin to that?
@@F0rtuneLT it is fabric covering.
@@scoleri_brothers you got a link for it?
@@F0rtuneLT here ya go. 1.25”
Nylon Protective Hose Sleeve Sheath Cable Cover Welding Tig Torch Hydraulic Hose, 1.25 Inch ID, 25 Feet Length, Black a.co/d/amonDg6
Can you show us how to take apart the wand to get the main electronics
I may be able to do that
@@scoleri_brothers These small screws are like very flimsy and crazy to take out
Spongeface has 3 wand keep alives... Will they all work with the Ninjatunes board?
I’m not sure on all, but the one I have works.
@@scoleri_brothers Thank you! Is the one you purchased the exact one in the ebay link you provided "Spengler link"? I purchased the "WandKeepAlive" version on ebay hopefully it works with ninjatunes when it arrives 🤞 Sub'd thanks again!
@@SquadCollector this is the one I bought.
www.ebay.com/itm/194783846582?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=CLzqyBGDSGS&sssrc=4429486&ssuid=P4CTZOAZRRK&var=&widget_ver=artemis&media=COPY
Order this kit now instead. I'll use the original one I bought till my ninjatunes board arrives. Thank you again so much! Wish I saw your video before I ordered hahaha.
Good luck
How much for the attenuator
There’s a link to Etsy in the description but here is the direct link.
www.etsy.com/listing/1546128420/
I was disappointed in this Hasbro pack and I was super excited for it before it came out. It's literally a toy. It's an oversized toy. It's 99.8% plastic. Cheap Hasbro toy plastic. I got rid of the one I had. Wasn't impressed with it at all. I'm going to purchase BOK's complete full proton pack kit and build my own. I'm not knocking you bro. That's awesome that you love your pack. I'm just saying for me, in my opinion there's way better options out there.
I mean you’re comparing apples to oranges. For the price, the hasbro is a great back and very realistic, especially with some painting, weathering and minor upgrades. The barrier to entry makes it easy for anyone to cosplay. I mean don’t get me wrong, I like my custom fiberglass pack too but it’s not as forgiving as the haslab pack. To each his own.