Video není dostupné.
Omlouváme se.
Train Sim World 2: Sherman Hill - Cheyenne to Laramie
Vložit
- čas přidán 26. 11. 2021
- The latest North American route for TSW2, 'Sherman Hill' runs various types of Union Pacific freight from Cheyenne Wyoming, to Laramie Wyoming and points in between. The SD70ACe and SD40-2 (SD40N?) complete the add on along with different rolling stock and operations of the modern era. In this video we'll take a look at the old railroad towns at both ends of the line, the industries in between, the rolling stock and engines.
This'll be the first of many videos covering the route in it's entirety.
----------
Thanks for watching, if you enjoyed the video please like and subscribe to stay up to date on the latest content. If you have already, thank you!
Stay safe out there.
----------
Sherman Hill:
store.steampow...
----------
Default SD40-2 for a timetabled run is set to the Cane Creek version for whatever DTG reasoning. New video will have a look at the actual 'new' SD40-2
The bell is the same wish it would be an e-Bell and the horn is a little quiet but finally we got a different horn for the locos
The 8400s weren't delivered with E-bells, so it's accurate.
There’s still 40 tracks with a train every 25 minutes on average. The big station is now a museum on 3/4 of it and a nice bar and restaurant on the eastern half. Crew depot next to it. Yard isn’t orange. A lot more dense in person. What people don’t know is there’s an entire underground tunnel system underground from the passenger days. We operate 7000 right now. Tennessee is furthest east we go. From a engineer that runs this route, cringe to see the route but enjoyed your video. Enjoyed and enjoy the info.
TSW got the yard pretty much spot on, and the tan shop next to round house is pretty much spot on. (it is the steam shop where they store and do maintenance on the steam engines). The round house mainly stores the retired desiel engines like the dd40ax and E8s
UP locomotives are now showing up on the Norfolk Southern routes along Southern NY state and Pennsylvania
Thank you for reviewing this route addon. I was a little cautious about this route after Cane Creek. It's nice to see the modern Reefers in this game - that's a plus and I think it's the first time that we do see modern Reefer cars within TSW2. I'm still mixed on this route. I may get it further down the road or wait until another route comes around. I would really like to see a route that's just made up of manual switches and have a switching route on TSW2, but that's just me.
Agreed. The stacks are nice as well vs. The csx hh stacks which are plain as day. Still a bit too colorful on sh but better
Thanks for the route intro! Looks like it might be worth a buy.
I would seriously wait to get this as its buggy as hell and needs quite a bit of optimisation. Forget the 10% discount as it will be back at a reduced price soon. (Just my advice)
@@RobertDodge What are the bugs? The bell was fixed yesterday.
I noticed the route looks a lot better when there is cloudy or rain conditions - The details in full sun seem to get washed out. Reminds me of the problem with ambient lighting they had Sand Patch grade back a couple of years. Need to wear rays, when playing, guess it makes it more realistic...
Pop! Sup man how you keepin?
Indeed it does, the colors are all faded, even trying out ini edits its hard to get it in a nice place. Cloudless sky at noon in summer is...... grey.
@@schnauzahpowahz Doing well. Wish you were streaming during the noon hour more often so I can drop in during lunch. Keep doing the train videos on CZcams.
1:09:09 the SD40-2 with the yellow stripe on the bottom has the bad horn the one with the red stripe has a new horn
Ahhhh thx for the heads up. Is it randomly placed in a service then?
@@schnauzahpowahz yes the AC4400 is randomly placed in service too it confused me when I first saw them
Yeah you have to "change livery" in loco selection screen to pick the one with red stripe, the yellow striped one is the one from cane creek, better interior on sherman's version as well
I honestly just bought this dlc for the Sd70ace being my favorite loco I couldn’t pass it up. I’m very happy with it as well I’ve been burning up sand patch with it in my NS livery and have already passed the CSX Ac44 in best locomotive. Absolutely love it
The cab isn't terrible...from experience wide bodies have that flat color to it, but the game definitely portrays it as very bright. Contrary to what people may think, those cabs have very dark hues to them and little light gets in. Under the desks are almost blacked out even in broad daylight. The engine sound is awful though lol. Cool review man!
I turn off the step lights and truck lights with external view (3), open the window engineer side and turn the switches off. It's way faster and I can do the rear loco too without getting out. I also set the rear light to dim and turn on the number lights for the rear loco as per regulations. The SD70ACe should have quite a loud cab (nickname: Thundercab). Also The engine is started by air, not by an electric starter (This one is loud too). Sadly It's not simulated in this DLC when you do the training for the SD70ACe :-(
It'd be great if they would have included a GEVO or like an AC4400 or something to go along with the ACE.
aye mayne ngl you had me dyin a few times 🤣good video
Kinda awesome to watch since I live in laramie
That's UPs steam shop where 844 and 2014 big boy and 3585? Challenger
You were looking at the SD40-2 from cane creek not the one from Sherman hill the second unit is a Sherman hill one you can see the diffrence with a closer look
Red striped one is the Sherman Hill one. It has much better horn sound.
When i do one of the uphill starts I cannot seem to get my locomotive moving. I am following the instructions from training but nothing
Thanks for the review I was waiting for this one, in my opinion it looks…. Not bad? But it also looks really really weird? It’s hard to put my thumb on it but the lighting and scenery throughout most of the line, especially Cheyenne is very flat. (Granted it is fucking Wyoming it’s not going to look like the Swiss Alps ) but I don’t know it just looks really odd. You go back to a route like sand patch and you can see that the lighting at the very least was spent a considerable bit more time on. From what I’ve heard they had to get this out by a deadline, why there’s no track three which… whatever. Not like people are gonna die without it but it’s interesting to say the least. The ACE actually doesn’t look bad, they actually got in contact with someone who has horn recordings for the first time in fucking forever.. if not THE first time. so it’s nice to see that ball finally moving. But as far as everything else on the locomotive I don’t know…. It all just looks like they didn’t really spend a whole lot of time studying the weathering and sort of just pulled whatever textures they could get from whatever assets they use. Also from what I’ve seen, (they’re not that high res) Granted again, I’m sure that’s for a good reason.
Good video, odd route.
I just updated to TW2 and I'm running csx heavy haul. Running sand patch I get steady 60fps with settings pretty high my GTX1070acx and my I-5 8700K runs it pretty good also 32gb of ram. Hope this info helps
1:07:26 Thats the wrong SD40 lol
Default SD40-2 for a timetabled run is set to the Cane Creek version for whatever DTG reasoning. New video has a look at the actual 'new' SD40-2
If the rock quarry were all the ballast is mined is tan than shouldn’t the track ballast also be tan
Thanks for the video, in now know i stick to clinchfield for freight, looks much better in my opinion.
They should make it where you can sit on the toilet while the train is going 60 down the mainline lol
How do you get that free camera?, is it available on ps4
I want steam so bad. There is nothing like taking a 4000 class over ole' Sherman.
I'm having a very hard time getting this train moving any tips anyone please!?!?!?
Man really want to get this , but the rail yards look very empty. Wish they would add more rolling stock sitting around to make it look more alive.
True. While these 2 yards dont see the traffic they once did, they are a bit light in game. All about that performance i guess. Cumberland on SPG same way
What should I get,this or Cane creek? I'm confused
You forgot to complain about a cloud that looked out of place lol
The brake pipe only blows up at 89 which will not release the brakes to move I have everything cut in but keep trying it ends up showing PCS red, I don't know what that is but now it won't create air. How do you get the brakes SD70 to release?
you think you are rail yard employee but you know nothing about trains coz every UP fan knows what PCS is U KNOW NOTHIN...... brake dont blow up either what that supposed to be
you making me angry spread supidity on the internet coz U DONT KNOW ANYTHING about these trains
u probably dont know what air breaks are
Pcs trips from not clearing an alerter (which isn't activated by default) or dumping the emergency brk. Make sure the control/fuel switches are on (up)
The om board computer screen must read "lead" and "cut in". On the radio make sure it says bank comm on. Release the brakes and depending on length, wait a few mins and take off
It would be cooler if they brought the UP bigboy
Try looking into a sound mod, I bet there is a good one out there.
czcams.com/video/MYujZ2ghunE/video.html
There is something in which they are erring a lot, And it is in the sounds, Especially that of the engines, Too low, There is no immersion, Thing that one playing, You really feel that something is missing :/
Precisely. I wish theyd put half as much manpower into sound editing than they do marketing
how to get that map?
the only gripe I have is Cheyenne and Laramie aren't very accurately modeled. lots of roads where there are none in real life, random buildings where they don't exist and such, but for anyone who has only seen Cheyenne in pictures then its probably fine. they also got the dispatch tower in the wrong spot
I'm in the definitely have not been there camp 😆 though I'd love to. Comparing it to the Train Sim classic version this panned out ok surprisingly, although lacking track 3
@@schnauzahpowahz the train sim classic is definitely worse...I wish they had better ground textures tho
Can anyone tell me if this sim works with Oculus
Not presently if im not mistaken. The game has to have the headset functionality built in. It may be on the list though, id check the dovetail games forum
Do crossing gates work?
yeah, there is at least one up near Hermosa. Its a bit weird animation wise but it seemed to do the job
drive the fliping train
No
Okay.
I hadn't bought this shit yet, right now it's 7 euros on sale and even at that price I'm not going to take it.
I do better on TS with a less beautiful game!!!
Thank you for your test, after Can Creek, I will once again pass this DLC.
Decidedly TSW2 is really "rotten", in fact no, tsw2 is good it's DTG which is bad.
Zawal.
Hi
oi
@@schnauzahpowahz loved the review m8
please retract your satatement on the SD40-2 or make and adjustment to the review...you're slagging something because you are not reviewing the correct loco...and people hear you complaining...take down the video already...Sherman Hill is a great add on!!
I made another video w the SH dash 2, as well as pinned a message regarding it as well. I'm not retracting anything. Its DTGs own fault for having the Cane Creek dash 2 as the default loco unless you change the livery, which myself and countless others will not know to do. Maybe for those that hang on every dtg/matt stream are in the "know", but its still their fault for not making it clear, or in a manual etc.