Hi, Thanks for the video. It's very easy to understand with the diagrams. Very good explanation. I have a question. I took one valve body with solenoid out from the journey at the auto wreckers. Seems in good condition. I want to replace it with my 2013 caravan. Can I do that? Plus When I was overhauling the valve body I noticed three check balls in the bag. I don't know where did they come from. One side under the gasket has 6 or 7 check balls which are intact and nothing came out from that side. I don't know where those three check balls go. Could you help me with that?
One more question, should I replace the O rings from the sensors too? Can I use any O rings or should I buy specific ones with special properties for transmission?
should there be a ball under the transmission fluid pressure sensor? One ball flew out, I didn’t see where it came from, but I saw a hole on the back of the transmission fluid pressure sensor and it looked very similar (to the place for the ball), so I installed it there. I'm not sure because of this the first gear is engaged for 2 seconds. and then it stops working. Reverse gear drives better.
There is no check ball located in the solenoids, please refer to the check ball locations in the video, if you need further assistance you can contact us at members.atra.com/contact
I had the same thing happen last week. I am certain I put the ball back in the wrong spot and now first gear will engage but then nothing. Reverse slams into gear. I’m pulling it back out after buying new check balls and will refer to a diagram on where they go. Hopefully this fixes my lack of drive gear.
Shoutout to my gatekeepers.
Hit that like button on your way in 👍
Hi,
Thanks for the video. It's very easy to understand with the diagrams. Very good explanation. I have a question. I took one valve body with solenoid out from the journey at the auto wreckers. Seems in good condition. I want to replace it with my 2013 caravan. Can I do that? Plus When I was overhauling the valve body I noticed three check balls in the bag. I don't know where did they come from. One side under the gasket has 6 or 7 check balls which are intact and nothing came out from that side. I don't know where those three check balls go. Could you help me with that?
One more question, should I replace the O rings from the sensors too? Can I use any O rings or should I buy specific ones with special properties for transmission?
should there be a ball under the transmission fluid pressure sensor?
One ball flew out, I didn’t see where it came from, but I saw a hole on the back of the transmission fluid pressure sensor and it looked very similar (to the place for the ball), so I installed it there. I'm not sure because of this the first gear is engaged for 2 seconds. and then it stops working. Reverse gear drives better.
There is no check ball located in the solenoids, please refer to the check ball locations in the video, if you need further assistance you can contact us at members.atra.com/contact
I had the same thing happen last week. I am certain I put the ball back in the wrong spot and now first gear will engage but then nothing. Reverse slams into gear. I’m pulling it back out after buying new check balls and will refer to a diagram on where they go. Hopefully this fixes my lack of drive gear.
Aperta CZcams e tela grande