BIG A$$ PEGS 🔥 How To Install Larger Foot Pegs on Your Old or Vintage Dirt Bike - 1989 Suzuki RM250
Vložit
- čas přidán 19. 08. 2022
- BIG A$$ PEGS 🔥 How To Install Larger Foot Pegs on Your Old or Vintage Dirt Bike - 1989 Suzuki RM250
So you have a super old moto & can't seem to find any pegs that "FIT"? Well here's your way around that!
Not only are larger pegs safer, & better looking- but your bike will be much more enjoyable to ride when you pull it off.
With a little creativity & research you'll be able to get some big a$$ foot pegs on your old dirt bike too, as seen on todays vintage 1989 RM250. Enjoy!
Full parts list for todays install is below for 1989 & 1990 Suzuki RM125's & RM250's
🔥Important links from mXrevival:
-Motorcycle Lift Stand: www.mxrevival.com/shop-tools
-"Come & Take It Flag": www.mxrevival.com/mxr-merch
🔥 More mXrevival:
-mXrevival Website - www.mxrevival.com/
-mXrevival Instagram - / mxrevival
-mXrevival TikTok - www.tiktok.com/@mxrevival?lan...
-mXrevival Facebook - / mxrevivalonline
🔥 Questions? Comments? Need my help with something? Just ask me here: www.mxrevival.com/contact
🔥Important videos from mXrevival:
Gnarly frozen swingarm & swingarm bearing removal/ replacement:
• Fixing THE WORST Dirt ...
PARTS LIST FOR THIS VIDEO:
🔥 Pegs:
IMS Super Stock pegs # 275511: imsproducts.com/products/ims-...
The following OEM parts can be found here by using the "2002 Suzuki RM250" as the machine your using to locate parts: www.rockymountainatvmc.com/oe...
All of these parts are found under "Stand - Footrest Model K1/K2" microfiche:
🔥 Peg pins
(2 pins) 09200-10019
🔥 Peg springs
(1 right) 09448-18030
(1 left) 09448-18029
🔥 Pin washers -
(2) 08322-0110A
🔥 Cotter pins
(2) 04111-2520A
#mxrevival #RM250 #Suzuki - Sport
"some of you guys are into that anyways" 😂
Love how you slipped it in there so casually. And I realize how THAT sounds too 😂
Hahaha, you busted me!
Drill bits in mm’s 😂😂 yeah they exist. Only the whole rest of the world uses them. 🙋🏼♂️ from me over here in Australia haha
Cocky Americans! 🤣
This same system works on the 1986 RM250 as well. Just installed this system and worked perfectly. Must have upgrade.
sweet another video.. haven't even watched it yet haha... quickly becoming my favorite channel.. lettsss Goooo
Appreciate you!
I have an 89 RM259 myself and used this video as an aid so thank you for that.I actually beveled the backside of my IMS pegs on a disk sander and the DRZ springs will lock right into the factory spots and unless you were were told they weren't a direct bolt on you wouldn't know.
Awesome! I’m glad it helped. I know exactly what you mean about making the springs lock in too. Great idea, Ryan 🔥
yes, back in the day, we had skinny foot peg and we were happy to have them! If you rode hard your feet were never on the pegs any way. We were men dam it!
Hahaha, this is epic
Again great video my brother. Got me hooked on the rm250 content lol
Thank you my brother!
If a metric drill bit exists good lord your a mechanic. I need a raise. Guess what they even make left-handed drill bits these days can you imagine that
Thanks for watching! (It’s actually spelled “you’re”)
Great video!
Thank you, G!
Looks great brother. I usually use IMS Pro Series pegs but on slightly newer bikes no mods needed. Thankfully! Cheers.
Thank you Robert! Very true too
Older bikes were designed to sit on, not stand. Wide foot pegs were not required. It was not till the aluminum frame design that riding style changed to standing more which was made easier with the wide pegs.
That makes sense! The the seats on these cool old bikes certainly proves that
HA!!, did the same thing to my old '90 RM250 - would post a picture if I could. FYI, I did have a 10mm drill bit but sometimes you have to use what you have. Either way this is a great mod for any old bike (including my '87 Can-Am 200 ASE 😊).
Hell yeah, that Can-Am is a gem
Good Job !! Those old pegs are twigs....is it wrong that I find it weird to watch you work on a bike that is not pristine..when most of us run that 🤣🤣🤦♂️
Haha! It is kind of weird scabbing parts onto a bike that I know needs more love, much more love, than I'm giving it for the time being. Truth be told, everything that doesn't have something to do with a full build that people can win, is just filler material! Getting ready to launch again soon!
These are really great Charles! BTw did you have a video on how to properly clean / save a used airbox. Trying to learn new tricks!
Thank you! Maybe not an airbox video but I did have this old video I put together for polishing up a fuel tank: czcams.com/video/J4XasNjJJgY/video.html
If you have deep gouges, this won't be enough but I was actually surprised at how well this worked especially for how little effort and money it required.
If you have some serious damage, and I mean damage that might even lead you to believe you should throw your parts away... You have to check out my boy Phil at Plastic Renovations. He is not human, all the work is God mode!
@@mxrevival Thanks for the tips dude! 👊🏼
the only tool you didn't list is an ice cold beer to enjoy when you're done the mod!
Word!!! I totally blew it!
I had a nightmare trying to find footpegs for my 06 RM250. The ones I could "get" in the UK turned out to be for RMZs. In the end I bought Raptors because the import fees for buying from the USA made them even more expensive.
Even still, the raptors had to be specifically built for me and they didn't fit correctly - the kick stand would wedge itself on the peg. In the end I had to massage the underneath of the peg with an angle grinder to stop it catching and tearing chunks out of the kickstart.
That still, those raptors work a treat. No longer slip off the pegs now.
Oh, and for opening up those holes, I find reamers to be better, especially if you're opening up titanium pegs.
The OEM pegs on the 06 are titanium hopefully you kept them also
@@jondoyle8741 I've still got them. They're worn out after multiple resharpenings but good to keep "just in case"
Man that's a bummer! Here's a cool tip that you might like. 2012 and up KTM pegs fit the RM chassis. You can use the KTM springs as well. I figured this out while doing a little bit of research for an upcoming RC4 replica build. Stumbled across enough matching information and photos to confirm and I will be doing it myself as well soon. Thank you for watching!
They make every size drill bit you could ever imagine, they aren’t sold at most hardware stores though.
Need me some metrics for these rare occasions 💪
My stock pin on my 01 YZ250 is too thick to go into the tusk foot pegs, have any of you guys had to drill out the holes on the actual aftermarket foot peg? I was annoyed4to find that tusk didn't provide a new pin and spring.
niiiiiiice
😍🙏
Hey man. BITD we didn’t have an option for bigger pegs 🤣 Wish we did though
True, and fair!
Can use rmz/drz peg, just have to do the same, have them on my 91 125
🤘 that's exactly what these are, DRZ
I have a 2000 rm250 and the pegs are still too small one of the first upgrade I'm doing.
Perfect;m! These will fit!
Get a welder, make half cage to hang off back of peg for foot clearance, costs less money than chips in expensive grease.
Had I not found out I could pull this off, that would have been the route! But I know most the people in my audience will be happy to have a more direct solution that they're more likely to try. Imagine how nasty and sharp we could get them with the welding mod?? Thanks for watching Daniel
3/8th of an inch is just smaller then 10 mm FWIW ;)
Felt that way! Thanks for watching!!