Part of me is wishing for a shorter model but then the other part of me is not because then I’d regret my newly purchased XCOVER. I dig the low profile height, slightly easier setup, and the modularity is really nice. Profile aluminum is the GOAT for customization. Cool product nonetheless. Thanks for the upload as always Mike! I hope this message finds you, Ashley and the little bun in the oven well.
I Camper needs to have a shell on the sky camps that allow solar panels to be mounted and option on which side of vehicle entrance can be. They may already but I am not aware.
Mike if your trying to grow out your beard use minoxidil for 6 months. For some reason for facial hair the growth is permanent. Not sure exactly why but it does work I had a patchy ass beard tried it for 6 months and now I do not have a patchy beard.
Dude your last vid inspired me to see if I can grow a beard for the first time (40yrs young) aaaaaand you have much more grass growing than I do! I think I'm screwed lol, but your looking rugged ha! Keep it going! 🤘
Super clean set up! I have a 3 year old Roofnest Falcon XL on my Gen 1 Sequoia, along with an ARB awning, but this iKamper design is so much nicer! I like how the top shell on the iKamper completely covers and encloses everything. The Roofnest has a not-so-great rubber gasket around the center portion of the clamshell which leaks while in the closed position, especially while driving in the rain...boy does it leak. No friends, I'm not sponsored by iKamper. And, yes I'm keeping my Roofnest until it wears out (it was expensive and I just gotta live with it 😩).
That's interesting. I have the Falcon 2.0 and I haven't had this problem. Maybe I haven't used it enough. I did only get it in March of this year and used it maybe 20 times. Was this an issue from the beginning?
@@bogotstogoskiing Sounds like they probably resolved the issue for the 2.0 version. When I contacted them about the problem they, oddly enough, had new and more robust seal on standby, which they promptly sent out to me (this tells me that they were already aware of this issue). Only problem is, it's impossible to install the new seal properly without completely taking the clamshell apart - top needs to come off, struts removed, tent unzipped, etc. Their solution was to tell me to cut the new seal and painfully feed it through the channel one inch at a time. I gave up once I saw what needed to be done.
iKamper having an option to get it unassembled is awesome! I'm sure the DIY RTT would really love if they sold the parts separately too. And that awning looks awesome! Would be awesome for those hot days out shooting. At this point, I think the Sequoia should get a full build and a wrap. Might as well at this point. 😉 Oh, and I'm sure you don't really care, but I gave the Tremor bumper to my brother. He has a similar truck to mine that is getting painted and some other modern touches. I figured it would probably go better with his truck. I'll still send some pics when it's done just in case you wanted to see what become of that ole bumper.
Keep pushing through the beard man. I never grew one and one finally one day said screw it. It looked like I had the mange for a while but eventually it grew out and I've had one since and never looked back.
I haven’t been camping since high school, so I love living vicariously through you. Thanks for another great video. One day I’ll build a nice rig to just go out and get away!!!
Great video of new Ikamper product Mike. Also I would like to say thank you for pushing R4T for maxtrax recovery boards mounts and collaboration with DiamondBack covers & Front Runner for developing load bar rack system.🤙🤙 Well may be iKamper is based in South Korea, but they do a lots of things in China, like annex room, additional canopy poles, insulation tent and etc. I have a Ikamper mini on short bead of my truck and when I got it, was a label on box made in South Korea, but the rest I mean poles, insulation tent, annex which I have, was clearly labeled on tag inside carrying bags and shipping boxes made in China. What a surprise......🤣🤣🤣 Anyway, they do a great products and hopefully quality will be at top end even if they made products in China.🙂
Hey, hey! The beard is looking good! Nice progress so far. Thank you for sharing the ikamper. I think this tents are pretty cool. May God bless you and your family!😁♥
I was trying to figure out how you mounted both...then realized you offset the tent. I have a prinsu on my gx470 and the skycamp2.0 and haven't been able to mount an awning.
@@LastLineOfDefense I did with mine too it was patchy and people said it looked like I poorly glued pubes to my face. The more I let it grow the better it filled in. I am happy with it now, but it took a while to get to that point.
Hey this is a bit of a weird message BUT.. I was wondering if you think visiting Colorado Springs during mid-December is too dangerous? I’m from Houston so I would be driving (2017 4x4 Tacoma). I have limited experience with snow so before I plan a trip out I want to get someone who I respect and actually lives out there opinion on it! We wouldn’t do any hardcore wheelin’ . Just ski first day, train-ride and pikes peak the 2nd, and maybe a little exploring + city the 3rd. Any feedback (or recommendations) would be appreciated man!!
I saw on another channel where they mounted the roof top tent so that it opens towards the front of the truck. Then the awning can wrap around the rear and there is no interference between the two. I’d be interested in your take if you try that out.
Hey man great vid. I’m a solo camper in a tent. I’m looking into the icamper t not like you have showed here. I have a F250 2022 would u know what I would need?
Nice! Thanks for video. I just got my eco shell awning last week. Working on mounts for frontrunner slimline as the ones Ikamper sends you with awing don’t work without spacers. Anyhow, beards looking good bro! Keep it going!!👍🏻
$1700 for the awning is really tough to swallow. I just shopped a number of awnings and, as cool as the ikamper 270 is, it’s not worth double the cost over other brands just for an aluminum cover.
Feel like iKamper had to eventually do a wedge tent to round out their catalog. Some nice features there but not up there with the kind of innovation they displayed with the Skycamp and X-Cover. The EXO’s hard shell is a super smart idea and it’s one of those “why haven’t all companies already made something like this for years?” moments.
Yeah. Agreed. I have a Roofnest Falcon 2.0 and it definitely suits me better than this one. That being said, the iKamper Skycamp was the original RTT I wanted but my cruiser wouldn't fit in the garage with it. That was a big deal to me. Overall I don't regret my purchase.
iKamper makes nice stuff, but I'm disappointed by their choice of latch for the tent. I had these latches on a cheaper hard shell RTT and they are not good. Every single one started to fail with the cable and even had to replace one. Hopefully they switch to something more robust.
Sorry if you've talked about this elsewhere but do you have any recommendations for securing these to a prinsu rack? My wife and I had our iKamper stolen this past weekend, had the security latches for the iKamper but they just took the bars and lifted it right off.
I have both that exact tent and awning for my 4runner but with a victory 4x4 roof rack. The awning brackets won't work with my rack. What are you using to mount both tent and awning together?
@@LastLineOfDefense yeah, I would imagine it is also, just looks like it might soak up some. With my tires that area might get too dirty, but maybe not. Sweet tent for sure!
Not interested in the Apple Watch review because my buddy just got it and talks about how awesome it is knowing damn good and well I’m not upgrading from my SE 🤣
@@LastLineOfDefense I think all systems have their fair share of good and bad, the key question is: are you better off than 10 or 20 years ago? The system in China has lifted about 800 million Chinese from extreme poverty in the past years without firing a single bullet, are they better off? 99% of people in China will say yes. You can’t say the same here in America, you can’t say the same in India which is the largest democratic country in the world.
They are capable of making high quality products, yes, but most of the stuff coming out of China simply isn't high quality. Not because they aren't capable of it, but that is what quality was specified and ordered by the buyer. There is no dispute that the stuff coming out of China nowadays is much better quality than 20 years ago. Nevermind the political issues.
Yes, do a review! Even though I already ordered one. Want to get your take on cases, straps, etc. too.
Pretty unique tent cover that is air gapped. Like a built in rain-fly. That'll be awesome for a bit more insulation in heat or cold!
Part of me is wishing for a shorter model but then the other part of me is not because then I’d regret my newly purchased XCOVER. I dig the low profile height, slightly easier setup, and the modularity is really nice. Profile aluminum is the GOAT for customization. Cool product nonetheless. Thanks for the upload as always Mike! I hope this message finds you, Ashley and the little bun in the oven well.
Appreciate the kind words!
I Camper needs to have a shell on the sky camps that allow solar panels to be mounted and option on which side of vehicle entrance can be. They may already but I am not aware.
Mike if your trying to grow out your beard use minoxidil for 6 months. For some reason for facial hair the growth is permanent. Not sure exactly why but it does work I had a patchy ass beard tried it for 6 months and now I do not have a patchy beard.
I wish iKamper wasn't so expensive 🥲 you should do a budget-friendly video on RTTs
Dude your last vid inspired me to see if I can grow a beard for the first time (40yrs young) aaaaaand you have much more grass growing than I do! I think I'm screwed lol, but your looking rugged ha! Keep it going! 🤘
Super clean set up! I have a 3 year old Roofnest Falcon XL on my Gen 1 Sequoia, along with an ARB awning, but this iKamper design is so much nicer! I like how the top shell on the iKamper completely covers and encloses everything. The Roofnest has a not-so-great rubber gasket around the center portion of the clamshell which leaks while in the closed position, especially while driving in the rain...boy does it leak. No friends, I'm not sponsored by iKamper. And, yes I'm keeping my Roofnest until it wears out (it was expensive and I just gotta live with it 😩).
Most important thing is that you’re out there using it!
That's interesting. I have the Falcon 2.0 and I haven't had this problem. Maybe I haven't used it enough. I did only get it in March of this year and used it maybe 20 times. Was this an issue from the beginning?
@@bogotstogoskiing Sounds like they probably resolved the issue for the 2.0 version. When I contacted them about the problem they, oddly enough, had new and more robust seal on standby, which they promptly sent out to me (this tells me that they were already aware of this issue). Only problem is, it's impossible to install the new seal properly without completely taking the clamshell apart - top needs to come off, struts removed, tent unzipped, etc. Their solution was to tell me to cut the new seal and painfully feed it through the channel one inch at a time. I gave up once I saw what needed to be done.
Maybe some flex seal spray on the seam (they sell clear, but it yellows in the sun) or some RTV/caulk on the seam might help.
so cool! awesome video! (P.S. yes, please do a apple watch ultra review video)
iKamper having an option to get it unassembled is awesome! I'm sure the DIY RTT would really love if they sold the parts separately too. And that awning looks awesome! Would be awesome for those hot days out shooting.
At this point, I think the Sequoia should get a full build and a wrap. Might as well at this point. 😉
Oh, and I'm sure you don't really care, but I gave the Tremor bumper to my brother. He has a similar truck to mine that is getting painted and some other modern touches. I figured it would probably go better with his truck. I'll still send some pics when it's done just in case you wanted to see what become of that ole bumper.
Keep pushing through the beard man. I never grew one and one finally one day said screw it. It looked like I had the mange for a while but eventually it grew out and I've had one since and never looked back.
man, I still cant decide if I want to go with bdv or mini 3.0 for my taco (w/ RSI Smartcap)
I haven’t been camping since high school, so I love living vicariously through you. Thanks for another great video. One day I’ll build a nice rig to just go out and get away!!!
I ordered the pre-assembles version of the BDV and it’s here…I love how good it looks!
Can we get an update on how the awning has held up. Pros & Cons
Actually beard becomes you! Yeah, don't quit! I like white SUVs.
Great video of new Ikamper product Mike.
Also I would like to say thank you for pushing R4T for maxtrax recovery boards mounts and collaboration with DiamondBack covers & Front Runner for developing load bar rack system.🤙🤙
Well may be iKamper is based in South Korea, but they do a lots of things in China, like annex room, additional canopy poles, insulation tent and etc. I have a Ikamper mini on short bead of my truck and when I got it, was a label on box made in South Korea, but the rest I mean poles, insulation tent, annex which I have, was clearly labeled on tag inside carrying bags and shipping boxes made in China.
What a surprise......🤣🤣🤣
Anyway, they do a great products and hopefully quality will be at top end even if they made products in China.🙂
Hey, hey! The beard is looking good! Nice progress so far. Thank you for sharing the ikamper. I think this tents are pretty cool. May God bless you and your family!😁♥
Literally came here for the beard update 😂 looking good mike! Keep it going lol
Beard's coming along
I was trying to figure out how you mounted both...then realized you offset the tent. I have a prinsu on my gx470 and the skycamp2.0 and haven't been able to mount an awning.
Not sure how you are feeling about it. But I am liking the progress on your beard.
I think it's pretty gross, but I made a promise to give it a go, haha
@@LastLineOfDefense I did with mine too it was patchy and people said it looked like I poorly glued pubes to my face. The more I let it grow the better it filled in. I am happy with it now, but it took a while to get to that point.
Hey this is a bit of a weird message BUT.. I was wondering if you think visiting Colorado Springs during mid-December is too dangerous? I’m from Houston so I would be driving (2017 4x4 Tacoma). I have limited experience with snow so before I plan a trip out I want to get someone who I respect and actually lives out there opinion on it! We wouldn’t do any hardcore wheelin’ . Just ski first day, train-ride and pikes peak the 2nd, and maybe a little exploring + city the 3rd. Any feedback (or recommendations) would be appreciated man!!
Do you think IKamper will make an aluminum version of the skycamp and skycamp mini???
That awning is pretty sikk. I'm going to have to check it out and see if it'll work on my Ranger.
I saw on another channel where they mounted the roof top tent so that it opens towards the front of the truck. Then the awning can wrap around the rear and there is no interference between the two. I’d be interested in your take if you try that out.
The beard is looking good my friend. Love the tent and the content. Keep up the good work.
Hey man great vid. I’m a solo camper in a tent. I’m looking into the icamper t not like you have showed here. I have a F250 2022 would u know what I would need?
Nice! Thanks for video. I just got my eco shell awning last week. Working on mounts for frontrunner slimline as the ones Ikamper sends you with awing don’t work without spacers. Anyhow, beards looking good bro! Keep it going!!👍🏻
Yeah maybe just some thick spacers/washers?
$1700 for the awning is really tough to swallow. I just shopped a number of awnings and, as cool as the ikamper 270 is, it’s not worth double the cost over other brands just for an aluminum cover.
What awning works with tailgate? I’m in the market now for one
Yes, you should do a review on the watch 🙏🏾
Please, please do a review on the Apple Watch Ultra. I definitely want to know more about that watch. It looks pretty phenomenal.
Hello
What roof rack would I need for my 5th gen 4ruuner to be able to mount this RoofTop Tend and Awning?
Thanks
Love that awning! Cant afford the tent or the awning, but love it! lol!
Feel like iKamper had to eventually do a wedge tent to round out their catalog. Some nice features there but not up there with the kind of innovation they displayed with the Skycamp and X-Cover. The EXO’s hard shell is a super smart idea and it’s one of those “why haven’t all companies already made something like this for years?” moments.
Yeah. Agreed. I have a Roofnest Falcon 2.0 and it definitely suits me better than this one. That being said, the iKamper Skycamp was the original RTT I wanted but my cruiser wouldn't fit in the garage with it. That was a big deal to me. Overall I don't regret my purchase.
iKamper makes nice stuff, but I'm disappointed by their choice of latch for the tent. I had these latches on a cheaper hard shell RTT and they are not good. Every single one started to fail with the cable and even had to replace one. Hopefully they switch to something more robust.
My boy mike got the beard going on 😂🔥
That would be perfect on my 4Runner and using my Klymit Hybrid double air mattress.
Great video Mike. Do the Apple Watch Ultra video. Curious how long that battery life is actually lasting.
1st gen sequioa’s going to jump up in value
They’re pretty pricey already!
@@LastLineOfDefense still a bargain vs Land Cruisers, 4runners, and tacomas.
They already did people wanting 11k for a 250k plus truck.
Does this fit on your tundra bed rack?
I would love to have a setup like this! Great video brotha 🤙🏽 fyi the delta stretch 2.1 are the best “pant” ever 😂
Still my favorite!
What mounts did you use with the prinsu? Sorry if you said it….
HELL YEAH man! cant wait to see it go out!
whats your thoughts on it not being zipped/sewn to the shell?
Sorry if you've talked about this elsewhere but do you have any recommendations for securing these to a prinsu rack? My wife and I had our iKamper stolen this past weekend, had the security latches for the iKamper but they just took the bars and lifted it right off.
im really keen on getting an ikamper mini. which is more homie and comfortable of the two? cheers
How did you mount the awning?
Sweet!!
🙏
That beard tho 😎 it’s looking good on you bro no homo lol
What are your thoughts on the BDV vs the GFC ?
I like the beard
I have both that exact tent and awning for my 4runner but with a victory 4x4 roof rack. The awning brackets won't work with my rack. What are you using to mount both tent and awning together?
Did you ever get an answer to this? I have a 4runner and what to use the same tent and awning
I did not, unfortunately.
Keep growing the beard bro!
Is the canvas on the bottom just below the mattress waterproof? Dirt, mud, how would that effect that part?
I would imagine that it’s waterproof
@@LastLineOfDefense yeah, I would imagine it is also, just looks like it might soak up some. With my tires that area might get too dirty, but maybe not. Sweet tent for sure!
That’s what I need , that’s sweet
That's explain the facial hair mate.
Watch the previous video, haha
Cool tent but seriously Mike ... Shave that patchy awfulness off lol . We miss the smooth baby faced Mike that we all love and admire 👍
Not interested in the Apple Watch review because my buddy just got it and talks about how awesome it is knowing damn good and well I’m not upgrading from my SE 🤣
Most of what I like about the Ultra, is really just stuff that I like about smart watches - so you’re good!
Looking a bit like Mike Glover from field craft survival lol with the Beard
AHHHHHHHHHHHHHHHHHHHHH
1st
👊🏽👊🏽
@@jbstuff I remember when Ricky Bobby said if you ain't first, you last. Sarcasm is a sign of longing and sadness.... I'll pray for you.
@@LastLineOfDefense this should get interesting 😆
Just to be fair, China is making high quality products as well😎
Fuck China!
Yes, obviously. The problem with China isn't their ability to make quality products, it's the the CCP.
@@LastLineOfDefense I think all systems have their fair share of good and bad, the key question is: are you better off than 10 or 20 years ago? The system in China has lifted about 800 million Chinese from extreme poverty in the past years without firing a single bullet, are they better off? 99% of people in China will say yes. You can’t say the same here in America, you can’t say the same in India which is the largest democratic country in the world.
They are capable of making high quality products, yes, but most of the stuff coming out of China simply isn't high quality. Not because they aren't capable of it, but that is what quality was specified and ordered by the buyer. There is no dispute that the stuff coming out of China nowadays is much better quality than 20 years ago.
Nevermind the political issues.
Who is this bearded cat and what did he do with Mike? 🤣