Hi Chris, Im based in Bangkok Thailand and have owned my BYD Seal Performance since December last year, and love driving the Seal everyday, it is one of the best EV's on the road. You should do a conference call with BYD owners to get there input, Im happy to participate.
hi sean, i watched review from UK saying that the driver can feel quite vibration (not quite smooth) on the steering wheel when passing a rough surface road, do you experience that ? please kindly share your experience. I am planning to buy one but still doubt because of this matter
Great video. A quick feedback mate. You asked him a question, he was responding and you cut him off and changed the conversation. I wanted to know his view on that very important question but he didn't get to respond in full. Otherwise, fantastic. Great stuff.
BYD LFP Blade Battery should be charged to 100% at least once every 10 days and let it fall below 10% even below 5% then charge to full. Good for the BMS.
no need to do that. Once a month is more than good enough. I have had my Han sitting there for 2-3 months without using the car while i wad on long trips. I came back to a battery that was as fully charged as I left it.
The exterior is designed by Audi's head designer Wolfgang Egger. And the interior by one of the guys at Mercedes. It's a 5 star EURO Ncap. Some Tesla models use BYD's blade battery or CATL. Bare bones JDM cars are in big trouble.
Totally agree on the comments about negativity and nitpicking in the owner forums and EV social media. So many entitled armchair experts 🙄unfortunately finding useful dispassionate information within these forums can be very difficult and time consuming. This is not however confined to EVs I’ve found the same dispiriting issue in other owners forums for motorcycles and classic cars as well frustrating but the nature of the beast I guess.
Thanks for the review. I’m reviewing the BYD Seal Premium in sunny Singapore. Would be great to hear comments and inputs from owners and how this compare against the likes of the Tesla Model 3 (highland), Ioniq 5 or 6 or equivalent options in the market?
We also have an Atto 3 - had it for ~4months. I was all set to purchase a Seal. Probably the Performance. I drove both the Premium and Performance. Unfortunately, I had to cancel as I found the clearance to the road a bit low for my steep(ish) driveway into my carport. I was guaranteed to scrape the front edge of the bumper. I was also worried about damage/scraping to the bumper from other sources as well. I've on order a Model 3 LR AWD which gives me about 4 centimetres extra clearance. I'm mindful that the Tesla is also lower compared to say an Atto 3 SUV so I need to be vigilant to its ground clearance as well. Whilst I'm sure I would have been happy with the Seal - I'm really looking forward to the Tesla, and the matrix headlights look very useful. The price of the Seal - Premium or Performance is VERY competitive compared to the Tesla RWD/AWD variants. But I'll soon get over the ~4k difference. 😀 Looking forward to never (I hope) having to visit a petrol station again.
The Seal is not as low as the specs would have you think. The lowest point is quite close to the wheels so you are unlikely to scrape compared to a Tesla M3. And it's just a plastic air deflector.
@@ChrisEVcars Yes, the Sealion looks like a good option. I decided to stay with a sedan as we have the Atto 3 SUV. The Polestar was a little out of my budget. Truth is the Tesla was a bit as well. LOL!
@e2zq Sorry Gene, it is low on my downwards sloping driveway. I wasn't able to find any meaningful specs on height from the bumper to ground. I had to measurer it myself. It's lower than my 2015 VW Polo, and that is quite low. As I said 2 centimetres as measured with a measuring tape. At the back of the bumper (near the wheels) is further off the ground on a downwards sloping driveway. As obviously it would be. The front of the bumper WILL scrape. Not the back part. The deflector (I think it's black plastic IIRC) is part of the bumper and is not designed to be removed. Removing it will change dynamics, stability and efficiency. The demo RWD I drove had under 600 kilometres on it, and there was already scraping damage to the bottom of the front of the bumper. As I pointed out to the salesperson and showed him - "there is my problem". If the Seal was a little higher, I'd be driving my own well and truly by now. Having paid the 1k deposit I was all set for purchase. I'm sure most owners will be happy with the Seal. But prospective owners need to be aware of possible clearance issues when driving this vehicle, and then make their purchase knowing this could be a problem on some driveways and gutters as well as those annoyingly variable height parking space concrete stops, which catch many drivers - even in some higher clearance vehicles.
Do you have to turn off the sound "nuisances" each time you get in, or does it remember your preferences? And what about handling of the RWD in wet conditions (rear break-out?)?
@@ChrisEVcarshi mate I had test drive byd seal yesterday, I feel uncomfortable vibration on the steering wheel when passing rough asphalt road, feels like not enough cushion on the front axle, do you feel it too ?
@@RhezaPahlevi Raising the vehicle would likely degrade the Seal's excellent drag co-efficient, which is I think 0.21. Something that is important for EVs with repect to eeking out as much range as possible.
Hi Chris, Im based in Bangkok Thailand and have owned my BYD Seal Performance since December last year, and love driving the Seal everyday, it is one of the best EV's on the road. You should do a conference call with BYD owners to get there input, Im happy to participate.
Hi Sean, good to hear you love your car. That's a great idea. I will keep your details.
@@ChrisEVcars Thanks Chris.
hi sean, i watched review from UK saying that the driver can feel quite vibration (not quite smooth) on the steering wheel when passing a rough surface road, do you experience that ? please kindly share your experience. I am planning to buy one but still doubt because of this matter
@@MHWibi I've taken a TD and tried it over potholes... no more then any other well built car.
BYD Seal Supercar The best EV in the world
Sorry, it's not a super car of byd,
Byd's supercar is Byd yangwang u9.
I would love to get a video on battery degradation of various battery types after 100,000 km and a couple of years.
Great video. A quick feedback mate. You asked him a question, he was responding and you cut him off and changed the conversation. I wanted to know his view on that very important question but he didn't get to respond in full. Otherwise, fantastic. Great stuff.
Thanks for the tip!
BYD LFP Blade Battery should be charged to 100% at least once every 10 days and let it fall below 10% even below 5% then charge to full. Good for the BMS.
Manufactures unusual recommendations.
no need to do that. Once a month is more than good enough. I have had my Han sitting there for 2-3 months without using the car while i wad on long trips. I came back to a battery that was as fully charged as I left it.
@@qilu2004 A country where Han is sold!!
@@qilu2004 Seal is a new architecture.
The exterior is designed by Audi's head designer Wolfgang Egger. And the interior by one of the guys at Mercedes. It's a 5 star EURO Ncap. Some Tesla models use BYD's blade battery or CATL. Bare bones JDM cars are in big trouble.
Totally agree on the comments about negativity and nitpicking in the owner forums and EV social media.
So many entitled armchair experts 🙄unfortunately finding useful dispassionate information within these forums can be very difficult and time consuming.
This is not however confined to EVs I’ve found the same dispiriting issue in other owners forums for motorcycles and classic cars as well frustrating but the nature of the beast I guess.
It's best to find one person on the forum you can trust. Plenty of good people out there.
True this is my strategy just takes time to find the nuggets 😁👍
Apparently BYD has done the update to lessen the amount of adas issues and the speed limit beeps are much more quiet
Thanks for the review. I’m reviewing the BYD Seal Premium in sunny Singapore. Would be great to hear comments and inputs from owners and how this compare against the likes of the Tesla Model 3 (highland), Ioniq 5 or 6 or equivalent options in the market?
Good Review, keep going Chris.
Thanks for your feedback. it inspires me to keep going:)
I just love driving my Atto 3
We also have an Atto 3 - had it for ~4months. I was all set to purchase a Seal. Probably the Performance. I drove both the Premium and Performance.
Unfortunately, I had to cancel as I found the clearance to the road a bit low for my steep(ish) driveway into my carport. I was guaranteed to scrape the front edge of the bumper. I was also worried about damage/scraping to the bumper from other sources as well. I've on order a Model 3 LR AWD which gives me about 4 centimetres extra clearance. I'm mindful that the Tesla is also lower compared to say an Atto 3 SUV so I need to be vigilant to its ground clearance as well. Whilst I'm sure I would have been happy with the Seal - I'm really looking forward to the Tesla, and the matrix headlights look very useful.
The price of the Seal - Premium or Performance is VERY competitive compared to the Tesla RWD/AWD variants. But I'll soon get over the ~4k difference. 😀
Looking forward to never (I hope) having to visit a petrol station again.
Hi Paul, I cancelled my Seal order for the same reasons as you. Will hold out for the Sealion , hopefully the end of this year.
The Seal is not as low as the specs would have you think. The lowest point is quite close to the wheels so you are unlikely to scrape compared to a Tesla M3. And it's just a plastic air deflector.
@@ChrisEVcars Yes, the Sealion looks like a good option. I decided to stay with a sedan as we have the Atto 3 SUV. The Polestar was a little out of my budget. Truth is the Tesla was a bit as well. LOL!
@e2zq Sorry Gene, it is low on my downwards sloping driveway. I wasn't able to find any meaningful specs on height from the bumper to ground. I had to measurer it myself. It's lower than my 2015 VW Polo, and that is quite low. As I said 2 centimetres as measured with a measuring tape. At the back of the bumper (near the wheels) is further off the ground on a downwards sloping driveway. As obviously it would be. The front of the bumper WILL scrape. Not the back part. The deflector (I think it's black plastic IIRC) is part of the bumper and is not designed to be removed. Removing it will change dynamics, stability and efficiency.
The demo RWD I drove had under 600 kilometres on it, and there was already scraping damage to the bottom of the front of the bumper. As I pointed out to the salesperson and showed him - "there is my problem".
If the Seal was a little higher, I'd be driving my own well and truly by now. Having paid the 1k deposit I was all set for purchase.
I'm sure most owners will be happy with the Seal. But prospective owners need to be aware of possible clearance issues when driving this vehicle, and then make their purchase knowing this could be a problem on some driveways and gutters as well as those annoyingly variable height parking space concrete stops, which catch many drivers - even in some higher clearance vehicles.
Do you have to turn off the sound "nuisances" each time you get in, or does it remember your preferences? And what about handling of the RWD in wet conditions (rear break-out?)?
What a nice channel and thank you for the nice review!
Thanks for watching!
Interesting feed back from a real owner. You should interview a highland owner. Do you know anyone with a highland. Lol
I can try:)
Nice one.
Nice vid Chris 😉
Thanks 😁
@@ChrisEVcarshi mate I had test drive byd seal yesterday, I feel uncomfortable vibration on the steering wheel when passing rough asphalt road, feels like not enough cushion on the front axle, do you feel it too ?
Does anyone know how to cancel the timer on the Atto interfering with the wall charger timer off peak
Search BYD Facebook group.
You can set the timer to be off, once only, specific days or everyday. You probably need to change your settings in the Schedule Charging Timer.
is it possible to lift up the ground clearance a little bit ?
No it's not possible. That how the car was designed.
@@ChrisEVcars someone should made the lift kit then.
@@RhezaPahlevi Raising the vehicle would likely degrade the Seal's excellent drag co-efficient, which is I think 0.21. Something that is important for EVs with repect to eeking out as much range as possible.
I notice you fitted a VIOFO dash cam instead of the BYD dash cam.
Yes it is 24 hours video surveillance .
Yes, has a rear camera as well as the ability to record in parking mode.
A good car