Corsa D ABS Pump Problem..What To Do.
Vložit
- čas přidán 27. 11. 2018
- Common failer on Corsa D is the ABS pump..is your car pulling to one side..will it not bleed on one side..this describes and shows the problem and what to do.
filmed in real time with my mobile phone.. - Auta a dopravní prostředky
Excellent breakdown, and explanation of typical ABS system. I am now a lot wiser! Many thanks 😆👍
Mate you are a legend, i have the same problem on my corsa d, drivers side, i thought my caliper was ceased so i stripped it, then thought the hose was blocked and then watched this video, you saved me a lot of messing about and garage fees, ordered a second hand one for 70 quid, thanks a million mate ☺
Nice one..glad it helped you out and saved you some dosh.
I did everything you've done, starting with caliper, hose and metal tube, the problem was on the first channel on the abs pump itself, valve was stuck in closed position. I heated the pump on oil radiator 😅 for an hour, sprayed valve opening with wd40, generously, and hit it with a hammer couple of times 😬 close to jamed valve, after that valve was unstuck and I was able to bleed the system, flow was enabled and it's braking again.
@@Cedo86 nice one mate 👍
Brilliant video. My daughters corsa is having breaking issues where only the drivers side front brake is working. Sounds like the abs pump to me. I'll remove it and test it as you've described. Many thanks.
good video. the code on the valve body is more important because the control modules can be changed.
Nice vidéo. Same problèm With my Suzuki wagon R (going on left side during strong braking) . I Put 1 used one and everything is ok now. Thank.
Brilliant
Great video, thanks mate
Thanks for this!
Nice vid mate 👌👍👌👍
Great video
Thanks for watching
Nice one brother I have the same problem with my abs took me some time to work it out ordered one from ebay pump full of crap opcom says return pump inactive
Good information 👌🇮🇳🇮🇳🇮🇳
Glad you found it informative..
I had this exact problem. I'm not mechanical at all so I took it to a garage who quoted me £792 to fix. It didn't feel right so I started looking around. Anyway I ended up buying a second hand part and got a mechanic to fit it. Less than 2 weeks later the second hand part is giving me the same issue 😟
Thankyou for breaking this down, at least I know whats going on.
You can send yours off to be reconditioned or buy a reconditioned part..they will come with s guarantee. But a lot more expensive..that's the chance you take with any secondhand part..you have just been unlucky.
@@BitsPieces thankyou so much for the reply! 😀 can you reccomend somewhere to get a reconditioned part from?
@@ryanodoherty4090 Just do a Google search and see what comes up..there maybe someone local to you .
I've solved this problem, first channel on the abs pump, more correctly valve, was stuck in closed position, front left wheel didn't brake. I heated the pump on oil radiator 😅 for an hour, sprayed valve opening with wd40, generously, and hit it with a hammer more than couple of times 😬 on that corner close to jamed valve, after that valve was unstuck and I was able to bleed the system, flow was restored and it's braking again. Also I used some hose from garage to blow air, with my lungs, in oil supply opening, there is two, air must go trough all four openings. You can try it without any fancy tools.
Also, disassemble, spray with WD and tap with a hammer. test that the valve works with a strong magnet. apparently it was clogged due to impurities in the brake fluid. 👍
Mine turned out be corroded wiring in the loop on passenger side and new sensor. Stressed that first diagnosis mechanic said it cost £800 to replace pump n labour. But took for 2nd diagnosis, plugged into a scanner and guys tested ohms (wheel speed?? Some other electrical terms 🤷🏽♀️) ...traced it to wiring and sensor.
£270 job.
What tool was used to remove the 4 star patterned bolts?
This video is really helpful thanks mate. Garage have just diagnosed this problem on my wife's 2013 model so Vauxhall obviously didn't change anything! Waiting for garage to give me a quote but if it's a lot I might have to sort it myself.
I've seen some people on forums suggesting second hand ones would need recoding or something to work.. is that something I need to worry about?
Just make sure you get one with the same numbers...
I’m having the same problem with my 2013 model, did you get a quote to fix in the end?
@@MyAnnonymous Sorry to tell you it was £980.. best of luck whatever you do with it mate.
Roz Edwards noooo 😱 was your wife’s car losing petrol like crazy?
@@MyAnnonymous Ooh no, not that we noticed... it was just dragging to one side as you hit the brakes. Sounds like it would be worth getting a garage to at least diagnose whatever's going on and quote for repairs then you know what you're dealing with 😓
Excellent video mate keep it up buddy
Will DW40 affect the abs pump if I try one I got in me garage ?
Hi..no..just give it a good shake to clear it out. The chambers are not that big, So will not hold a lot..plus bleeding the brakes will flush it out...But the test was just to show the blockage, you do not have to do it. If you definitely know it's faulty by one side not working then just go ahead and change the pump.
@@BitsPieces du sa
Were you getting an ABS warning light before you took this pump off.
No.. To test.. wedge down the foot brake, then jack up each individual wheel and see if it turns..if it turns when the break pedal is wedged down or pushed down, the it's faulty..on the rears, don't forget to take the handbrake off, so you can turn the wheels when testing.
@@BitsPieces Thanks . My pedal goes to the floor and I have replaced the master cylinder, the back wheel cylinders, the front calipers , new rubber brake lines. Pressure bled the system, while activating the pump ABS pump motor, swapped the ABS contol module with 2 used ones, But I didn't have the pressure bleeder or scanner then. I think you just told me my problem, because my right front caliper is not gripping the rotor enough to keep me from turning the wheel while a friend presses the brake.. I have no codes or warnings recorded, as I now have an autel scanner. Thanks again for the informative video.
LOL 😂 putting a single magnet on to make valve open.. you lost me chief!
Great video matey. When you say the car is pulling to one side. Is that just as you brake or when your driving say on the motorway?
It's only when you brake. That's because all the braking is only being done by one brake caliper on one side...if your car is pulling to one side generally, then that's probably down to a suspension/steering problem..like the tracking being out.
@@BitsPieces sir we have the symptoms..my left brakes front and rear were gone..upon checking no fluid coming out.it means sir that my abs is defective?i have no abs light in my dashboard.sir pls reply..
So an easy way to see if you have this problem is first try and bleed your brakes, if no fluid squirts out at pressure when brake is applyed then this is the fault. Is that correct?
Great video by the way.
Yeah spot on.
Great video thank you
Thanks
Hi before you took the old pump out did you have issues with the brake pedal being very hard?
Yes..if you think you are have the same problem..jack the car up one wheel at a time get somebody to press the brake peddle down(keep it down)and see if you can turn the road wheel by hand..if you can, than that's the side with the problem..
Brilliant mate just 1 thing probably a daft question but do you have to bleed the brakes after changing the pump
Hi..you.probably could if you can get to the conector..but I think it would be best to remove it anyway..you do not lose your radio code on this model..its all about making the job easier in the long run..plus you really should disconnect the battery anyway when unplugging any conections ..
Yeah you have to bleed the brakes
Good video bud, quick question .
My abs light comes on , only when at 58mph or more.
Any ideas ? .
Hi, could be a number of things..you need to plug it in to a code reader to see if it comes up with anything..you could do a visual manual check, take the road wheels off and check the ABS censor wires for breaks or wear, rust and so on..
Id say your tires are uneven
Good video. this as just happened to my mother in-laws car but drivers side brake won’t work will it be the same fault only noticed as I took it for mot test today
Hi..yes..this was the drivers side too on this car..
Bits & Pieces hi thanks for fast response cheers for that great demonstration on video I’m guessing theirs no uprated pump for this not to happen again
Not for the early models. I presume newer models would have been modified...if you get a reconditioned part, it will come with a guarantee..there was a recall regarding ABS problems and free repairs were carried out..might be worth a look to see if your car had a recall ..
Hi. Great video. Is it easy to install a spare yourself if you but a second hand unit?
Yeah, the one on this was a second hand replacement..just get one with the same codes. Or send yours away to be repaired..but a second one is the cheapest option
Thanks
@@BitsPieces there are 3 codes. All of them have to be exactly the same? Thank you
From what I remember, It's the main big code.. but if you can get all the codes to match up, then that's probably best .
Are these coded to the car or just plug and play ? Cheers good info in video
Best to get one with the same code ...
Wow, what a video, top banana mate. Heres a question for you, I have 2010 astra and randomly drivers side front wheel is smoking and the disc and alloy red hot as if brake is sticking on. I have changed pads and new discs and callipers are defo all free and working properly. This abs problem in your video, can it cause the brakes to stick on? Been to vauxhall and they agree nothing wrong with callipers etc.. and also thing it could be abs module. They still have car at minute investigating but I reckon they gonna say it is the module. After watching your 1st class video, if it it the module i might have ago meself rather than pay the £1000 I think they gonna quote me
Hi there. If you have changed everything then it probably will be down to the braking module...I have not really heard or had any experiences of this problem with it causing it to stick, but that does not mean the abs braking system is not at fault..come back and let us know what they find the problem is.
Bits & Pieces So got car back and Vauxhaull cannot find problem. They drove car over 100 mile and could not replicate our fault, albeit was raining all week so probably kept brakes cool. However got car back now and no further forward, apart from £99 lighter in pocket for a diagnostic that showed nothing. Will just see how it goes
@@stevemcclelland536 Thanks for the update.
Took my Corsa into the garage today to sort out a high pitched squealing sound coming from front o/s wheel - instead they came back to me to say I had the issue described in this vid and left my initial complaint undiagnosed.
Weird thing was that the ABS light both before and after remained off and I hadn’t actually noticed any swerving when using the brakes. Reckon it could have been a bit of BS due to it being such a common problem with lucrative results in garage?
They told me the car should be considered a breakdown until fixed, what would you say?
I good garage would easily diagnose this problem, The abs light does not show most times with this problem, If you are not confident in your mechanical skills to check for yourself, then a rolling road test will show up the fault, I.E like when you take your car for a MOT and they test the brakes, it would definitely show up then.
Same thing's happened to my nephew's car and the garage has diagnosed it when it went in for an MOT. The ABS light doesn't come on cos it's not an electrical/electronic failure so there's no way for the control unit to detect it. It's a physical fault in the valve.
Your video is a brilliant help! Just one question when replacing with the new pump how do you reach the nut at the back when putting it back on. Cant seem to get the spanner in
I do not understand your question sorry..you must have undone all the nuts to remove it...there is a rubber bush/grommet that hold the pump in place too..you just need to pull hard on the pump to pull it out..as in the video..thanks
A long angled ring spanner did the job for me.
Hi there, when we change the pump, do we need to bleed the ABS pump, or we just only bleed the brakes?
By bleeding the brakes. *all four corners.. you automatically bleed the ABS pump as you do it..
Hi ..Nice video , I have to replace this pump on an meriva b , do I need to code or will it be plug and play like you doing?
Hi.. get the code off the old pump and buy one with the same code and then you should be ok
@@BitsPieces thanks when you mean the code , are you saying same part number? because they match
@@soopastylin1932 yeah sorry..part code..
@@BitsPieces Thank you ... much appreciated
Hi , I wanted to ask you if the other unit of abs pump that I have to buy must have ALL the same numbers or just a part of it , and the same two letters (mine is "FC").
Thanks
Yes, best to match everything, you could try and swap the black electronic unit if you are struggling to get hold of one with the same numbers..it always usually a mechanical problem and not the electronics.
@@BitsPieces thank you
Hello, thanks for your video, wich number on the pump is exactly the part number.
And if i found one with the same motornumber is that als good or not?
All the number that are engraved on the pump..match them..under the 4 port holes...
@@BitsPieces thnx alot, hard to find the same part. So i sended it out for repair.
@@tjoesef494 At least you know it will be fixed and will work properly..
Do all the numbers need to match or just the top row as there is two rows of numbers and I’ve found a part that matches the top row but not the bottom row thanks in advance
Right on the spot! My corsa d from 2007 has the same damn thing, also the pessenger side. Until now i was still convinced the problem is the master cylinder the second piston that i think is stuck in the back of the cylinder and thats why i was thiking the abs unit doesnt get fluid pressure from the master cylinder. Can it still be the master cylinder?? I already checked the rest of the system except i havent opened the master and the abs.
Sounds like it definitely the ABS pump..its a very common problem. Vauxhall did do a call back to repair the problem for free.
To be sure just now I just bleeded the master cylinder opened the bolts a bit pump the brake stick with a piece of wood close it and repeat. Both bolts pressuring fluid out soo just left the abs I am sure now thanks very much for this video! Need to start looking for a second used abs
Also I was following the brake line from the pessenger and gues what, it comes out in the same port you had the problem on. Also mine has AQ on it and the the series are also the same except the bottom numbers
But in the video you say that the codes must to be exactly the same as the old right. But also you said they can be different but you need to use your old module? So lets say I order an AQ but all the other serie numbers dont match will it work if I use my own module on that?
@@basvandervegt7338 I said if you save the electronics (the black part) it might work..but the word to remember is might...just buy one with the same codes as yours then you know it will definitely work...
My lads corsa pulls to the left while braking hard and sort of skids before stopping.its ok when braking steady and drives in a straight line.a mechanic check the servo and master cylinder they are ok..so he seem to think it's the abs pump
Jack the front of the car up so both front wheels are off the ground. Get someone to press the brake pedal, keep it pressed down and see if you can turn any of the front wheels, if you can turn one side then that is your problem brake. Try the same thing on the back wheels..if it's an ABS problem it's ussally only on one wheel/brake. Bad tracking can also cause a car to pull to one side on braking too.
Hi I have Mariva 2011 when i press brake it feels like car push forward at low speed from rear brakes anyone have this problem with car please tell me what it coud be ABS or brake callipers.
My brake pedal is spongy & squeaks after I changed my ABS. Does this go away or has the garage not done it properly?
Hi, its very difficult to give advice without being able to view the car myself, if you are worried, take it back to the place that did the work and asked them to check it again
Hi, I just have to connect it with the plug or do I have to change the management box with the original one?
If you get a new pump with the same code as your old one it will work fine with no need to re-program the cars computer.
Can I take the case of the old block and put it on the replacement one (used)
I have never tried it..but I do suggest it might work in the video, because the car computer will still think its th same one..All I can suggest is you try it.
Do I need a block with the right numbers on or does that matter a lot. I have changed mine abs block and its full of warning light now and a mate tells me it needs to be coded og a block with same model number as the old one. Mine is a Opel corsa D model
You.needed a unit with the same numbers .. Try changing the electronics from you old unit on to.your replacement
@@BitsPieces done , i used the old Electronic and the New bottom, now All works properly
same model which has the same problem in my tool I would appreciate if you can help with the solution
Hi..all the info is in the video
@@BitsPieces
Are the brakes fully improved?my vehicle brakes to the right when I press
@@onurmengi1982 Yes..if it's the ABS pump that is the problem..changing the pump will fix it..I suggest you take it to a mechanic to get a proper diagnosis.
remove the motor add the valve body to the nightly dishwasher and lightly tap the body of the ABS block to PERSUADE the stuck valve to release .. once the valve assembly is functioning as it should flush the passageways and valves with new brake fluid .
will this work?
Please show how did you bleed the abs pump and the whole line
Hi, there are videos on CZcams showing how to bleed brakes..thanks
@@BitsPieces thanks for reply.. however i wish to see how you did. Or i guess maybe you haven't did the bleeding after the pump has been change. Does it require to bleed the pump once it being changed? Hope for your guidance n tips.
@@shahrulhishammohammed4546 You just bleed the brakes the normal way..I can not show you this was a couple of years ago
do you have to bleed the breaks in order for it to work? I know it’s been 4 years but maybe someone knows?
Yes..bleed the system..
Hello friend, i have the same issue, the front wheel dont break, but dont have error lights abs on the panel. Its possible? Obrigado
Yes, sounds like ABS pump..it's very common
@@BitsPieces thank you, great video!
How do you bleed the abs module? Is it same as bleeding all the brakes?
Yes..just bleed you brakes the normal way..starting from the the bleed nipple furthest away from the brake fluid Reservoir..so that will be driver's side rear, then passenger side rear, then drivers side front then passenger side front..(UK) models..
@@BitsPieces Thank you very much for responding back. Your information is useful to me😊👍
Any recommendations for a reconditioning company?
I would just do a Google search and see what comes up..there may be a place local to you.
I can recommend control units in Cullompton
Hi my mechanics sent my one off for reconditioning but when it got back the rear brakes didn’t pump any fluid and front started working again. Is that even possible or is he tryna scam me?
I would take it back to them to fix the fault.
Do you have to bleed the the clutch as well if it’s a hydraulic clutch?
If it uses the same brake fluid reservoir, then probably yes..
@@BitsPieces Thanks for the vid got it done in couple of hours today was also painless didn’t end up bleeding the clutch but all was okay 👍🏻
@@BitsPieces Not bad for £50 fix 😂
@@thailandhighlife8170 Brilliant..always worth giving things a go..it can save you a fortune..
i have same problems and i can change my car abs module now abs warnings light blinking in instruments cluster. what i do ? help me(vw polo)
Did you replace ot with the same model code... disconnected the battery for five minutes and reconnect it and see if that clears the flashing light..if not you may need to have it plugged into a OBD socket to read the fault codes..ots very difficult to give you advice without me being with the car.
@@BitsPieces I change abs module sir but now flashing abs light how to fix it I have polo 1.2tdi 2011 highline car
Thanks for very helpful advice sir
Hello there!! I got an opel corsa 2007 1.2 when i stop the car using brakes and then start it back up and try to drive away the breaks lock without me doing anything but if i stop the car using the handbreak and then start ut back up the car works normally...whats the issue here? (Sorry for the bad english i hope u understood what am i talking about)
Its like ABS lock-release, lock-release for a couple of times and then drives normally
Sounds like it could be sticking caliper or handbrake mechanism/cable sticking
@@BitsPieces oh thanks for the quick answer man! Appreciate it! I took it to a "mechanic" the other day amd he was like "oh you need to buy a new abs pump (or whatever its called)"
He didnt check it or anything just from what i told him he made that conclusion
I would take it to another Mechanic to look at, for a second opinion..Its not really easy for me to tell you what the problem is without actually looking at the car...But the ABS pump is a common problem on these.
Hi. Ive changed my pump. Everything is fine but the abs light and brake light have came on and stayed on, is there a way to get them off. Ta
There may be a fault and that's why they are on..it the brake fluid at the correct level they may cause the brake light to come on...did youn get a pump with the same codes..you may need to be code read via the OBD port to see what it's saying is at fault ..
Bits & Pieces hi, looking a bit further into it it looks like it needs recoded, read on a site somewhere you can change the black piece over from old one to sort it out?!?!?!?
@@upyourarse1 If you used one with the same unit codes it should work. I do explain this in the video.. and I do point out if worst comes to the worst you can swap over the black control unit on the pump (in video) thanks
Bits & Pieces bloody hell, didnt even notice!! Cheers, best watch it all again
Hi again, probs being thick now...took black brains off original pump and just quickly plugged in wiring, car wouldnt start, was a long shot but do i take it it all has to be fully changed over to work, cheers....also while im here do you have any videos on how to turn airbag light off, one on centre console flashing and one on dash, cheers
Is there any specialist to unclog the abs valve?
If you.search the internet. You will find specialist that recondition the pumps
Controlunits in Cullompton he did my mazda 2
@@chucky2316 where is that?
@@alvinscorner Devon he fixed my mazda in 2 hours for 280 quid 😁. If you Google control units Cullompton his details should come up
Hello. I replaced the abs block and noticed 2 brake pipes are wrong. Can something serious happen if I do not mount them properly? Thank you.
If you know they are the wrong way around..just put them the right way.
I noticed no lights on the board and I guess it's ok.
My 2010 sri corsa d brake pedal went to the floor slowly one day, pumped the pedal and brakes worked fine for 2wks, it's been on a rolling road,all 4 brakes are fine and no leaks, could it be the abs pump or master cylinder at fault?
Surely, the garage that did the testing would have advised you of the possible problems
@@BitsPieces they said change abs module first and then change master cylinder and if that doesn't solve the problem change the servo
Is the problem still there..
@@BitsPieces yes, brakes are fine for a couple of weeks then the same thing happens, could it be the master cylinder??
I don't think it would be the ABS pump...have you rear drums or discs
My sons just showed up on MOT failure so wanted to check what’s required. I hope I can get them to provide a reconditioned one and not rip me off £500 for a new new one. Fuming. Vauxhall really are shite cars.
You said start bleeding from the wheel farthest from master cylinder. I think its not correct should start with the wheel fartest from abs pump
Same thing