How to Program Key Fobs on a 13-15 Ford Police Interceptor Utility (PIU)
Vložit
- čas přidán 25. 07. 2023
- The Ford Police Interceptor Utility is often not equipped with PATS so there is no RFID reader to identify the key fob. This allows you to use blade-only keys. Because of this it requires a unique sequence to enter program mode to program the key fobs. In this video I use both an OEM key fob along with some Chinese knock offs. Both worked just fine.
Here are the keys I used, Use at your own risk as these knock off keys are known to sometimes not work. I have used several pairs and never had an issue personally. www.amazon.com/dp/B09GFWNRGP
If my content has helped you with your project and you would like to say thanks, you can donate on Patreon. If you would like to contact me directly with questions regarding your project you can message me directly on Patreon as well.
patreon.com/depolicify?...
Can you post video where to buy PATS or forscan and turn off dark mode. Show us in video how to do it
Yep when it honk like that or multiple times is cause you left a trunk or hood open that’s how my old cilvilan explorer was aka my sport now I have a Police Interceptor trying do everything like a sport had
Thank a lot for these informative videos, how did you cut the Chinese keys to work in the ignition switch (aka to insert them into ignition switch to start the car)?
When you buy the keys they come as uncut blanks, You have to go to a locksmith or a key cutter kiosk in a store. It's usually pretty cheap. less than $10 per key. A lot of kiosks only let you use their keys but I convinced one to let me use mine. Know that if the Chinese key fobs don't work that a locksmith won't warranty the key.
My 2013 has the where the headlight and tailgiht come on it’s a police interceptor believe the dept did it like that
Do you know how to make the horn and lights flash when you lock the car. Mine only turns the headlights on.
Works for everything but hatch door will only unlock with key. Is there setting I need to change?
How do I disable dark car mode for my 15’ Police Interceptor?
I called the dealer , gave them my Vin # and they said my 2013 was ordered without the module for Remotes to open and close the doors. Is there a way I can confirm that? I tryed to program the remotes both ways nothing happened.
Do you have any kits or videos for 2021-2022 explorer PIUs ?
Great video series, I have a 2015 fpiu. When I try this method it doesn’t work. After the 8x ignition sequence, the vehicle doesn’t go into programming mode. Any suggestions? Thank you
Dark car mode is probably still enabled. Disable it in forescan
Had the same issue. Disable dark mode and enable remote keyless entry. And if it still doesn't work, try unlock lock unlock instead of lock unlock lock unlock.
Mine is a 2015 and it didn’t come with the keyless entry module so you happen to know where yours are located so I can take them out of a wrecked car and also look and see if mine did get installed after the factory
Does anyone here happen to know where the keyless entry module is on a 2015 mine was ordered without key fobs and the dealer shows that I don’t have the module but I want to look for myself and then be able to install one I’ve taken off of a parts car
2013-2015 will work with the 8 ignition cycle programming. On 2016-2019, you will need IDS or FORScan to program fobs. You can get remote start by adding a hood switch on 2013-2015. The receiver on the Interceptors do suck, you have to get really close to get the remote to work, half the time it doesn't.
What about for 2020? 🤔 - I got forscan assuming it would work but I don’t see keyfob modules.
@@dramonxfan6431 2020+ should be same procedure. Enable keyless entry and the programming mode will be in BdyCM on the module list called "RF Keypad Learning by 48-char TIC code". FORScan may not have it on the 2020+ vehicles yet, you may need FDRS or IDS to program the fob if it isn't there. Dealer key fob is required for 2016 onward (Part GB5Z-15K601-C). DO NOT open the package until programming is complete (remote is not returnable once opened). The code will be on the package for the remote to input.
@FruztalProjects would this program process with forSCAN work for the "Made in China " keys from Amazon? On 2016 to 2019?
@@TheThe7542455941 No it must be dealer part for 2016 and newer.
On my 2014, it would not go into program mode
I have a 2013 FPIU just like yours. Do they all come with keyless entry, how can I tell if mine has it? I watched and installed a center console from one of your other videos and I found the module you said might be keyless entry
I'm not 100% sure how to tell if yours has it. It may have a plug in the door where the Bpillar touch code panel would plug in. The module is also used for TPMS so in some cases it could be exclusively for that.
@@depolicifyAll Police Interceptor Utility vehicles have it. You will have to enable it in BdyCM in FORScan. It's not like the old pre-2006 Crown Vics where it'd actually be missing the hardware. It has it, it's just disabled via software.
Hey man, really like your content, keep up the great work. I’m having an issue where i am getting my car to go into program mode for the key fob but when i click a button on the fob, nothing happens. i changed out the battery of the key fob and same result, nothing happens. not sure what’s causing this. Any suggestions? I would really appreciate the response.
I can confirm that this method definitely does *not* work on a 2017 FPIU. I believe that the 2016-2018 FPIU are the same. There is no end user programming mode, the only way is to enter a 48 character string which can be found on a sticker inside the key fob (OEM ones only) directly into the BCM. Aftermarket ones do not have that string of numbers.
Up until very recently this could only be done with IDS, but FORScan added it as a feature on a recent update.
I saw that you mentioned dark car mode, so I even tried to disable dark/silent car mode with FORScan in both the BCM and IPM and it still didn't work. You also need to enable RKE in the BCM or else even IDS or FORScan can not program fobs for my year.
OEM fobs which will work on the 2017 are GB5Z-15K601-A (unlock/lock/panic) and GB5Z-15K601-C (unlock/lock/trunk). All features on those fobs will work when programmed properly. When I first bought my FPIU about two years ago FORScan did not have the programming feature so I enabled RKE then took them to a dealer to program. I was trying to program a third (aftermarket so I can't use the 48 character string) with your method, but it doesn't honk and go into "programming mode".
Also, your car was locking all of those times that you tested it. Those running lights come on when it unlocks remotely and go back off when it locks remotely. It honks when you push lock twice (i.e. it was already locked when you push lock). As for the hatchback releasing, try holding the button down for 3-5 seconds. I don't need to on mine, but I've heard some reports that it needs to be held down. You also won't hear the hatchback unlocking *at all*, it's super quiet, you have to use your hand to open the latch to verify that it was unlocked. Just to be clear, the hatchback does not actually pop open when you unlock it with the fob. It only unlocks, and is pretty much silent when it unlocks. There might be a setting in FORScan to get it to pop open (I know that it pops open when I run a self-test on the BCM, but it only opens an inch or two and doesn't seem to have the hardware for power assist to open all the way).
My vehicle does *not* have PATS so that is unrelated. I have programming/diagnostic tools that will program IMMO and fobs (Autel KM100 and Autel MX808S-TS) and even those can not program fobs for my FPIU. The 48 character string is the only way.
Another update.. While playing with FORScan I changed the trunk function to "power liftgate" or something to that effect instead of "unlock" to see what would happen. The fob would not open OR unlock the rear hatchback when I did that. Might be worth looking into if yours still won't unlock with the fob.
Wish I read the comments before ordering the knock offs and trying it on my 2017 interceptor even ford couldn’t do anything they tried
Do I need forscan to program the oem keyless fob On 2017 interceptor?
Will an OEM ford explorer flip key be compatible with a 2017 PIU?
worked with forscan except the trunk pop button any help?
I have been looking into this as well. I will release a video if I figure it out.
Does your trunk pop button work? All my buttons work except that one?
Not yet, trying to figure out a solution.
Hi! I have a 2013 police interceptor utility. I am following this process, but dont hear the click of the doors locking when I am done. Am i doing something wrong?
Have you disabled darkcar mode first in forscan?
@@depolicify you know what, I just tried that and I heard the click this time! However I got the wrong fob I think because it’s not doing anything. Do you happen to know of a cheap fob that would work for these cars? Thanks!
Also trying to find a fob compatible with remote start
no mattr what i do it doesnt enter program mode and when i try and use forscan it telling me my car isnt registering to turn it on but i done this already i dont know what to do im going to return this adapter then buy another 1 maybe its that but its saying its working he car isnt reading idk im lost
the forscan license it locked to your obdII cable
I ONLY HAVE THE KEY DO I NEED A PROGRAMED KEY FOB LIKE THE SMART ONE U HAVE IN ORDER TO PROGRAM THE 2 AFTERMARKET ONES FOR $25 OR I HAVE TO GET THE SMART KEY FOB THEN PROGRAM IT?
SORRY I MEANT TO ADD I HAVE A 2013 FORD ILL BE BUYING THE KEYS TODAY THE AFTERMAKET FOBS SINCE I READ ITS WORKS WITH THE 2013 MODELS SOMTHING ABOUT PATS. I SHOULD BE ABLE TO USE THE AFTERMARKET KEY KEY FOB? DO I NEED 2 OF THEM TO PROGRAM VIA FORSCAN
YOU DONT NEED ANY PROGRAMMED KEYS TO PROGRAM NEW KEYS
I tryed this method with my 2013 fpiu and it didn’t go in to program mode
Try disabling dark car in forscan then try again.
Did not work for my 2016 ford explorer police interceptor I’m guessing not all has that code.
As the title states, this is for 13-15
Hey! I tried this method, I got it into program mode, but my key won’t connect to the car
Verify you have a working battery, and that you got the correct key for that model. Not all key fobs are on the same frequency.
I know I have the same frequency, and I’m pretty sure the battery is still good. Any other ideas? Thanks!
Run down to an auto parts store and try it on their key fob tester to see if it is transmitting. @@ThatHondaActy
Any idea to fix the range of the remote?
I have a video coming out soon for that
@@depolicify can't wait!
My interceptor won’t go into programming mode after cycling it
My 2015 won’t got into key programming mode either with this method. Is there another method?
I can't get in program mode 2015 interceptor utility
You may have PATS. If so then use the same method as for a regular ford Explorer
@@depolicify i had went on amazon and typed in ford pats. A obd came up elm327 i believe basically a obd with a usb cable. I downloaded forscan free 2 month trail. Got into the vehicle bcm and disabled dark mode and turn on remote unlock. Wala it worked. I was able to put the vehicle in program mode by taking it out of dark mode.. thanks for help. Question since you changed everything out. Would a ford screen from a regular explorer work in the police units?
@@dallasgreensmoke Good to know. My understanding is that if your car has sync already installed then you can upgrade to another sync system with a different screen. If you are like me without sync then you are limited to only installing an aftermarket radio, and there's not many options out there.
@@depolicify ok yea i thought so. Another question. Have you upgraded to led or hid lights.
@@dallasgreensmokehow do you use that. Can you post video or share steps what to do it
I tried it it doesn’t work for my pui
Can u please help with this??
@Arshak200 We just bought a like-new, used, 2020 Ford Interceptor Utility Hybrid SUV and it came with the standard key (no PATS chip in the key). I tried to get a keyless remote for door lock/unlock and the Ford dealership looked up the VIN # and found out ours didn't include the "keyless entry" option. So it doesn't have the wiring/technology/hardware to use a keyfob. I just tried this 2nd trick and it didn't work on our unit either. Though it could be because it's a different sequence to get into "program mode", maybe?
Battenburg USA Emergency Vehicles, Massachusetts
@@Arshak200 What year is yours? Please see my comment that I just posted, I'll place it here for you as well....
I can confirm that this method definitely does not work on a 2017 FPIU. I believe that the 2016-2018 FPIU are the same. There is no end user programming mode, the only way is to enter a 48 character string which can be found on a sticker inside the key fob (OEM ones only) directly into the BCM. Aftermarket ones do not have that string of numbers.
Up until very recently this could only be done with IDS, but FORScan added it as a feature on a recent update.
I saw that you mentioned dark car mode, so I even tried to disable dark/silent car mode with FORScan in both the BCM and IPM and it still didn't work. You also need to enable RKE in the BCM or else even IDS or FORScan can not program fobs for my year.
OEM fobs which will work on the 2017 are GB5Z-15K601-A (unlock/lock/panic) and GB5Z-15K601-C (unlock/lock/trunk). All features on those fobs will work when programmed properly. When I first bought my FPIU about two years ago FORScan did not have the programming feature so I enabled RKE then took them to a dealer to program. I was trying to program a third (aftermarket so I can't use the 48 character string) with your method, but it doesn't honk and go into "programming mode".
Also, your car was locking all of those times that you tested it. Those running lights come on when it unlocks remotely and go back off when it locks remotely. It honks when you push lock twice (i.e. it was already locked when you push lock). As for the hatchback releasing, try holding the button down for 3-5 seconds. I don't need to on mine, but I've heard some reports that it needs to be held down. You also won't hear the hatchback unlocking *at all*, it's super quiet, you have to use your hand to open the latch to verify that it was unlocked.
My vehicle does not have PATS so that is unrelated. I have programming/diagnostic tools that will program IMMO and fobs (Autel KM100 and Autel MX808S-TS) and even those can not program fobs for my FPIU. The 48 character string is the only way.
I just tried this method on my 2014 piu and it didn’t work
Mine 2014 didn’t work either and it won’t connect through FORScan either, the code reader does connects through my phone but it won’t connect to my laptop FORScan app