How to install Traxxas Defender TRX-4 Pro Scale Advanced Light Control System (
Vložit
- čas přidán 1. 07. 2022
- How to install Traxxas Defender TRX-4 Pro Scale Advanced Light Control System (#6591) #98
#deralterego
●Vergeet zeker niet te abonneren! / deralterego
Like en comment!!
- Mijn naam is Pascal en mijn vrouw heet Martine, en ik upload elke zaterdag een nieuwe vlog om 10:00 uur!
✔ Meer van mij zien? Volg me op:
➤Instagram: / beuzy22
➤Mix: mix.com/deralteregobeuzy
➤Blog: deralterego.blogspot.com/
➤Pinterest: / deralterego
➤Reddit: / der_alterego
➤Tiktok: www.tiktok.com/@beuzy?lang=nl
➤Facebook: / deralterego
➤LinkedIn: / beuselinc. .
●Deze video bevat geen betaalde samenwerking(en).
●Deze video bevat geen (gratis) gekregen producten en/of diensten.
●Deze video bevat geen gekochte producten en/of diensten met korting.
➤Mocht er wel een betaalde samenwerking(en), gekregen producten en/of diensten, gekochte producten en/of diensten in de video voor komen dan wordt dit altijd aangegeven in de videobeschrijving.
♫ Muziek ♫
Intro song is from Morillo the makers anthem and is copyright free!
The one from miroslava is called every day and sounds different!!!
The song from miroslava is dated 2021 how is it possible I used this song
first then already in 2020?? Cause it’s the copyright free one from morillo!!!
All other music is copyright free and coming from youtube library of music.
If other will be mentioned here also.
➤Dit is wekelijkse vlog nummer: #98
How to install Traxxas Defender TRX-4 Pro Scale Advanced Light Control System (#6591) #98
Description:
This is Traxxas Pro Scale Advanced Lighting Control System w/ Power Module. Traxxas LED lighting sets the standard for adventure after dark with authentic shadow-chasing brightness on the trail. Now, Traxxas LED lighting is even more realistic with the new Pro Scale Advanced Lighting Control System. The Pro Scale system puts you in command of high- and low-beam headlights; turn signals; brake lights; reverse lights; and even hazard signals for the ultimate in scale off-roading.
All the lighting control of a full-scale truck is at your fingertips. Turn the headlights on and off, and select high or low beams. Signal for turns, with automatic cancellation. The brake lights glow when you slow or stop. Hit reverse, and backup lights glow automatically. The Pro Scale system makes it easy.
The Power Module puts you in control. In Daytime Mode, the headlights and taillights are off. As the sun sets, choose Low Mode to activate the tail lights and low-beam headlights. High Mode turns on the high beams for trail-blasting brightness. In all modes, the brake and reverse lights operate automatically.
Traxxas Link and the optional Wireless Module make it easy to configure your lights your way, right from your iOS or Android device. Switch individual lights on and off, assign lights to each mode setting, and add additional LED accessories to the Lighting Power Module with just a touch. You’re in control. - Auta a dopravní prostředky
Why you connected both the blue wires? I did all you did and my light dont come on.
Nice info thanks
No prob sir
Great tutorial man. Thx
Merci
❤❤❤
Thx
Why don't use the other communication cable?
Very nice man!
Thx for the comment.
Mooi.
Thx pa
My signal lights are not working. What did you do to get yours to work? I figured it out thank's and great video.
I used the app to activate them, without the app you have to press the button on the light box. There are different settings one of them is the correct one to activate the signal lights with the remote
Very awesome!
Thx man.
Thx m8
Hello! Nice work and very neat! Congratulations! May I ask one question - how you managed to make the turn signals work? What was the issue in your case? Thanks a lot!
I had them wrong connected in the distribution box, the one taped tonyhe body 🙈🙈 once connected like shown in the video in last part then they worked fine.
@@DerAlterego Thanks, man! I’ll try to check tomorrow, what’s wrong.
It was much more prosaic :) I’ve had everything connected correctly, but didn’t quickly press twice the Signal button on the power panel, in order to activate turn signals. :) Now it is working completely fine.
Just a side note, the instruction says when using the Maxx cable, the RX one should not be used. Just one cable at a time. But maybe I’m missing something… again. :) Anyway, thanks for your help and good luck!
@@Vova8401 im having the same problem everything connecter right but still not blinking i have the maxx wire connected as well !
@@rcjoy5362 on the power module, which is mounted on the cars chassis and where the “maxx in” socket is, there are two buttons - “mode” and “signal”. Press the “signal” button quickly two times and the confirmation blinking will happen. Then when the car is stand still and you turn the steering right or left, the relevant blinker should start working. Really hope this will help you! In my case this is installed on a Defender. If you have another model, check one more time, that you used correct slots. I did so, but in my case the solution was just a two-time button press away. :)
How where you able to get the blinkers to work I can’t get mine to work for some reason I got them to work once yesterday and they haven’t worked since
To switch on the turn signals, just turn in the direction you wish to signal while stopped. The signal will self-cancel once you’re underway.
@@DerAlterego That’s what I was doing and they where not coming on but they work because they flash when you turn them on and off via the signal button on the power module
Good work.. my problem is that rock lights are always on. They are in N position like manual suggest . How can I solve it? I would like rock light work with high beam headlights
thx. I’m also looking for a solution, maybe remote controlled switch on the rocklights. But still not found a solution for that. If i find a system I sure film it.
I have just spoken with Traxxas support… there’s no way to turn off rock lights.. they are always on even with pro scale kit. The only way is unplugged them!
@@Vi5889 yeah I know but saw someone here at the club using a switch on the car that made it possible to switch those lights of that way instead of disconnecting constantly by plug that eventually gives some tear and wear to the cable or connector. He just had a manual switch between the connection and the rock lights.
I have the Advanced Pro kit and I’m able to operate the rock lights using the app and Bluetooth module. I have the rock lights plugged into auxiliary port number 2 and the low auxiliary switch in the app controls it. Hope that helped you guys.
ik ben een beetje laat maar kan deze kit ook op een rustler 4x4?, ik heb traxxas link systeem en 2 light bars en ook een rode light bar. ik heb een 6s brushless motor/esc, ik zag dat je de kit aan de motor deed, als ik dat niet doe wat werkt dan niet?
Mooie video, ga zo door!
De kit is bedoelt voor de trx4 dus denk niet dat die zal passen op de rustler. Daarvoor zal je een eigen set wel hebben. De motor is voor achteruit rij licht.
How do you make it blinking and flashing ?
Well if you connected everything correct and you drive backwards the backup lights work automatic, also blinkers. When turning the blinking starts.
Dag pascal.
Dag ma
@@DerAlterego Awwwwww :)