You tighten the Handle bars yourself and they have blue bar at the bottom that means you have to make sure you don’t thread knot them or they will become loose
@@RareGamingX he said water RESISTANT. not waterproof, they are rated to ride in rain, not drive through water and most phones are rated to 1.5m submerged for 30 minutes
I put 6 mill bolts through my handle bar I used a 6 mil tapper to drill a hole to 6 mil then put the through and tightened it with a socket head nerve loose since
I gotta say that the battery is below standard. The compartment to replace the battery is easily accessible. You can put in an aftermarket battery so long as it fits, and you connect it correctly and seal it all back up... or you can DIY your own graphene battery with some charcoal for the graphene(look up flash graphene) cathode and lithium anode like I did. Although there are other batteries out there, you can make lithium-sulfur, etc... or you can just buy a bunch of Samsung batteries and run them in parallel(soldering or spot welding required for this)... of course, if you change the battery, you're ultimately responsible for providing waterproof features for the battery you've installed. I haven't had an issue with mine(even before the custom battery replacement). Don't forget to get an altimeter and rate your batteries current and voltage before installing it(to be sure it's nearly identical to the factory standard and you dont short circuit anything). As far as the wobbling on the handlebars, I would legit just grab some duck tape and super glue, then just put a custom drawing on it to make it look tight or sticker bomb the bitch.... or you can always just spend your hard earned money on a better one instead of studying the physics of electricity because you'd rather be lazy and dumb... but whatever you choose, it's your life and your ride.... have fun, be smart, and be safe! :)
Had myne 4 years no problems if u treat it like u stole it then it’s gona f up ride it like nice no water no but bumps and u will be sweet it’s usually a loose wire or screw upgrade
Need help, my scooter aovo pro m365 suddenly it turns off and it's hard to turn it back on also i fell when the speed drops suddenly when im running and them turning off
I have one exactly the same and I had mine for 2 years and I had no problems and even though it’s waterproof but I don’t think that the person who invited this meant soked!!!
That’s why soon as you get the scooter and tighten the screws. You need to put electrical tape around it so it never goes lose from beginning. It will solve the problem forever trust me
You tighten the Handle bars yourself and they have blue bar at the bottom that means you have to make sure you don’t thread knot them or they will become loose
rule number 1, dont drive when its wet outside please.
They’re water resistant bud
@@iliasfagnani8641 yea right, look inside it, nothing in this thing is water tight. Not even ur (Waterproof) phone.
@@RareGamingX they are branded water brood if they weren’t the company would lose loads of money so they are water proof
@@hmoss for sure, do you’re thing, is it broke don’t send them an email, (it broke because of water damage) just buy an new one instead ..
@@RareGamingX he said water RESISTANT. not waterproof, they are rated to ride in rain, not drive through water and most phones are rated to 1.5m submerged for 30 minutes
I have an aovopro esmax, will be reviewing it soon, but the short version is that you should save up and buy something better...
I put 6 mill bolts through my handle bar I used a 6 mil tapper to drill a hole to 6 mil then put the through and tightened it with a socket head nerve loose since
I gotta say that the battery is below standard. The compartment to replace the battery is easily accessible. You can put in an aftermarket battery so long as it fits, and you connect it correctly and seal it all back up... or you can DIY your own graphene battery with some charcoal for the graphene(look up flash graphene) cathode and lithium anode like I did. Although there are other batteries out there, you can make lithium-sulfur, etc... or you can just buy a bunch of Samsung batteries and run them in parallel(soldering or spot welding required for this)... of course, if you change the battery, you're ultimately responsible for providing waterproof features for the battery you've installed. I haven't had an issue with mine(even before the custom battery replacement). Don't forget to get an altimeter and rate your batteries current and voltage before installing it(to be sure it's nearly identical to the factory standard and you dont short circuit anything). As far as the wobbling on the handlebars, I would legit just grab some duck tape and super glue, then just put a custom drawing on it to make it look tight or sticker bomb the bitch.... or you can always just spend your hard earned money on a better one instead of studying the physics of electricity because you'd rather be lazy and dumb... but whatever you choose, it's your life and your ride.... have fun, be smart, and be safe! :)
Had myne 4 years no problems if u treat it like u stole it then it’s gona f up ride it like nice no water no but bumps and u will be sweet it’s usually a loose wire or screw upgrade
Just ordered mine well be here Friday want about lil water after making sure ever bolt is tightened the correct way
i had a question how often do you have to charge it? on the manual it says once every 3 months but it dosent seem right please let me know.
Thank you for that info,only had mine 3 weeks but treat it like a babe as I want it to last…
Any other tips plz on maintaining it? Thanks in advance
Recommend installing suspension on it i had mine done by a nearby scooter shop for like 120 euro very good upgrade@@noonankevin1
The thing is when driving on wet surfaces all rules apply even to motorcycles that you have to be very cautious about turns and slippery surfaces
Wish I knew this other night hahahaha
I have like 357 miles on mine been in a lot of weather no problems, I did rewire my board tho after a failed to charge.
can you make a rewiring tutorial and do you recomend buying the m365
I have the same problem the thing just cut out on me one day and now the thing does not hold a charge tried changing the battery the thing is a joke
I got one and it got fucked up after 4 months
How did you break it?
How long did you guys have this scooter?
Mine has lasted over a year so far got it on 2022 Christmas
I don't take mine out in the rain an I'm having the same issue with the battery 🤔
Didn’t even have mines a month and the front tire or motor is making a clanking sound and just normal use, I’d skip on this brand
Mine shows 3 bars and literally 7 mins after the scooter dies. Also never go uphill on 3 bars it drains the battery the scooter is fked🤦🏽🤦🏽
Need help, my scooter aovo pro m365 suddenly it turns off and it's hard to turn it back on also i fell when the speed drops suddenly when im running and them turning off
I have one exactly the same and I had mine for 2 years and I had no problems and even though it’s waterproof but I don’t think that the person who invited this meant soked!!!
why in the rain..
which website did u order it of of?
Handlebars are definitely not good, literally broke off while ridin and I fell and cracked the pole in two
Always tighten them, mine become loose so i just tighten them it's good to check all the time or every now and then if the screws or bolts are loose
It’s been a year since I bought mine and it’s been great so far, regular maintenance
That’s why soon as you get the scooter and tighten the screws. You need to put electrical tape around it so it never goes lose from beginning. It will solve the problem forever trust me
@@TWillTooReal1tighten where? I have one but what do you mean. Plus put electrical tape? How does that keep it tight?
@@ghazibelaljalal6933 vibration over time will loosen those screws. Putting tape over the top of the screws makes sense.
Hmm maybe it has something to do with the scooters being drenched in water
😂😂😂
Sorry bro they sent u a faulty 1 they also give u used ones i own the same one and mine buttons turns
my power button turns too its annoying
How did you giys correct the turns button??
I have the same scooter I think the charging port might be faulty
How long have you had them?
J’ai un problème aussi, je ne peut pas avancer comme si qu’il y avais une sécurité c’est normal ?
Faut aller sur l'application aovo et enlever l'option
What a terrible video…
Aovo are crap
What’s the red bars on the display?