Comparing different laser machines: cleaning speed
Vložit
- čas přidán 27. 07. 2020
- P-Laser has a wide range of laser cleaning machines. In this video, we compare the cleaning speed of a Low Power, Mid Power and High Power laser. Note: this demo was done manually. When automated, the test will give a more accurate result for the speed of different machine types.
Find out more at www.p-laser.com/ - Věda a technologie
God I know they're like tens of thousands of USD and really made for industrial purposes but I WANT ONE
I couldn't have said it better!
They'll come down in price soon enough.
More than that......these advanced type ones cost $500K-1 million. You can get a cheap one that barely works for $80K. They will not be coming down in price anytime soon. Maybe 20 years.
The QF-1000 is most likely $800-900 billion dollars.
@@GreatDayDnB We are talking per vehicle, not per contract total.
For those that are wondering about the price. You can't afford it.🤣
Even the smallest ones are in the 10s of thousands. The bigger ones are in the 100k plus range and some as much as 500k.
Incredible machines, I can't wait till they come down to something a smaller buissness might be able to afford, something that has some power so it is ussuable for stripping a car or something. Because as it stands the small one is amazing at smaller projects it's just not practical for larger ones.
Can validate - was looking to start a laser cleaning business. 2000w unit $640,000
@@produKtNZ They are incredible machines. But as a previous business owner of construction and cabinet shop. I cannot see the value it compared to traditional methods.
Only way I see this being viable is if you land a niche job where other methods either don't work or very impractical.
But trying to compete in areas like say sandblasting cars, forget it. Customer doesn't care how you strip their cars as long as it is stripped and trying to pay off a 640k machine doing that. Good luck, you will have to be working a second job to make ends meet.
You don't want to be only working for your tools for the next 30 years. That is the same cost for a very nice house even in my state!
@Oracladeus You're preaching to the quite buddy. I already know that it is only viable in niche markets.
Will these product remove burnt eggs off a non stick or just metals
do you have some specific data about the productivity per minute for square meter? Thanks
Can you please try it on wasps?
any wider than QF 1000 ? or need to customs ?
Do you offer this kind of job in France ?
Can we buy these machines on Amazon?
the result of the 100w its not impressive because the surface still has many stains. Does this mean that needs even more time for the perfect clear result of 1000w? Or it is not capable for such result?
You need higher watts
I wonder how reliable these machines are due to their cost of them and what is the lifespan of the laser.
Aren’t the lasers supposed to be good for 50,000+ hrs? Which is like 26 working years
Would I be right in thinking you get the same results(quality of clean) with either machine, just the larger ones are quicker?
Indeed, more power - more speed. However, based on the application, a different type of laser machines might be needed. Systems with lower power produce a high-density beam. This is an aggressive type of beam, used for coatings that are difficult to remove, like rust and thin layers of paint. High-power systems produce a low-density beam. This is a softer type of beam, and it is used in situations where avoiding damage to the substrate is paramount.
Precio please!
Any web address to link in .. interested here 😉
Where to buy one of those?
@ aha
You can remove graffiti with laser on a wall?
I watched a video of a laser removing graffiti from a sandstone wall. Give it a few years for the size and price to come down, graffiti will finally be on the run.
@@tstahler5420 They can remove one but the next day someone will make another
@@tstahler5420 More like 20+ years, definitely not a few years. These machines are very large and require HUGE amounts of electricity. There is no way around this.
@@jokers7890 nonsense that small model in this vid is 100w, Its the size of a half a carton of beer and it probably draws about 800-1000w peak... less than a hairdryer.
how do we find the price??
It's too much expensive like 200 W starting price 70000 EUR they mf looting soon they come down
The nice ones like in this video are $500K+.
If your curious let me know
do you have the widest laser shoot , we will use for pipeline and storage tank !
Let me know if your interested and we can figure a way to communicate
This is only 4 industrial equipment. Very expensive
How much for the small one?
I can shoot you my number
@@fish4191 it must expensive like cars prices
@@christianpaulroldan4010 I'm getting one right away here. So stoked!
@@christianpaulroldan4010 CZcams won't let me post way to get hold of me.
@@christianpaulroldan4010 if your interested we could figure out a way to get in touch on social media.
Meh, at these prices, I'll wait for it to come pre-installed in the iPhone M 😂
When you absolutely, positively got to ................ , accept no substitutes.
The 100w handheld asking price is 110k... lol
How can I get a job using that all day
Contact me for this possibility…Roger C-P
Noice
Buen equipo ... pero al distribuidor de Argentina sólo le interesa trabajar con empresas ... no responde consultas de emprendedores con capital ... simplemente no le interesa ... habrá que comprar en China ... por el 10 % del valor que cobra P-Laser ... adiós !!!
Indian prise ?
You could not understand nor use this technology. It is too advanced for you. Please stop worshipping cows first and then you can consider buying this machine.
Davoodoox1 ouch lol
Hi, please contact our sales department at info@p-laser.com. Thanks!
@ definitely
Is it applicable to exterior window calcium stain ? or kind of like that ?
yes any think it can burn the surface.its a heavy big machine. base price is around $23000
you're better off using vinegar.