Except the last one... the wire in the door... it didn’t work here it kept spinning... try jamming multiple toothpicks in the door first then use your screw
@@kaltziferYT it's if the door is coming away from the hinge I guess? Allows a stripped out hole to be reused rather than re-drill four inches up or down.
You're better off forgetting them. These are all worthless trash. Don't ever do anything from one of these stupid "tool hack" videos. These only appeal to people who have never touched a wrench in their life.
Put a Phillips screw into a metal frame. Wait 12 years until it's rusty. Round out the head and try putting a rubber band over it to unscrew it. It wont work. You'll melt the rubber band before you get the screw out.
The one using the roles of tape with marker will raise the line about 1/4" higher once the marker rests on the role of tape. Need to take this into consideration when cutting marked object or - oops:\ (edit: spelling)
@@johnbeauvais3159 That's actually a great idea, with a thick book you can just open it and move pages to get whatever height you need down to the millimeter
That's a good point but it depends on the application, say they just needed to cut a 1 inch piece, even with the marker it's still an inch between the two lines drawn. But yes that first line is 1&1/8 or 1&1/4 inch from the end of the pipe.
I was literally watching these channel's shorts for over 40 minutes now without even noticing till i read u comment!! Thanks for spreading awareness bud! 😂♥️
@@zandurka1 not the point. Everybody isn't you. It's called "life hacks" like easier ways to do things... You're the person that sees a video about cheat codes on GTA and screams out "oh yeah well I completed the game on expert all by myself and earned my bazooka"... So. What.
@@zandurka1 That's fine IF you do it a lot but if it's not something you do regularly or don't have a lot of upper body strength, then its very useful.
Okay ngl, the one with the rubber band and the stripped screw is pretty good. EDIT: You guys can stop correcting me, I realize this is a very niche solution.
I’ve tried that more times than I care to think and it has NEVER worked. If a screw is cammed out it’s because it’s jammed in something. No rubber band friction is going to get that fucker out.
Haha I’m exactly the same. Always use the “measure twice cut once” but for some reason when I leave the place I’ve measured to go and cut the piece of wood…I enter another dimension where the measurements have changed and it no longer fits!
You use a tiny cloth on a wire to clean a hose. Cloth comes off, now stuck inside the hose. Push to the end of the hose with the wire, use a drill to pull it out.
Try getting a ramset nail out of cinder block with a carpentry hammer, it's not fun. Also that's was plaster over something, didn't look like slats, but either way most of the time, if you're pulling a nail out of something like that, you just have plaster there because that tape may have stopped it from coming out but there's going to be small fractures and that's going to ruin somebody's day when they bump into their wall and a bit falls out, so do it right.
That tape thing rarely works, especially when removing a screw. That rubber band thing Only works when the screw isn’t holding two pieces of something together and/or the hole is super loose like in this clip!
The last one you did, taking that screw out of the door. When you put that piece of metal in and re-screwed that screw in, you cracked the door. That's not helpful, that creates a whole other issue.
The crack was allready there before he removed the screw. The only reason you notice it at the end is because he opens the door up wider when he ram rods that crap in their.
I've lived in apartments where you just look at the wall and it crumbles like that. And then it makes a big gaping hole when you try to put in a little tiny nail. Water damage/moisture throughout the entire walls had turn drywall into crumbling chunks of "cement" and Black Mold.
Sum-beach and here I just recently drilled out a deck screw someone weebled out good. Quite literally all the while having a rubber band in my pocket that I use to keep my box of reclaimed screws closed.
The jigsaw trick is nice but you still have to have the perfect dimensions drawn out on the board to start with so you might as well just have a fucking jig.
I usually dont care about life hack videos but these are actually really useful. I'm a construction worker and one thing that pisses me off the easiest is a stripped screw😓
Toothpicks and dial soap or candle wax would be a better choice for the door hinges. They will compact when the screws go in so the wood around it will be less likely to split and the soap/wax will act like glue. Toothpicks, softwood dowels and composite shims whittled down make great concrete anchors too.
Actually good tips! For removing a nail from drywall Ive always used pliers and twisted them when I pulled them out. I've never cracked drywall using that method
It's not normal for people who don't know. You can't expect everyone to share the same experiences in life. Just because you know something, that doesn't mean everyone else should too.
@@tsemiu bruh if you have to see a video on how to get a nail out of drywall without fucking up the whole wall, you shouldnt be allowed near drywall or any hammer. Why is my generation so fucked that people really think this shit is some life hack?
@@Juri187xx 1st, you have no idea if I'm part of your generation. But you sound 40 so probably not. Second, the dry wall thing was just the first one. There were others that are helpful. When you do construction, not every situation is already in your head with a solution. You learn from your boss or coworkers. This is the same thing. I've come across plenty of stripped screws and I never heard of getting them out this way. Man you have severe social issues of you can't handle people learning new shit online.
The copper trick in screw hole I can see it my uncle is a carpenter whom I've learned from but he taught me to keep tooth picks in tool box they work as well IV even been installing trasition strips on concrete drilled my holes fill with tooth picks then hammer my nails in works good
For the door trick, I just used a bunch of these thin craft sticks. Works wonders, like a whole new door. (there was millions of holes from it falling off the hinges. My aunt once tried to use duck tape to keep it together........)
Just love seeing stuff like this this! It's amazing to see simple tips of ingenuity posted! A super thank you to you in posting this! This is very very much appreciated! Manifold blessings to you and your family Sir! 🤗😎👍🏻🙌🏻☀️✨
Wow, I learned something cool today, that rubberband for a stripped screw, totally useful & shoving some tiny metal sticks in to tighten screw better,thats a neat idea.Lol.
You can do the same with toothpicks in a piece of funiture, such as a table with the loose leg, instead of driving in longer and longer screws. Actually I subscribe to this channel because there's just *SOOO* many cool tips, (like how to remove a screw with a head that's snapped off; how to remove a spinning screw; how to mitre inside and outside corners; how to make a small piece of wood fill a large hole, etc). The uploader for this channel is filled with so much knowledge & is really generous about sharing his trade secrets 👍🏼
Its For loose screws I guess... If i stumble upon one I Insert Matchsticks or toothpicks to Fill the hole and give the screw a Tighter fit... No Filler No Glue and this Method is Used since Ages... I Had an old Door hinge which is Like a Nail and the whole hinge would Fall Out of the Wood Door frame so i put some Wood Sticks in the hole and hammered the hinge Back in place and voila it didnt loosen Up since then... I hope you Unterstand my Broken english xD and you're Welcome o/
I've used a raw potato to remove stuck and stripped fasteners and it worked! Of course the idea was not my own but the result of having seen some videos online that successfully used other strange stuff
Excellent. Since i'm always cutting circles with the jig saw a bit off what you did isn't just a guide but a compass cut out! Impressed! As for the wood door that gets stripped you could use wire? At first i thought they're going to use dowels , glue etc but that was slick! 😃😅😅 I amazed! 👍✅✅
Last time I was beginning to fuck up a screw, I switched the bit into a square one, just jam it in there and it works surprisingly well. But this is why Phillips head screws suck ass
For the last one, I just use toothpicks to make the screw hole tight again.
The screw was still spinning in ther end anyway 😂
Except the last one... the wire in the door... it didn’t work here it kept spinning... try jamming multiple toothpicks in the door first then use your screw
I was coming to comment, toothpicks. Cheaper too.
Bend it back on itself a few more times and it works really well
Why i even need to put something in there? I didn't get the last lifehack.
I use wood golf tees they fit perfect drive them in with hammer cut them with a utility knife the hole is filled with wood and screw fit perfect
@@kaltziferYT it's if the door is coming away from the hinge I guess? Allows a stripped out hole to be reused rather than re-drill four inches up or down.
I bet I forget all these tricks when I need them. But man have I been struggling my whole life and the solution was so simple.
IKR?
Lmao I was thinking the same thing 🤣🤣🤣
You're better off forgetting them. These are all worthless trash. Don't ever do anything from one of these stupid "tool hack" videos. These only appeal to people who have never touched a wrench in their life.
Boss is wondering why the demo took 4 days and $35 in tape
(◠ᴥ◕ʋ)(ᵔᴥᵔ)/ᐠ｡ꞈ｡ᐟ\( T_T)＼(^-^ )(づ￣ ³￣)づ(⊃ • ʖ̫ • )⊃
～(つˆДˆ)つ｡☆/ᐠ｡ꞈ｡ᐟ\ʕ ꈍᴥ༼⁰o⁰；༽(‘◉⌓◉’)ꈍʔw(‘◉⌓◉’)(‘◉⌓◉’)(°ｏ°)w＼(°o°)／༼⁰o⁰；༽༼⁰o⁰；༽
＼(°o°)／(ヘ･_･)ヘ┳━┳(ﾉ≧∇≦)ﾉ ﾐ ┻━┻ಠಿ_ಠ[̲̅$̲̅(̲̅ ͡ಠ_ಠ)̲̅$̲̅]ಠಿ_ಠಠ ೧ ಠ[̲̅$̲̅(̲̅ ͡ಠ_ಠ)̲̅$̲̅]ಠ ೧ ಠಠಿ_ಠಠ ೧ ಠಠ︵ಠಠ ͜ʖ ಠ¯\_(☯෴☯)_/¯¯\_(☯෴☯)_/¯乁༼☯‿☯✿༽ㄏ¯\(°_o)/¯乁༼☯‿☯✿༽ㄏ¯\_( ͡° ͜ʖ ͡°)_/¯乁༼☯‿☯✿༽ㄏ乁༼☯‿☯✿༽ㄏ¯\(°_o)/¯乁༼☯‿☯✿༽ㄏ¯\(°_o)/¯¯\(°_o)/¯₍₍ ◝( ﾟ∀ ﾟ )◟ ⁾⁾¯\(°_o)/¯乁༼☯‿☯✿¯\_( ͡° ͜ʖ ͡°)_/¯༽乁༼☯‿☯✿༽ㄏ¯\_(☯෴☯)_/¯¯\(°_o)/¯¯\(°_o)/¯¯\(°_o)/¯乁༼☯‿☯✿༽ㄏ¯\(°_o)/¯¯\(°_o)/¯¯\(°_o)/¯乁༼☯‿☯✿༽ㄏㄏ乁༼☯‿☯✿༽ㄏ¯\_( ͡° ͜ʖ ͡°)¯\_(☯෴☯)_/¯乁༼☯‿☯✿¯\_(☯෴☯)_/¯༽乁༼☯‿☯✿༽ㄏ乁༼☯‿☯✿༽ㄏ乁༼☯‿☯✿༽ㄏ¯\(°¯\(°_o)/¯_o乁༼☯‿☯✿༽ㄏ)/¯ㄏ¯\(°_o)/¯乁༼☯‿☯✿༽ㄏ_/¯
乁༼☯‿☯✿༽ㄏ(ノ￣皿￣)ノ ⌒== ┫┻━┻ ヘ╰( •̀ε•́ ╰)(ヘ･_･)ヘ┳━┳
(☞ ͡° ͜ʖ ͡°)☞(☞ ͡° ͜ʖ ͡°)☞
Why are we not allowed to skip forward or backward in these shorts?
Yes
@@kimbisdoes115 thank you
Do you walk to work or carry your lunch?
@@erzahler1930 You know what Batman said to Robin before he got in the Batmobile? "Robin, get in the Batmobile."
@@BoomShard17 yeah, robbing people is not nice, but how else are you going to get nachos?
Use a toothpick to tighten loose screws in wood, no wire or cutter needed, just insert toothpick in holes and snap it off at the needed depth
Zip tie scraps work too nice to save a couple sometimes
I have always used the free chipsticks from Chinese takeout.
I was waiting for the jigsaw to come full circle and cut the cord lol
Oh no he cut that part out so that the technique looks useful instead of pointless and dangerous
I was just about to leave a comment with that exact thing... And here you are, saving the day. Lol
Hey, that was just ONE TIME! I screwed up, let it go.
It would have been more interesting video with the cut cord ha-ha.
Same
Put a Phillips screw into a metal frame. Wait 12 years until it's rusty. Round out the head and try putting a rubber band over it to unscrew it. It wont work. You'll melt the rubber band before you get the screw out.
Kay, be back in 12 years and let u know the results
So just use it in screws newer than 12 years 🤦🏻♂️
@@onikinhas 😶
Dynamite
The one using the roles of tape with marker will raise the line about 1/4" higher once the marker rests on the role of tape. Need to take this into consideration when cutting marked object or - oops:\ (edit: spelling)
Personally I prefer to use a book for this stuff, a really thick one is great so it doesn’t shift but you can stack a couple if necessary.
@@johnbeauvais3159 That's actually a great idea, with a thick book you can just open it and move pages to get whatever height you need down to the millimeter
That's a good point but it depends on the application, say they just needed to cut a 1 inch piece, even with the marker it's still an inch between the two lines drawn. But yes that first line is 1&1/8 or 1&1/4 inch from the end of the pipe.
@@douggiles7647 That’s exactly right, I use it to mark bands on conical shapes for easier masking
6
that background sound is brainwashing us to not escape watching these shorts.
czcams.com/video/Atm0GwWs6lw/video.html
This one is more brainwashing
I was literally watching these channel's shorts for over 40 minutes now without even noticing till i read u comment!! Thanks for spreading awareness bud! 😂♥️
Cant hear you.... Need to watch... Shorts...
Must...watch...tricky...shorts..🤯..😁
@@MrBlack75922 заценил, спасибо))
I put toothpicks in holes on wood doors. Metal will damage the door
Just glue in a peg and then redrill the hole...
@@BobPapadopoulos you’d overcomplicate a fart son, toothpicks & wood glue is how it’s been done since before your great grandma started farten dust
@@patrickancona1193 some say he can even ef up a wet dream lol
Sorry my ignorance, but would we.put metal or wood in those points?
@@Longussss would assume the metal would round off the screw making it weak. Toothpicks would just form to the hole making it a tight fit
The wire for making nice circle cuts is good help
But the drill hole ruined the perfect circle.
@@joe8572 you can eliminate that problem by just drilling into the waste material.
Finally a useful lifehack
@@zandurka1 not the point. Everybody isn't you. It's called "life hacks" like easier ways to do things... You're the person that sees a video about cheat codes on GTA and screams out "oh yeah well I completed the game on expert all by myself and earned my bazooka"...
So. What.
@@zandurka1 That's fine IF you do it a lot but if it's not something you do regularly or don't have a lot of upper body strength, then its very useful.
Okay ngl, the one with the rubber band and the stripped screw is pretty good.
EDIT: You guys can stop correcting me, I realize this is a very niche solution.
Good News,!Thanks for sharing your clever work..
@DGlegend a stripped screw head is usually because the screw is in too tight which is primarily why this hack rarely works.
I’ve tried that more times than I care to think and it has NEVER worked. If a screw is cammed out it’s because it’s jammed in something. No rubber band friction is going to get that fucker out.
@DGlegend is there an Old England?
Same trick works with paper, if done right. May be time to consider the fact you guys are not as handy as you think.
even with the wire hooked to the jigsaw, I’d still manage to cut a square
Haha I’m exactly the same. Always use the “measure twice cut once” but for some reason when I leave the place I’ve measured to go and cut the piece of wood…I enter another dimension where the measurements have changed and it no longer fits!
@@mikey2363 I don't think you realized he said square and not circle
czcams.com/channels/Wpq15T04ampgBm617IBqTw.html
U n me , both ,smh lmao
Or a triangle !
@@user_hat yeah I realised
You use a tiny cloth on a wire to clean a hose. Cloth comes off, now stuck inside the hose. Push to the end of the hose with the wire, use a drill to pull it out.
Boas ideias,é isso q eu precisava! Parabéns!👏🏼👏🏼Show!!!
When I saw the drawing a perfect circle trick I was like "old news". But when you hioked it up to the jigsaw my mind was blown
It's an old hack, he's reusing clips already...
Wow
@@superslimanoniem4712 yeah well I domt binge watch his videos, this one just showed up in my reccomended
No need 2 even mark the circle, huh?
@@miked2090 for real! I though the same thing.
Only in America, half of the wall comes out with the nail
Assistant me🙏
Except if there is plaster iver he brickZz🇿🇦💌
OH STFU GAYLORD PERSON
Try getting a ramset nail out of cinder block with a carpentry hammer, it's not fun. Also that's was plaster over something, didn't look like slats, but either way most of the time, if you're pulling a nail out of something like that, you just have plaster there because that tape may have stopped it from coming out but there's going to be small fractures and that's going to ruin somebody's day when they bump into their wall and a bit falls out, so do it right.
I bought this very strong double sided tape, when I removed it, it took a big chunk of the wall with it lol
Me 3ncanta la simpleza de tus ideas
I dig this music 🎶
I thought that he was going to hide his money in the door hinge like the other guy lol
what was he trying to do?
That tape thing rarely works, especially when removing a screw.
That rubber band thing Only works when the screw isn’t holding two pieces of something together and/or the hole is super loose like in this clip!
Very handy tips, added to my favs so I don't forget.
The last one was the best and most useful
I.didnt understand what he did with the door
@@removalenti2222 when The screw in the door hinge becomes loose, use a piece of wire and twist it as shown. It acts like a plug to anchor the screw
The last one you did, taking that screw out of the door. When you put that piece of metal in and re-screwed that screw in, you cracked the door. That's not helpful, that creates a whole other issue.
The crack was allready there before he removed the screw. The only reason you notice it at the end is because he opens the door up wider when he ram rods that crap in their.
Holy shit, these are all actually life hacks, I never thought I’d see the day
I mean, that jigsaw piece 'o hanger wire trick WAS legit...
That jigsaw method works awesome until you get so excited its working that you forget to move the cord and "Schhoink", off with its head. XD
Gotta love the first clip using the wood for even support to pull unlike the first. Yea, tape was the big reason not the leveled pull /s
it's incredible how he broke the laws of physics breaking the wall while removing the first nail.
I've lived in apartments where you just look at the wall and it crumbles like that. And then it makes a big gaping hole when you try to put in a little tiny nail. Water damage/moisture throughout the entire walls had turn drywall into crumbling chunks of "cement" and Black Mold.
Pretty common in old houses and apartments
I'm gonna sub, even though I won't use these life hacks every day. Shoot they are still useful unlike every other life hack channel
Sum-beach and here I just recently drilled out a deck screw someone weebled out good. Quite literally all the while having a rubber band in my pocket that I use to keep my box of reclaimed screws closed.
the music sounds like a child hitting random notes on a synth
I was afraid you would cut the cord.
But these are pretty good and helpful, thanks.
Yeah I started panicking about that
So that's what those slots in the blade guide foot are for! Hmmm!!! Clever!
I always keep rubber bands around my drills.
Rubber bands are great for breaking into cars, opening locks, etc.
Sounds like one of those alarm tones no one uses.
These are actually useful, hat off to you, man
That rubber and 1 ,works great on bits that won't stay out .
The jigsaw trick is nice but you still have to have the perfect dimensions drawn out on the board to start with so you might as well just have a fucking jig.
Good one, I don’t even know why I watch these and when I’ll be needing this knowledge but I still watch coz they’re satisfying to watch.
For the torx bit one mac tools makes a set of torx bits that increase the chance of removing rounded torx screws
Guy I work with swears by a slightly bigger Allen wrench just pound it in with a hammer I can't vouch for it though... Sounds possible 🤷
@@kylecanning9216 the allen wrench damages the fastener where the torx set doesn't damage the fasteners
I usually dont care about life hack videos but these are actually really useful. I'm a construction worker and one thing that pisses me off the easiest is a stripped screw😓
Toothpicks and dial soap or candle wax would be a better choice for the door hinges. They will compact when the screws go in so the wood around it will be less likely to split and the soap/wax will act like glue. Toothpicks, softwood dowels and composite shims whittled down make great concrete anchors too.
Golf tees work great
So I learned if I have a rubberband, painters tape and a metal rod, I can fix everything in the house. Good to know
Actually good tips! For removing a nail from drywall Ive always used pliers and twisted them when I pulled them out. I've never cracked drywall using that method
Tebaik tunjuk ajar nya...👍👍👌
Unlike so many of these dumb hack vids, this one is actually really useful. Kudos
People on TikTok if they do something completely normal: *LiFe HaCk*
It's not normal for people who don't know. You can't expect everyone to share the same experiences in life. Just because you know something, that doesn't mean everyone else should too.
@@tsemiu these are no life hacks bro, its common sense
@@Juri187xx get off your high horse dude.
@@tsemiu bruh if you have to see a video on how to get a nail out of drywall without fucking up the whole wall, you shouldnt be allowed near drywall or any hammer. Why is my generation so fucked that people really think this shit is some life hack?
@@Juri187xx 1st, you have no idea if I'm part of your generation. But you sound 40 so probably not. Second, the dry wall thing was just the first one. There were others that are helpful. When you do construction, not every situation is already in your head with a solution. You learn from your boss or coworkers. This is the same thing. I've come across plenty of stripped screws and I never heard of getting them out this way.
Man you have severe social issues of you can't handle people learning new shit online.
I needed that tip on cutting a circle on a jigsaw so thanks!
The copper trick in screw hole I can see it my uncle is a carpenter whom I've learned from but he taught me to keep tooth picks in tool box they work as well IV even been installing trasition strips on concrete drilled my holes fill with tooth picks then hammer my nails in works good
For the door trick, I just used a bunch of these thin craft sticks. Works wonders, like a whole new door. (there was millions of holes from it falling off the hinges. My aunt once tried to use duck tape to keep it together........)
Just love seeing stuff like this this! It's amazing to see simple tips of ingenuity posted! A super thank you to you in posting this! This is very very much appreciated! Manifold blessings to you and your family Sir!
🤗😎👍🏻🙌🏻☀️✨
‘Many fold blessings to you and your family sir!’ Damn girl calm down. It’s a tool video not the cure for cancer
@@SparkyDad She's just trying to get a heart from the channel
😀😗😙😚😋😍😘😇🤐
Lloldwjd😍😍😍😘😚😙😗
The rubber band on a stripped screw never works
Wood golf tees work great for stripped wood screw holes to.
I'm only here looking for the name of that song.
I don’t get the last one… the screw was loose or the door wasn’t level?
Yes
exactly!
You are correct
С лобзиком генеально возьму на заметку.Спасибо
Он там чуть кабель не перепилил) да и жёсткости никакой
@@user-eq4nh9qc3f по тонкому льду любит ходить
Gracias por compartir!!!! Genios
GEEZUS these tips are hella useful and super satisfying to watch.
Wow, I learned something cool today, that rubberband for a stripped screw, totally useful & shoving some tiny metal
sticks in to tighten screw better,thats a neat idea.Lol.
You can do the same with toothpicks in a piece of funiture, such as a table with the loose leg, instead of driving in longer and longer screws.
Actually I subscribe to this channel because there's just *SOOO* many cool tips, (like how to remove a screw with a head that's snapped off; how to remove a spinning screw; how to mitre inside and outside corners; how to make a small piece of wood fill a large hole, etc). The uploader for this channel is filled with so much knowledge & is really generous about sharing his trade secrets 👍🏼
Except it will rarely ever work. Generally only if the screw was stripped putting it in, not stripped taking it out
Ok these are actually pretty good for once
That wood shards in the screw holes of a hinge was around at least 40 years ago when I learned it!
Аллоҳ янги авлодларни ўзини танийдигон қилсин амин..
These were cool! I especially like the rubber band in the striped out screw. Glad to see you didn't cut your jigsaw cord, lol.
You have not lived until you've cut a power cord at least once.
@@damnhandy Done that plenty with skilsaw's, lol
I can't believe it. Actually useful tips.
Guahuuu q. Buenas técnicas, gracias y saludos!!!!!
The first one is why you need to be patient and gentle
06 by
No
What does the last tip mean ? I can't get it. Thanks
Its For loose screws I guess... If i stumble upon one I Insert Matchsticks or toothpicks to Fill the hole and give the screw a Tighter fit... No Filler No Glue and this Method is Used since Ages... I Had an old Door hinge which is Like a Nail and the whole hinge would Fall Out of the Wood Door frame so i put some Wood Sticks in the hole and hammered the hinge Back in place and voila it didnt loosen Up since then... I hope you Unterstand my Broken english xD and you're Welcome o/
Whattttt i never thought of using a rod for a jig on a jigsaw
The trick with the rubber band is something that I always see but never works for me for some reason.
I've used a raw potato to remove stuck and stripped fasteners and it worked! Of course the idea was not my own but the result of having seen some videos online that successfully used other strange stuff
The screw was spinning in the last one.
We have owned a Home Remodeling Company since 1999. Do you realize how much easier you have made my life as a woman?
Gostei muito da última!!!
“And that, is how you remove nails without damaging the wall.” Proceeds to demo the wall next.
SHEEEEEEEEEEEEEEEEEEEEEESH
Great vid & the 🎶musick!
Thank you.
Why waste copper to get a screw to grab when you can just fill the hole with toothpicks or small piece of wood for the same result?
Wow. Very nice and cool. It's really awesome. Amazing.
Brilliant, you just well sorted how. I can fix all threaded screws nows. Nice one, cheers guys.👌🏽
Well all are used by anyone in construction as to the wire in dire hinge use a tooth pick and drop of Elmer's glue
That third one is actually pretty smart...
Take out the sound music sound
EFX!! I like to here the screws and wood and stuff ... 😁
Excellent. Since i'm always cutting circles with the jig saw a bit off what you did isn't just a guide but a compass cut out! Impressed! As for the wood door that gets stripped you could use wire? At first i thought they're going to use dowels , glue etc but that was slick! 😃😅😅 I amazed! 👍✅✅
Excelentes ideas!!!
Finally 3 useful and not weird life hacks lmao
If you think I'm trying the last one, you must have a screw loose
Ahh remember when life hacks were useful? Its so rare these days, this is the only example i found this year :)
I love the way you cut the circle...👍🏻👍🏻👍🏻
Good thing it wasn't my old lady or that jigsaw would've ended up with at least 3 different pieces of cord
Also a match in a screw hole increases hold if hole bit big.
Ah! Science! How to re invent the way you do every tasks! Luv it🙂👍
Gracias, sigo aprendiendo,.......nuevamente gracias
Anyone else continue to like these videos because you like the comments shitting on the video?
Last time I was beginning to fuck up a screw, I switched the bit into a square one, just jam it in there and it works surprisingly well. But this is why Phillips head screws suck ass
Love that cycle saw thing and that rubber band striped screw thing
Thank you so Much!! I’m getting ready to pull nails and hang new pictures.👍
Parabéns 👏👏 mandou bem
Muy buena enseñanza