I was going to change my spark plugs. And the i broke the screw that tighten up the coil. And half of that bolt it stuck in there. I don’t know how to take it out
a real poor designed head to remove when both cams need to be removed to get the fromt two head bolts out which also requires a $65 Mac T-55 to remove them. The bolts turn 90 degrees going snap-snap 4 times until POW the bolt comes loose. Every time I looked to see what I'd broken. Notice you didn't show that!
It would be neat if you put one of these engines in a Jeep
Modern engine in vintage Jeep, maybe some day
Nice
Thanks for watching and commenting
I was going to change my spark plugs. And the i broke the screw that tighten up the coil. And half of that bolt it stuck in there. I don’t know how to take it out
Do you have a welder? Is it broken off flush or sticking out a little?
@@fastdadgarage-northsouthch4418 i do not have a welder, and it’s just a flat broken screw nothing to grab on
@@Marrivers17 you may need to find a shop near by and take it to them.
Yup. Cracks are not good😢
No sir they are not… thanks for watching
that really did get hot :(
The owner said she didn’t drive far after the light came on….
judy kept driving until it wouldn't go anymore :)@@fastdadgarage-northsouthch4418
a real poor designed head to remove when both cams need to be removed to get the fromt two head bolts out which also requires a $65 Mac T-55 to remove them. The bolts turn 90 degrees going snap-snap 4 times until POW the bolt comes loose. Every time I looked to see what I'd broken. Notice you didn't show that!
Yeah, that is all poor design. I should’ve showed the bolt removal it was “interesting”.