Video není dostupné.
Omlouváme se.
HOLDEN REVIVAL WITH DIY RUST REPAIRS , PARKED FOR YEARS CLASSIC CAR SURVIVOR AUSSIE 1 TONNER UTE
Vložit
- čas přidán 29. 05. 2024
- This episode we are back working on or humble hard worker Holden 1Tonner, we found the tonner parked for almost 2 decades at a closed concrete plant near the town i grew up in, Last episode was your classic "Will it run" but this time its a few steps further with some rust repairs , floor pans and lots of work inside to get the classic survivor Holden 1 step closer to back on the road running and driving.
backshed.net.au/ for merchandise people we are restocked ! Tommo is back and 1 step closer , sorry its been a while but “just life “ hahahha. Knuckling down over the coming weeks to get a couple of episodes up quicker . Cheers people and talk to ya in the comments 🍺🍺👍
G'day mate, was after one of your flannos, will you be getting any more in XL anytime soon. Love the vids 👍
Who here gets youtube up every week just to see a new episode
🍺🍺
Looooool!!!!! Every week!!!!!!😢
I have a list of channels I watch, here are few:
Obviously Backshed
Diesel Creek
Watch Wes Work
South Main Auto LLC
Ol2Stroker
Nick’s Garage
Mark Behr
ThunderHead289
Project Farm
Gotta be the most fair dinkum car channel on youtube, i swear. Cheers mate, learnt a lot and loved the journey.
Too kind mate 🍺🍺👍
His a little ripper he talks how we thinks . Yep you’re right there 🇦🇺👍
@@vensimo4293 cheers mate🍺🍺👍
The master of just getting stuff back on the road. Love it mate
Cheers mate🍺👍
Amazing transformation. One man's trash is another's treasure! Loved all the quips my favourite "GM approved treated pine" LOL.
Hahhaha yep 100% approved🍺👍
I’ve been crook as a dog all week - this is exactly what I needed.
Hope ya feel better soon them Lurch ol mate🍺🍺👍
Your right there everyone f sick 😂👍🇦🇺
Yes. Backshed is BACK BABY!!!!!
Cheers mate yeah im always here they just take time around family and work🍺🍺👍
Well played Mick, I’ll watch this till I fall asleep tonight, then rewatch it on Saturday with can in hand! Well played mate.🍻
Hahaha 🍺🍺👍
Did the same thing fell asleep last night woke up early this morning fell back to sleep took it back an hour just finished
Hahhah cheers mate
Imagine weekly episodes of this! That would be gods work, satisfying me for life 😂❤
Haha maybe one day when im not working mate🍺🍺👍
Looks really good, oh what a blast from the past.
@@SimonManning-z5c cheers mate🍺🍺👍
Can’t wait to knock off at 7pm and get home to watch Thommo
Cheers mate 7pm beer time 🍺🍺👍
I've been saving this for a quiet evening to sit back and enjoy, there is something about you and the way you come across that hits the spot and as you say best not to over think it 😊. Your channel just reminds me of my time in body work, I just enjoyed it, sad I know. Looking forward to your next post young man. Gary 🇬🇧🇬🇧
Cheers gary gland you can relate🍺🍺👍
Love your work mate. Giving me inspiration to work on my tonner that’s been of the road for the last 15 years 😢
Rip in ol mate🍺🍺👍
I am a retired and I found your channel by luck recently. I have enjoyed your road restorations projects and our Australian
humour That, I viewed all your videos in a week. The only advise is I hope you don’t kick yourself for not painting the cars when you are sitting in a recliner and the grand kids bring the shanty
Because patina fashion and flavour in the world presently come and go
Cheers mate i appreciate ya saying 🍺👍👍
Another one brought back from the dead awesome work looks cool
@@hellboy8328 🍺🍺👍
Looking forward to the next episode, Mick.
@@andrewsteel7718 👍🍺
Mate, that's just ridiculous. The way you've taken it from the paddock back to road. Well done. Love your work. You give guys like me that bit of positive energy just to go out and do it. Thankyou
Its 100% able to be saved just dig in mate🍺🍺👍
I watched you videos on hq mucas again today, I've watched then a few times now and smile comes to my face everytime you Start it up. Sounds fantastic.i had a hj premier 308 turbo400 when I was 18. It had a sound you just gotta love.that big Block you have in the hq sounds awesome.
@@chrish.5594 cheers mate🍺🍺👍
Great work on the old Toner
Cheers mate🍺👍
When i used that windshield tool, the bolt that holds the pulling handle bent then snapped off & sent me flying across the shed cause I was doing exactly what you were doing. Shoved it straight in and started pulling hard.
That look on your face when you heard the screech of the glass maybe cracking as you were at the top right corner was priceless 😂
Haha yep i was nervous hahhaha🍺🍺👍
1:34:49 well, the cab has to come off now 🤣 Ol Tommo is a legend, and I love the commercial front end 🇦🇺🤙🏼
That cab aint comming off bud hahahah🍺🍺👍
Mick I’ve missed a year mate I had to refresh and catch up 😂 on night shift this week and got the blokes watching they hate me , but I’m the oldest so they give me a good go on the tv 😊anyway you’re got new fans now and the don’t even know it . Keep your legs together mick . Cheers Robbo B first Responders 👍
🍺👍
Looking good. Nice to see you back at it.
Always at it mate they just take time 🍺🍺👍
Great work Mick, love a Holden Tonner!
🍺🍺👍👍
Excited for the EK Holden episode whenever it comes out.
We have 2 coming mate🍺🍺👍
@@backshed5295 oh fuck yes!
Fab job, Michael! Wonderful to see the old boy back in action, battle scars and all. 😊
Yeah i like the hard work story the ratty body tells 🍺🍺👍
Well done Mick! Really love watching this old girl come back to life! Can't wait for the next one.
Cheers mate 🍺🍺👍
My Dad had one of these, '79 HZ 1 tonner with the commercial front, he used it for his plastering business. It was the light brown/cream colour.
🍺🍺👍solid ol ute!
Awesome mate, great to see it on the road...job well done.
Cheers mate🍺🍺👍
Nice one mick love what you do 👍🏴
Cheers mate🍺🍺👍
Mate it looks great and if I lived in Australia that's what I would be driving all day every day 😊
Cheers mate🍺🍺👍
Once again love the show mate great stuff the more we can keep on the road the better oooh btw don't even joke about painting it lol 😆
Cheers mate🍺🍺👍
Excellent as always Mick🍺🍺
Cheers mate🍺🍺👍
Yay, you’re back. Love what you’re doing to tommo, mate.. also I love your SOH. You’re the most laid back guy I’ve ever come across that’s so laidback when building a car…. I love it…. Keep up the good work, mate. We love ya work.
Cheers mate too kind🍺🍺👍
Bloody hell mate that was a ripper video- I should be working but just watched the whole thing. Best car build video I’ve seen in a long time and since I have been stressing over tackling my floor pans in my 1979 HJ45 Ute and just welding them with my eyes while sinking a beer lately you’ve convinced me to crack on tonight. Legend. I’m subscribed and will be back for more. The old Holden looks mint with with a squint, you did a great job. Cheers
Cheers mate i appreciate ya saying🍺🍺👍
Looks mint Michael great job.
Cheers mate thanks🍺🍺
Another great video Mike. Looks great.
Cheers mate🍺🍺👍
Great stuff as always Mick
Cheers mate🍺🍺👍
Top episode Mick.
Cheers mate🍺🍺👍
Another great Vlog, the old 1 tonner always turns heads on the Rd , cos most must be rusting away at the tip! Nice choice of music too, nothing to Heavy , cheers from Downunder ❤️🦘🦘🦘🇦🇺
I really appreciate ya saying mate , cheers 🍺🍺👍
Itching for the next episode already.🤞
Cheers mate i appreciate ya saying🍺🍺👍
Wow well done good job look good I love old HQ Kingswood
Cheere mate🍺🍺👍
Hey mick ,love watching your videos mate,just wish there were more of them lol,all good tho mick,it's always worth the wait except walking thru the junkyards but that's only my opinion. I wish I had half your knowledge about cars . Good work mick,thanks for your entertaining videos mate.
@@chrish.5594 🍺👍
Hello Mick, Love the way your putting these old cars back on the road. I have watched all your videos and you have talent ,very skillful and you remind me of me when i was younger. I did a few HQ's when i was young and they turned out pretty good. Can't wait to see your next video ,,Please make it soon. Stay safe .
Cheers mate🍺🍺👍
Awsome work as usual mate tommo would be proud lol
@@elz0792 cheers mate🍺🍺
Great vid mick. I would like to see the tray lowered a bit and levelled up. Keep up the great builds👍
Yeah maybe next episode mate🍺🍺👍
Hahahaha. “No ones gonna see your wealds from underneath… well, unless you run over a pedestrian “ 😂😂😂😂
@@jedboucher2011 🍺👍
Great job Michael.. good looking tonner . Good advice on the floor pans, just do it..
Yep have a crack 🍺🍺👌
Great content there, Michael.
I downloaded this video after midnight and watched it all night in bed while sleeping. That's how much I have enjoyed your videos.
I can't remember if I have mentioned to you. But I do have a CZcams channel also now, myself.
Bill's Channel - sta
Mount Gambier, 1:30 AM.
I do have quite a few videos on my channel and will be putting more up later on.
Cheers mate 👍
From William.
I have only started my channel since late November, early December 2023.
🍺👍
Your such a good teacher 🏅 great viewing 👍 Thanks for taking the time to show us all these old beauties put back on the road again.
Cheers mate🍺🍺
G'day Mick... Love ya work mate!! 🙂
Hey Brooksy cheers mate🍺🍺👍
Great work well done thanks for sharing
Your welcome mate i appreciate ya watching 🍺🍺👍
Mucus sounds angry about being outside 😊
Hahha yeah maybe🍺👍
Im restoring an escort panel van and a HD holden pretty much with what ive learned from this channel. Also I've bought after market pans so ill make sure to repaint them before i wack em in, thanks for that
🍺🍺👍
weld through primer is a good idea on all that bare metal under your plug welds👍
🍺100% mate 🍺👍
Welcome back Mick!
A rust repair episode......I can only image how long it will take for you to find something surprisingly hot! 😂🍺🍺🍺🍺👍
Hahhaha yeah theres a bit to choose from here 🍺👍
@@backshed5295 i can't wait!
Brilliant result 👏👏
Cheers mate🍺🍺👍
Tommo is looking the goods,awesome video
🍺👍
Patina Rocks! You can use the car with no fear of parking dings and scratches and still look cool.
You're living the dream.
Cheers mate🍺🍺👍 yep i do like the fact you can use patina cars🍺👍
Awesome job mate. Very enlightening thanks.
Cheers mate🍺🍺👍
Guna be a brand new rig when you finish, thanks for sharing, all the best to you and your loved ones
Cheers don thanks for coming back yet again🍺🍺👍
The right tools, a bit of an idea about restoration, not too much procrastination and you’ve almost made a silk purse out of a sows ear. I’m loving it, thank you 👍
Hahhaa love it , yeah that probably describes it nicely🍺🍺👍
Awesome job Micko, looks like someone has lifted that tray by a good 4"
Tipper hinge has it up a bit mate 🍺🍺👍 maybe we will do something on that soon🍺🍺👍
Awesome Mick just saved another Holden from an undesirable death well done mate , cheers , Shaneo Nelson , NZ, 👍🍺
Cheers Shaneo🍺🍺👍
Cheers mick. Hope you have those squint o rama welding glasses in your merch.i need some! Cheers mate
Hahhaa 🍺🍺👍
Luv ya work Mick….. cheers 🍻
Thanks mate i appreciate ya saying🍺🍺👍
Just finished watching your latest ep, the interior looks awesome so does the outside with the clear coating. Great work as always Mick👍
Cheers chris🍺🍺👍
Well bugga meick just ran into your lively family at Whitfords shopping centre Perth !
What a spin, had me speechless!
Anyway more than welcome to come over for a beer and talk cars.
Keep up the good work, love the show.
Cheers
Macca
Sorry bloody voice to text doesn't really work
@@shaunmcnamara9058 🍺🍺👍
@@backshed5295 ....What Suburb are you guys staying in?
@@shaunmcnamara9058 kallaroo mate
@@backshed5295 wow close I'm in Hillarys
If you're interested in some content, I have a 2003 Monaro, my mates have a 1000hp XY and a A9X Torana ....plus a few beers 🍺🍻
I thought you quit. Glad to see you back.
Always here mate they just take time in around life , family and work 🍺🍺👍
Love what you do Mick , Just the basic resto to get it back on the road. Just to sell it or complete it later. It’s a big thumbs up from me
👍👍🍺
Love the tunner. I have the same HZ belmont model it was originally a HP 253 four speed but now a 350 turbo 400..
@@GoneFalconcampin 🍺🍺👍
Nice work another cool resurrection
Thanks mate🍺🍺👍
Yea, a new Backshed vid 👏👏👏
Cheers mate🍺🍺👍
Tommo looks bloody awesome love this ute
Cheers mate🍺🍺👍
Thommo is looking good and dropping that headbord really sets off Thommo
Cheers Les🍺🍺👍
Hi Mick looking forward to sitting down to this one🙂
Cheers mate i appreciate it🍺🍺👍
Another awesome video, Mick. As for patch repair panels, as Graeme from XA Coupe Guy says, ‘they’re far from perfect but they’re a good start’. Another one saved to drive another day. Cheers, Bob from Newie.
Hey Bob , yeah thats it they are a guide at best🍺🍺👍
So much work doin rust. But yer so satisfiyn an cheers to those do it everyday keep the oldies rollin. Thanx
🍺🍺👍
Back Shed- One of the few, better alternatives to so-called “Reality TV” like Motor Trend. One can tell the expletives, car seat throwing, hand tool and tantrum chucking and other drama ain’t scripted.
Thanks for the heads-up ‘bout “Mucus”, let’s git r dun, Son!
Hahha cheers mate🍺🍺👍
Nice 👍 job Mick tonner look's great 👌 nice job saving IT
Cheers mate🍺🍺👍
Good stuff i enjoy your content looking forward for the episode. cheers from kiwi land.
Thanks Graham i appreciate ya watching from over the ditch mate🍺🍺👍
Came up beautiful mate. Props to the effort put in. Would love to have one of these as a daily, driving it around telling its story 🙌
Yep thats what i like about leaving them ratty🍺🍺👍
Best channel on CZcams mate
Cheers mate gland you enjoy it🍺🍺👍
Never new that they stuck a q'ee front end on a HX ute from factory,
The change in just 10 days work is a credit to you Mick, whilst taking no short cuts she looks GREAT.
Cheers mate🍺🍺👍
The front panel on the tonners wasn't changed until the WB series.
Great to have you back Mick , Another totally enjoyable video, Keep up the good work
Will do buddy🍺🍺👍
nice visual tool to your great skills yah.
I wish I could be that experienced at working on older cars 👌 1:32:42
Too kind mate🍺🍺👍
Spot on video mick, b3en looking forward to the next install on the old 79 1 ton 👍
Cheers mate🍺🍺👍
Good move with the head rail, Michael. He came up…..not too bad 👍🏻
Hahhaha yeah he is Not to bad 🍺🍺👍
I miss my old kingswood, sold it for $600. Love watching the Ute come together.
Cheers mate🍺🍺👍
Love your skills Mick
Cheers mate 🍺🍺👍
Great job. It's nice to see it on the road again. Such a cool car.
Cheers mate🍺🍺👍
This is so cool. They look like the El Camino's we had around here. But the cab is closed in.
🍺👍
Good on you Mick.
Great to see you getting another Aussie icon back on the roads.
Cheers mate🍺🍺👍
Love the look of Tommo. Same colour as my old HZ sedan and my HQ with a Z front end. Seeing what you are able to do with them makes me wish and just given them a freshen up like this.
Cheers mate yeah i didnt spend much to do it either which is a big thing for me . Fresh kinda cool and driving for not much cash🍺🍺👍
The Tonner, from factory is quite a parts bin special: HZ with HQ front panel. Guards must be HQ as well. HQ, HJ indicator stalk. Didn't get the multi function column stalk that HX onwards has. Unique Holden letters badge on the front, instead of the lion badge in the grill. Basic, easy to repair bumper, grill, and indicators. The indicators look like the same as on a 6x4 trailer. Ineresting comparism with my FG Falcon cab chassis, which is basically the same as the FG sedan, from the front doors forwards.
🍺👍
Absolutely killed this one mick! Amazing job!
Cheers mate🍺🍺👍
Another fantastic job Mick, just love your work
Cheers mate🍺
First time watching, l have a tonner which I’m doing up. This is just the kick in the ass l needed, l think on things to much 👍
Dont over think it mate hahah🍺🍺👍
Looks excellent,thommo come up a treat.love them rims.Mick you are just a magician nothing you can't do.keep em coming
Too kind mate🍺🍺🍺
Good to see you old mate.
Straight back at ya mate🍺🍺👍👍