Make Your Own Outrigger Vise Stop
Vložit
- čas přidán 5. 09. 2020
- This detailed video shows the step by step fabrication of a very versatile and strong vise stop. Its long, but a great 'True" tutorial on how its made. Take a look. I'll soon put the plans on my website, under the plans tab.
Referenced 4 jaw video: • Clever way to indicate...
Related video: • Mill Accessories you C...
Patreon Support: / joepie
Website: www.advancedinnovationsllc.com
Web Store: www.advancedinnovationsllc.co... - Věda a technologie
I definitely enjoy the DIY videos such as this one. I wouldnt mind seeing more of them. You end up showing more useful tips and tricks along the way than you know.
Thanks. This one had a bunch.
FINALLY someone on you tube showed way protection with a wood block on CZcams!! You are to be congratulated. Might be a sign he knows something CZcams viewers. Might want to pay attention as I use to tell my students.
Thanks for the support. When the chucks start getting bigger, A cradle or drop board is a very good idea.
@@joepie221 When I brought my new lathe home in 1993 to start my business, I made a lathe board before I did the first job. EVERY time something heavy goes in or out of the chuck the board goes on the ways.
The bonus material was worth the extra few seconds! Thank you. I can never get too many belly laughs.
There are very few "CZcams" machinists that I would want to spend a day in the shop with to learn stuff like this from, and you are at the top of my list. I would be happy to sweep your floor 😄
I started in the hobby quite late in life and have had to cram as many bits of knowledge as possible into my thickening head as fast as possible. You have been an integral source of what have learned, and just wanted to thank you and encourage you to keep up the great work.
Every few months, i go through Joes vids, most often, i rewatch those i already saw a few times... The amount of high caliber shit he lays in his vids is amazing... Whats more amazing and much worse is how easy it is to forget some of his tips and tricks, which is why i rewatch Joe`s stuff every so often... You sir sure are right when you claim Joe to be admirable as a teacher and a machinist...
Thank you both for your support.
@GutPyle Glad to help.
Great video! Really love the narration of how things can go wrong. Advice on the tool pressure against the large holes, even the comment not to cut through the threads which would seem obvious to a machinist but not to a newbie. I watched many hours of yours and other machining videos years ago and bought a lathe and mill and made parts literally the the day I set them up. Your videos are by far the best for learning how to make things come out right. There is no casual watching on your videos, yours are like a master class, notes and attention and sometimes even a calculator are required. I can't express how much I appreciate your selfless contribution to the trade through your videos.
Thank you. I take great pride in the material present.
Great vlog Joe, thanks for sharing.
Perfect job as always Joe
One more shop tool added to the projects list now. Thanks Joe!
That was a whole bunch of great tips. Thank you Joe. You are the best 👍
As always you have a useful shop aid to make .thank you for showing how simple the process is .
Superb video, Joe. Thanks for sharing your experience.
So many useful tips on a part that seems simple on the surface. Thanks!
A "simple" job made very interesting. Thanks Joe
This video is a goldmine of very useful ideas! Thanks Joe.
This was a good one Joe, I became very aware of several things that I had not thought of before... very helpful, thank you Joe!
Another master class. Thanks Joe
Thanks for the great video Joe! Learned a lot! Especially the tips for working with stainless.
Pure GOLD....... brilliant nuggets everywhere. Saving this to my machining refresher playlist. Thank you Joe 🙏
Finally got around to making one, I should have made time for it way sooner, I’m already saving time using it- Thanks Joe.
Such a simple looking tool/jig but you have included some very valuable tips in the process. Thanks for all the videos. Happy machining.
Hi Joe,
I learnt lots on today's video, I liked the logic the proportions of the component parts. Thank you.
Take care
Paul,,
Thank you, Joe for all the tips!
A great video. Covers stock cutting, drilling, tapping, 3-jaw and 4-jaw lathe chuck, and boring on the lathe, as well as using a stop in the mill vise. . A lot of really useful information. + Thanks for taking the time to video and post. +
Thanks for watching. This one was loaded with tips.
Very useful Joe! I have made some interesting stuff, mostly taught by people like you sharing their experience. Thank You!!
I completed mine yesterday, turned out very well. Thanks for the excellent tutorial!
just made one, like you say nice quick project and handy. in the past ive used all sort of contraptions and fixtures. finally you prompted me to make one.... Thanks
Great vise stop. Very well made thanks for the video. I got a couple of vise stops but only one vise.
An abundance of very good advice. Thanks Joe for your knowledge and the time it takes to make all these videos to help us in our shops. You would make a very good teacher in becoming a machinist.
Just made one! Thanks for the ideas and videos.
Great project and learning video. Looking forward to a copy of the plans. Thanks for all your hard work, and my education.
Very welcome
Handy stop. Thanks for the video Joe.
Joe, I can’t believe I missed this old episode. I just want to again say how much I appreciate how you’ve thoughtfully explained everything you did, including the design details for various features. All the best to you….. Joel. 👍😎👍
When I saw the end with the rare bonus features, I spit my tea all over the computer screen. Keep making chips Joe!!! Great video!!!
I had considered editing that out, but the 2X voice was too good to leave behind. It sounded like a drunk ewok from star wars.
What a great video! I'm all set on vise stops for now, but I love how you work SS and the tips on the different grades. Thanks Joe!
Thanks for checking in Guy. Stay well.
I have watched this video several times because you give critical information for designing clamping features that I have used many times and always been successful. Thank you
Thanks Joe for the great video and the bonus material. Thanks also for the tip on playing back on slow speed. I had to play with the different speeds and sure got some good laughs.
Dale in Canada
The indicator survived unharmed. I sound like an Ewok from star wars at 2X.
Even when I am well serviced with multiple vice stop types, hey, it's Joe Pie...
I always learn something from Joe Pie...
So, I watch every video you do,
And I learn, I see, I look behind the scene, stuff.
Thank you, Joe, for sharing.
You are always so helpful and thorough with your video’s you really have some efficient ways of getting the job done thanks for posting so many they always give me more ways to make my work more efficient and accurate!!
Glad to help.
While it is a joy to watch you work the real value is the clarity with which you explain how you approach each aspect of the job. Outstanding!
Thank you for sharing your experience
"so we open the vise and move the part." You are genius. AGAIN, simplicity is elegance. AND THAT IS FREAKING SIMPLE AND ELEGANT. Thanks again. Stuffing that into the mental toolbox. Another JP branded tool.
And less chance of pin flex that way. Glad you liked that one.
Good project Joe, I’ll certainly be making one or four of these. One day I might even make something that’s not a shop tool/accessory.
I know, I know, old video but there are so many wonderful tips in this one that us casual machinists can benefit from that I feel obligated to help the algorithm. Thank you Joe.
I appreciate the comment.
You have helped me so much in this hobby . Thank you for the ideas and tips .
Tried to post a picture in the comments of the one I built from your creation but I can’t figure it out lol .
Glad to help.
I learn a lot today. Very condense. Thank you.
Awesome Design Joe!
Superb...
You never use superlatives.
You always say nice, good, neat etc. That's so good for a dedicated job. Kudos...
Excellent video Joe, I'll be making one of these soon considering I just received a Kurt DX6 vise from a friend who just wanted one of my big bench vises in return 😲.
Thanks for the tip with the Anchor Lube and discoloration. I have found that stuff very useful, especially with stainless.
Cheers
It is, but will turn nice surfaces black overnight.
Dear Sir, You produce some great video content, thank you for sharing your extensive skills with us. Please carry on making these video`s many thanks
I plan to. Thanks.
Another awesome video. Another project on my list. 👍
Wow! So much information on such a small part.
Joe, you are an excellent Master at teaching those of us new to the field how to properly do things well.
Since this apprentice only started 4 years ago (at 70 years of age) I have a lot to learn in a short time.
Thank you for sharing your hard earned knowledge that you gathered through a life long career of taking on challenges and succeeding every time.
Capt. Art
My pleasure.
Educational, fun, practical. I didn’t double-tap a single time to speed the video. I wanted to watch the whole thing. Thank you, Joe, for taking the time to share you great genius!
It was a long one. thanks for hanging in.
Thanks Joe, I will be making one for my 688 very soon.
Its really solid. You'll like it.
Great tip on using a round bar to get close when centering a square piece in the four jaw chuck. Thanks
Saves some fussing around.
Thanks Joe, another masterclass! I changed vices recently and my old stop doesn't fit, you've given me some ideas...
👍 , nice project . Making ones own tools results in a lot of satisfaction. 😊 !
It truly does. This is a great and useful project.
Another excellent video Joe! 😊 Thank you very much
I've built 100's among 100's of clamps, stops and fixtures in my shop including clamps for my production parts that go onto some of my products. After all my years of machining both CNC and Manually I still love to periodically look at your videos. A note for some of those starting out, & doing repeated processes, Get a fat blue sharpie and mark 1 end of your stock (and a small hint of marker on the top surface if you want)so that as you take the part out and reposition it for next step, you always know the way the part went in vice. When you flip a part, & let's say you drop it then you always know which way in sat in the vice. Especially great if you do 1 step at a time for many many many same parts that will have another tooling operation.
Hi Joe
Thanks for another go shop made tool
Excellent video. One thing I did differently is rather than drill and tap the rod that holds the stop, I bored and tapped a cap that fit over it. I then drilled a crossing hole through the cap and one through the rod. This allows me to fit any stop without having to mill a flat to account for any metal deformation on said stop. The stop is put through the cap and rod. When the screw in the cap is tightened it clamps the stop between the holes. Many indicator set ups use this same scheme.
Ive learnt a lot from your videos especially using trigonometry and different set ups and i have to say you're one of the most technical you tubers but ive learnt from another popular CZcams that when four jawing its easiest to tighten the highs losen the lows hence i four jaw a lot of my parts, using that method you do become proficient at that practise and takes no time. btw I'm only a hobbyist but i do make or repair some parts in my line of work being a mechanic and transmission builder.
I'll admit, I have never used a 4 jaw chuck to machine a piece of round stock. Ever. Except for the quick alignment for a piece of square stock of the same size, round stock never goes in my 4 jaw.
Always a pleasure Joe. No stainless but lots of GR 8 bolts up to 2 in.
Wow. What are they Used for?
@@joepie221 I was a logging equip Welder, Fabricator/Machinist for nearly 20 years. The deal was NEVER re-use any fastener.I don't recall any fastener failures over the years Everyone was torqued (even 1/4 in) and of course stretched in the process. The used ones went into 5 gal pails. If you could pack them out the door from 1/2 way in the shop they were yours. I got 5 pails over the years and used many in the machine shop to make all sorts of things. As you know they have a nice carbon content and take basic rosebud (acc/oxy) heating and used gear oil quenching for many tools etc. I am sure I saved thousands of $ over the years. Thanks for the reply my friend. Now in retirement I pour pure silver to keep myself busy. Drop by if you like.Take care eh ! (Yep I am Canadian from N Central BC, LOL)
Tools making tools... the best kind of tutorials. Especially with the blooper at the end. I was kind of wondering if the DTI got whacked...
Joe, Thanks again. I'm 62yrs. old and still love learning, I still have the hammer I made in 1974 High School (2nd project). and later I made a living running Bridgeport clone and made a 3 piece mold from my own drawings, for a Black Powder rifle I want to build someday it will be a 60" barrel .79 caliber (Minnae ball) My machines are small Clausing 8520 Milling Machine and a 22" ctr. to .ctr Chinese lathe but it's "My Shop" I'm gearing up for my retirement in both tools and knowledge. Very few videos get my attention like yours.(Tapping "Like" on every one)
Thank you very much. ( I turn 62 on the 19th of this month)
Job well done Joe, I am subscribed now and your helpful tips are very useful. Many thanks.
Thanks for the sub!
Thx Joe I think I will make a couple of these
Yeah agree with comment below lots good tips throughout. Also by far the best machining channel I’ve seen. Speed is perfect. Too many channels bang on about a load of bolloxs and takes ages to get to the point.
I couldn’t agree more. It’s easily the best machining & engineering channel. And when Joe does do the talking bits it’s always interesting & there’s something to learn. The others just seem to waffle on about inane stuff of absolutely no interest.
In fact, when I see Joe’s put out a long video I’m always more pleased & look forward to settling down to watch it. The shorter ones are still great, but you can’t beat a good hour of Joe Pie on CZcams.
I’m gonna have to make one of these for my little 3” vice. I’ll have to get some steel square stock in, I’ve only got aluminium in square at the moment. Unless I mill some flats onto some round, or get creative with the welder.
advanced thinking great advice & easy to learn. thank you sir Joe.
Hey Rob, Haven't heard from you in a while. Thanks for checking in. I hope all is well.
Good timing, this is one of the things on my to do list. Might use knurled screws so I don't need an allen wrench though.
Knurled screw may not give you enough pressure if you bump parts. Be careful.
Great project. I am working on it now.
Good luck!
You can also pick up center with a pointed tap in a 6-inch scale, balancing the scale on the part and holding it down with the tap in the spindle
Hi Joe,
Just got around to watching this video. Thanks for the shout out. We are delighted you like the boring bar. We are very close to having a 3/4" version available that I believe will be even nicer.
Steve
Steve, shoot me an e-mail please advancedinnovationsllc@gmail.com
@@joepie221 Just shot you an email.
Steve
Stopped the video at 33:36 and ordered a Fowler tap guide. Slowly working my way to have all the cool tools that Joe has!! Also, as soon as I saw the finished stop bolted to the vice I thought why not have the round feature on both ends of the piece that bolts to the back of the vice, it would look like a vice with handlebars and be twice as useful.
Thats a great observation.
Nice collection of vices ;-)
Thanx for uploading this fine video!
Thanks. This one was a bear to edit.
@@joepie221 I can understand you and appreciate your work. I also spent hours on editing my videos.
Beautiful work. We posted this video on our homemade tools forum this week :)
Awesome! Thank you!
@@joepie221 You're very welcome. Feel free to email me at "jon" at our website url, and I'll give you a coupon code so you can join our forum for free and post your videos whenever you want. Looks like you're one of us :)
Hi Joe. Now this is a really nice project & in Stainless makes it super Impressive. I made my stops in alloy, which work really well, but lets be honest they don't compare with your professionalism. Be safe & Catch you on the next project :)
Love it. Off to order some 303.
Joe, Wow that second saw kerf unlosened the stress form that part a couple or three thousands of an inch.
It certainly looked that way on the video. I'll have to inspect it to be sure.
Cool job as always Joe. TFS, G :)
Nice project. I will probably have to modify my vice to have a flat surface on the back of it before I make one of those... Or get a new vice, of course... ;)
Joe thats cool just ordered up some bar stock will let you know how I get on, keep them coming, she,e I don't live near I would never be away lol
I like the approach. Thanks for sharing another great project. I already had a Lipton style of stop, but you had a ton of great tips. If I lived locally, I would volunteer to work for you for free, jut to learn a tiny fraction of what you have to share. By the way, I think Stan is a reseller for Anchor Lube.
No no, I volunteered months ago. I get to work for Joe for free.
Fabulous project
You'll use it a million times.
LOTS of lessons.....thank you
Hi Chuck, Thanks for stopping by.
Thanks for sharing!
Fabulous, sir!
joe ,,, youve done it again ! to un loosen some thing is to tighten it .... keep it up regards from england i live 50 mile or so from keith appleton .. he lives in yorkshire .. i live in derbyshire.. the dead centre of england laurence
Unloosen ? Doesnt that mean to Tighten ? lol I know its a Texas Okie Thing I hear people say that all the time instead of Loosen .Great Video Joe I do like the way you show efficiency in tool changing .
Ey up! Joe nice one i love it,thanks for sharing, I am not sure stainless is the best choice whist its strong and corrosion resistant and (Expensive) it is notorious for tearing and galling on sliding fits and screw threads that are regularly screwed up and undone repeatedly without the use of an anti galling compound. the design is excellent. I will make one and probably use EN24T and O1 rod for the shaft,and maybe heat treat it.
8 years manual machining and never thought to set drill depth with the quill stop, then use the knee. Always calipered the top block to the quill stop.
Its also a solid technique to stop drills from bouncing. Try it.
I place my splits to favor the head side of the bolt hole allowing more teeth for the anchor end. It works fine and I've never stripped threads!
Or use a longer screw?
Nice job!
Simply beautiful!👍👍👍👍👍
Its a nice addition to the toolbox.
very useful.
Great video, and love the digital clock (@@), now a must to0 make one for our shop,,,Great stop also,,Bear
I plan to turn my thermometer into a giant dial caliper as time permits. Like this one. He nailed it. Great job.
czcams.com/video/sZrlWxj9xL4/video.html
Thanks Joe another great build with lots of time saving techniques. Would love to see how you finish the ends odf shortened threads e.g. Setscrews and all thread, I always seem to end up with annoying burrs.
Screw a nut on first, modify the end, dust it lightly on a sander or hard scotch brite wheel and unscrew the nut.
Thanks I must get one of those deburring wheels as you urged to me to in that video about them. Stay safe. Tony
Good as always...
buen video..gracias por tu tiempo
de nada
NICE TOOL, JOE THANK YOU, I WILL MAKE ME ONE. REGARDS FROM THE U.K.
You'll smile every time you use it.