How to replace a group gasket seal on your espresso coffee machine | delonghi dedica ec685
Vložit
- čas přidán 31. 05. 2022
- This video is sharing how to replace a new gasket seal on your coffee machine.
The coffee machine is delonghi dedica ec685
I’ve been used it for over a year.
Hope this video could help if you are having the same problem✨
I’ll see you guys soon for next video
Feel free to follow my ig below
_dwenday?igshid...
#gasketseal #coffeemachine #coffee - Jak na to + styl
Thanks for sharing. I might add that when I made the change I first attached the gasket to the shower screen. This made the alignment simple, and ensured the gasket wasn’t upside down!
Having the same issue. So frustrating. Going to buy new sealing washers now. I know why you keep your hand on the portafilter handle during extraction. ^^
This video is what I asked for but this music is perfect when you want to cut your veins...
Had the same issue, but caused by a too much loaded gasket + the metal filter between... It just exploded while doing the coffee.... Thank for sharing! Will save me a lot of time
thank you so much for this video! it's useful for me
You’re welcome
Thanks for this!!
Thanks for the help! Yes, this happened to me too, using Ali Express portafilter. Although it didnt break my seal, I had to unscrew the grouphead and the put it back.
The same is happening to me using AliExpress portfilter , any solution
@@yassinchelh273 dont use AliExpress portafilter
@@yassinchelh273 change coffee machine. This machine can't handle high pressures, coffee isn't hot enough on high temp setting, pressurised baskets gives watery coffee that tastes off, just bin any dedica. I've seen so many tutorials for so many issues, at this point give up on the machine and buy a similar model that doesn't come with pressurised baskets
I face exactly the same issue, and after sending to service center a few times, their conclusion is because I don't use the original portafilter. I order a new gasket now and hopefully can fix this
So they didn't service your machine at all? Mine is still under warranty and I was hoping they would fix this for me or send me a new one (only half a year old :( )...
That art was not ugly at all. cheers!
Brill! cheers!
Hopefully this will fix my issue. I noticed using 18g reduces the leakage.
Great, thanks
After placing the seal, did you apply anything?
You looked like had a tube in your hand.
I still have some water leaking I think I must do it again or maybe tighten the screw.
Does the same gasket work with the Specialista. It looks the same dimension. Also does anyone know the part number and which is the best place to buy the gasket ring
Nice video bro,you ever clean your machine? Descaling etc.?
Hello, tell me do you need to hold the portafilter so that it doesn't screw out? That's how it is with me, I bought a new portafilter that is not original and if I don't keep it, it flies out. I also noticed that after 3 years of using the device and the original portafilter, when I go to put it on, I don't have to hold the device, because when it was new it was hard to put on and you had to hold it with one hand. I hope that the new head gasket will help.
Hello , just change the new gasket seal will do ya 👍🏾
Hello! I did the same thing for my dedica but it still leaks. I tried alot of dosing already. Did you bought your rubber gasket directly from Dedica? I only bought mine from Lazada 😢
Thanks for the video I am facing the same problem now with just a month usage…sigh😢😢😢
Time for change 😅
Great video, I had the same problem and replaced the gasket but the leaks persist. The gasket is factory made and I am using orginal Delonghi portafilter .............. anyone had the same problem or an idea to fix it.
I replaced the shower head with ics one hopefully does not happen . But from what I can see that shower head is filty hence the main problem.
how the water tank can be cleaned regularly? It needs to be cleaned to avoid from bacteria in it. Is it enough just only rinsing it with water regularly or which other tips can you recommend?
I used to cleaned every week , some people clean every month , it depends
I just rinsing with water 👍🏾
What's the purpose of holding the porta filter handle during extraction? Thanks
Maybe he experienced rotating portafilters from time to time especially when using a bottomless portafilter. Most of us (and even the service center guys) thought it's the gasket but it's the hard plastic that holds the portafilter. Sad it can't be replaced anymore.
hello, where did u get a new gasket seal from? thanks!
Hi , you may get it from eBay or shopee
hey bud.. how'd ya get your portafilter? and from where? i'd like to use naked one for my delonghi too.. thanks!
Hi , you may get it from shopee or ebay ya , just type bottomless portafilter will do, 51mm
@@dwendaycoffee5036 thanks bud!!
@@dwendaycoffee5036 I tried like 3 of those but the locking mechanism was not 1:1 as original has. So there was a poor seal and it would not hold the pressure.
I’m having the same problem now, do you mind sharing where you got the replacement gasket seal ?
Hi, you may get it from shopee or taobao 👍🏾
@@dwendaycoffee5036 Hey..any link from shopee or what keywords do u type in shppee.Tks in advance
@@muhdhakim5296 Hi , you can just type delonghi gasket seal 51mm , it will show you a lot of result ya
bro , if you use this portafilter the seal get broken easily. Try to use the same filter
Hello, thanks for the video. I have the exact same issue, replaced the gasket and again same issue.
I use a non pressurized portafilter and the coffee is not very fine to create that much pressure.
What could be the problem that my gaskets are blown out?
Hi you may try use back the original portafilter
What if screw gets stuck ? It's not coming out i did everything
You may send back to the factory or repairing shop ?
How many grams do you use for a double shot? thanks
Hi, I usually use 18gram,depends on bean, sometime if I change coffee bean I will test few time for the grind size and from 16-18gram
@@dwendaycoffee5036 wow! I only use 13.5g otherwise the portafilter will rotate and becomes loose. I brought it at the service center and they thought it's the gasket but it's new. They concluded it's the hard plastic in the group head that holds the portafilter. Once it lost thread it can never be replaced. They also said that the basket is made out of alloy so it normally melts due to heat so I just bought a new original portafilter and it's quite tight enough but sometimes it just rotates again.
@@ericbee519 I see , how was the end up ?
Replacing the gasket only helps for a short period. Soon after, it's going to fail again.
Hi. Why do you say that?
@@bogdanbuciu2154 you know what - I take my words back. I replaced the gasket several times with no success, but just recently discovered that the portafilter (which was damaged) was the cause of the leakage.
I've discovered the same thing and also the type of Coffee user was causing this. Because the Coffee will swell up due to the fact it was to fine grained. So these are also factors that can cause a leakage.
@@bogdanbuciu2154 I usually put 14-15 grams in a basket (of double espresso), there should be no leak even if it is totally clogged due to very fine grinding.
grazie 🙏