A CNC mini-lathe conversion Harbor freight/grizzly 7 x 14-inch new Mach3 BOB setup
Vložit
- čas přidán 4. 11. 2022
- Video 729 A Roger Clyde Webb CNC mini-lathe build tutorial A CNC mini-lathe conversion Harbor freight/grizzly 7 x 14-inch new Mach3 BOB setup
Thank you for watching
Help support my channel and become a Patron www.patreon.com/user?u=15079773
The Australian Inventors Workshop™ 2022
Sponsored By
Thunder Laser Global
My CARVECO 5% discount code is
ROGERWEBB5798
(ONLY AT THIS ADDRESS BELOW)
store-us.carveco.com/?ref=B40...
Everything @ Banggood DE 2.5% discount
(ONLY AT THIS ADDRESS BELOW)
aklam.io/9Dh0ux
My Fusion 360 20% discount
(ONLY AT THIS ADDRESS BELOW)
Plans and parts listing available on my Patron pages for the, AMAX 3636, MIDI 4040, MAXI 1212, and AMAX 3636 CNC Router, Sieg X2 CNC Mill & Sieg 4 x 20 CNC Lathe + Mach 3.5 Info
WARNING: This/These video/s are NOT SUITABLE FOR CHILDREN UNDER 16! Disclaimer: These videos, commentary, and or advice are intended for entertainment and inspiration for adults over 16 -year-old. Woodworking and metalworking are dangerous. Always seek professional advice and training before using any power tools or CNC machines. If you have any uncertainty before performing any DIY procedure, stop and learn a safer method. Understand, that there are years of learning and experimentation by me that are not in the videos. Do not attempt anything simply because you saw or heard it in one of my videos. You can have a safe, enjoyable, and even inspirational time in your workshop by understanding your own tools, materials, and your own skill level.
I was a cnc turner for 25 years on Fanuc controls.
Never really got into the nitty gritty of how it all worked so finding it quite interesting.
I've gone over to the dark side now and got a Router with Mach3 so still relevant to me in some ways.
Thanks Roger.
I like the motor configuration and the manual handles. Seems like you need to stepper the main motor for threads (or add an aux. stepper motor).
In mach3 c'è l'impostazione dei passi in automatico,inserendo la misura,per esempio 25mm e invio,poi chiede di inserire quanto si é spostato realmente e poi chiede conferma per la modifica dei passi!
Spero di essere stato utile.
complimenti per i tuoi lavori!
Be awesome to see roughing cut and finishing cuts making a (radius) with F 360
I think there's a fault with that board and mach3 roughing cut works well but finishing cuts are way out we have had lots of conversations about this and no one can answer it. 🤔 would love your help. patreon David
Good point!