There are some vids out there with procedures to perform this task, but this video is truly the appropriate way to do it. Maybe I would add, is to put very little soft glue on each one of the 4 holes where the cradle inserts, so you can be sure it will never come off and yet you can perform the same procedure if needed on the future. Thanks for sharing this valuable information.
... and here I was with a screwdriver trying to fit the rubber keypad over the frame not knowing I could just take the frame out as well. Thanks for saving me a lot of frustration. High five!
Thanks, great tutorial, worked fine ! Important: You have to take care when removing the key pad frame, it easily can get broken - especially when there are remains of the old rubber keypad around it.
MERCI c'est grâce a vous que j'ai su changer ma coque, je savais plus demarrer ma voiture grrrrr et j'ai vu votre video dieu merci wontanara Gilbert de Belgique :)
Good video as worked on my Kia Ceed key without the need to replace whole key which was an expensive route. Saved alot of money. Important to grind down edges as per video
Excellent product from FlipKeys, the key instruction is to rub the pins of the case once you remove it to install the new keypad. Otherwise its difficult to push the kepad case back in. Remember that you don't have to do any new fix to the new keypad. Only the case in the key with 4 pins need slight rubbing. Thanks to FlipKeys.
Thank you for this amazing video i was able to change my keypad thanks to this video, the filing of the small tabs on the plastic thing really is crucial else it doesn't go back in. I changed my Xcent keypad.
thanks for this video. it solved my problem for 2 keys and saved me 100's of pounds as i didn't have to buy new keys. the hack to file the hard plastic frame was a brilliant idea. thank you.
Terrific instruction. Take care in removing the keypad frame and be VERY patient in filing the pins. Result is a new looking and working fob. I have a Kia Rio. Thank you... saved a bundle $$$.
Can i know why did you modify the frame? I think you can put the rubber pad on the frame firmly as you did and click the frame back in place without modifying the plastic frame.
Many thanks, This worked for me 👍 Only thing I can add is be careful when removing the cradle .... it's very flimsy otherwise great vid 👍👍 thanks for sharing.😊 Shame on Hyundai for making these key fobs pretty much non repairable unless you know what you're doing.
The key-maker said that case could not be repaired, but i watched this video and easily fixed it. Thank u man!
There are some vids out there with procedures to perform this task, but this video is truly the appropriate way to do it. Maybe I would add, is to put very little soft glue on each one of the 4 holes where the cradle inserts, so you can be sure it will never come off and yet you can perform the same procedure if needed on the future. Thanks for sharing this valuable information.
... and here I was with a screwdriver trying to fit the rubber keypad over the frame not knowing I could just take the frame out as well. Thanks for saving me a lot of frustration. High five!
Thanks, great tutorial, worked fine ! Important: You have to take care when removing the key pad frame, it easily can get broken - especially when there are remains of the old rubber keypad around it.
MERCI c'est grâce a vous que j'ai su changer ma coque, je savais plus demarrer ma voiture grrrrr et j'ai vu votre video
dieu merci wontanara Gilbert de Belgique :)
Good video as worked on my Kia Ceed key without the need to replace whole key which was an expensive route. Saved alot of money. Important to grind down edges as per video
Excellent product from FlipKeys, the key instruction is to rub the pins of the case once you remove it to install the new keypad. Otherwise its difficult to push the kepad case back in. Remember that you don't have to do any new fix to the new keypad. Only the case in the key with 4 pins need slight rubbing.
Thanks to FlipKeys.
I just went from, how the heck am I going to do this, to 10 minutes later, 2 key fobs fixed. You, sir, are a legend, many thanks.
Thank you for this amazing video i was able to change my keypad thanks to this video, the filing of the small tabs on the plastic thing really is crucial else it doesn't go back in. I changed my Xcent keypad.
thanks for this video. it solved my problem for 2 keys and saved me 100's of pounds as i didn't have to buy new keys. the hack to file the hard plastic frame was a brilliant idea. thank you.
Terrific instruction. Take care in removing the keypad frame and be VERY patient in filing the pins. Result is a new looking and working fob. I have a Kia Rio. Thank you... saved a bundle $$$.
Thanks, I wouldn't have had a clue what to do without this video.
Thank you for this video it is amazing, I managed to replace my broken lock button thanks to this video. Thank you for creating it and sharing it :)
Hey there, Thanks a lot. People like you are making youtube a great source.
@Ajman C A sure. I will upload 1 on Hyundai Flip Key fitting very soon
Yes, thats it. I didn't file the pins, I took a very small hammer, a little hit on each pin and it fits, Thank you so much, I did save a lot of €€€
Can i know why did you modify the frame?
I think you can put the rubber pad on the frame firmly as you did and click the frame back in place without modifying the plastic frame.
Thanks, you just saved me 400 euro I would´ve payed in the dealership to have both my keys fixed.
If you are from India, then you may also buy this from us
I have put a link for it in Video description
Many thanks, This worked for me 👍 Only thing I can add is be careful when removing the cradle .... it's very flimsy otherwise great vid 👍👍 thanks for sharing.😊 Shame on Hyundai for making these key fobs pretty much non repairable unless you know what you're doing.
great product I ordered for my i20 make 2011 registred yr 2012.
I did this but I recommend countersinking the holes on the key as well.
Thank you for the good instruction 👍🏼👍🏼👍🏼👍🏼
Thank you, helped a lot!
thank you very much for this video! You are the best! :)
thank you, it's helpful
Thank You very much i did it
Thanks very helpful
Thankyou,👍
Thank you 👍
excellent
Thanks
were can i buy one of those Hyundai flip keys?
I have an I30 in the UK where can I buy this item?
Sir apache rtr180 bike me flip key install ki video banao
It uses ID 46 Chip....
Flip Keys
Thanks Buddy
Worked for me
+Michael Struss Good to know. 👌
Can u do videon on how to change the whole flip remote cover ....
can you convert the no flip key to a flip key?
Yes we can convert most of non Flip Key to a Flip Key
Any way to ship it to Costa Rica?
Sorry for late reply
I feel you should find that keypad locally
I enquires locally and courier alone will cost by EMS about $18 plus cost of keypad $4
whhr can i get ur service in INDIA??
+Vinod Savadi visit us at www.flipkeys.in
get the same one from ebay international at rs 600 including shipping
They a lot easier way
hi
+Bryce Aylward hello from www.flipkeys.in