Chapter 4.1: Understanding G-forces and RPM presented by Dr. Richard Miron
Vložit
- čas přidán 7. 07. 2024
- This video is designed with the sole purpose of providing clinicians a better means to understand centrifugation parameters that will permit the optimization of their centrifugation device irrespective of the centrifugation system and trade names associated. A very clear understanding of the calculations needed to convert revolutions per minute (rpm) into relative centrifugal force (RCF, or g-force) is provided utilizing simple and straightforward formulas.
Understanding Platelet-Rich Fibrin Full Textbook is available for purchase at www.prfedu.com/product-page/p...
Full PRF textbook and Hands-on courses are available at www.prfedu.com/
Over 50 publication downloads available free at www.bio-prf.com/research
Please leave comments below. - Věda a technologie
I have one of the Salvin centrifuges. I am looking in the textbook to see if any protocol recommendations are given.
Do you have these protocol recommendations for the Salvin unit?
Could we just remove content illustrating procedures done using Fixed-angle centrifuges? There's plenty of evidence showing damage to the platelets/leukocytes when using fixed-angle rotors instead of horizontal/swing out.
Yes, it is not a good idea to use fixed-angle. The cells get quite damaged as you eluted to.