Mud Rompage & Getting REALLY STUCK!
Vložit
- čas přidán 2. 07. 2015
- ** Video Contains Explicit Language**
Went for a romp with a couple of friends, good times!
Got really stuck too! (Glad I had a winch!)
Like Fearlessfront on Facebook!
/ fearlessfront - Auta a dopravní prostředky
First time I've watched a 'motorised' mudding video - interesting, particularly since it featured lawn mowers, rather than 4x4s! Very enjoyable!
Got to love a poor mans quad keep up the fun.
I love your videos and thanks. Reminds me of the days I could play in the mud without over doing it. I can still do a little building but I will leave the mud holes to you younger people. I have a few videos posted and wish I had the energy to do more. Anyway, thanks for posting, its still fun to watch others play in the mud.
dude that diesel is sick man, nothing slows that thing down.
Sick romp. Great job on exhaust. Thanks for the video
Great video man, I loved it. That looked so fun , can't wait to see the next adventure , please keep them coming.
Y'all did great. I got really giddy when I seen it was a long romp video.
Love it! Dude we need to get you a snatch block. The winch works so much better with one bro!
yall should check out MOWER OUTLAW.... more of them 2 craftsman
Now that looks like a ton of fun.
Great romp guys!
very cool, and nice job with the exhaust
I thought it was funny when he fearless said " thats how you clear the treads, right there boys."
love that craftsman! ahaha reminds me of mine!
Thanks man love the longer videos
Another thing you can do is strap the back of the Sears to a tree and hook the winch up to the stuck tractor that way you won't have to worry about running out of winch cable
awesome romp mate
cheers
mark
Thanks for the stickers! FearlessFront (Todd Christopher)
Love what the Craftsman has evolved to. The exhaust looks sinister. Thanks for the entertainment!
...I meant the Sears. Craftsman- Sears, I easily get confused!
Awesome, just AWESOME!
Thancks I'm sooo. Jealous to see you and the boys having sooo much fun and I've got to watch it
Awesome day on the trails props to the unlocked making it that far! Hope to see more that's Todd!
***** Thanks man! he did pretty good considering
+FearlessFront (Todd Christopher) does the diesel run longer on fuel?
Keep it up looks very fun!
Hey Fearless, got a couple questions for ya. Where did you get the pulley for the transaxle on your Murray? The one you showed that had the key way in it that would fit the input shaft on the Murray, and where did you get the diesel motor for the Sears?
Awesome 🚜🤟🏼
that was an awesome romp.
I think the Sears needs more turbo diesel.
That would be sick but I think it's got enough power already
Frickin awesome!
Nice! That sears had little trouble im thinking of building my own.
Awesome romp
great ride along!
awesome fearless!!
so i got a old craftsman with stock 23-10.5-12 and i want to know if i can put 25-10-12 on my stock rims
Some badass machines
I have a mtd lawnflite 11.5 hp which is coming 30 yaers old whats a good upgrade considering i live in ireland where rust is a problem. Is castle garden a good option?whih a 12 hp brigs?
HEY TODD! I just want to give you a big THANK YOU for the stickers man!!! My Ranger has a sticker right over the sliding window in the rear and it looks SICK! 😎😝😉😊
Looks like DEEZ NUTS has left his mark on one of those tractors. hahahaha.
best mudding yet.
Happy 4th love your new video
Fun times right there.
Dude i love you vids!!!! Awesome rides!
Brandon Gaskins Thanks man!
Good mud rompage video!
How fast is the sears and the offroad mower? On the highest gear
What's the winding noise in the sears?
that was awesome u never get stuck u met your match congrats
When you stick the sears, you've done something. It can be stuck, but you gotta work at it.
awesome run
Your videos are awesome
You guys are crazy going through that on 2WD mowers. Love it though!
deckedouthemi I've had a couple of ATV's and truthfully I rarely used the 4WD in either I was surprised where they would go in 2WD. Having a winch is a great accessory and something to anchor to LOL.
freaking awesome!!!!!!!!!!
Fun is what it's all about, aww-some !!
I love your vids bro I subscribed to you
Awsome romp!! Got your stickers today, Thanks. Your Dedicated to your fans. I'll send you a link for the vid of the sticker being on the rear bumper of my tank when finished, lol.
***** Awesome man! sorry for the delay!
I like the new Sears exhaust! The stack had the cool factor but it wasn't practical! Between blowing coal in your face and getting hung up on brush it needed to go!
Hey @fearlessfront what happened to the lifted mudding mower you had
hey i live in brooklin maine
and i love ur mudding mowers
Thank you for the stickers!
"Don't tell me the belt fell off again , hey I think the belt fell off again , oh no." Lol pretty funny I thought
Jake Waters lol! I thought so too!
FearlessFront (Todd Christopher) is the pearless 820 a 5 speed transaxle?
I asked you not to tell me that. (ala Get Smart) lol
man, that sears would`ve really been awesome if you could`ve put a small Yanmar diesel on it. the one you got is a Chinese yanmar clone but a lot cheaper
What do you mean by locked transmission what does that do
On your Murray how did u make the shifter like a quick shift
What seemed to do better the mud lites or the bear claws as far as grip not considering one being locked vs the other not
Hey fearless, I'd like to see this sick thing go to the pulls. just for a stock class but just to pull. or whatever class you can get it. I'd like to see it!
Dirty awesomeness👍
that looks fun
Good vid
They run real good try opening the fenders on the one with the close tires, and the rest is historical !
Well great romp wish I was there with my sears suburban 12 dually long hall from Michigan
Todd also like to ask what you think of the sears suburban 16 with gx690 motor on it did you see the videos?
Matt Blankenship That should have plenty of power. Mine will bog a little bit in really deep mud if I am in 3rd-hi, and thats a 10 hp diesel
I have a question for you where did you buy your clutch for the side by side build
Jack Gizerd here: www.bmikarts.com/Torque-Converters_c_215.html
YEAH DID IT HEALLA badass style
Ya man bout time you start using that thing
But your mower is awesome and the videos you make are awesome
Question. Would it be a good idea to switch those belts and pulleys for chains and sprockets? No slippage in the water then right?
Mo cause then the clutch wouldn't work
On the craftsman and that camo tractor, it wouldn't work. But the sears has a horizontal engine and if fearless had a problem with slippage, he could run a jackshaft near the dash with a belt off the engine for a clutch, and a chain going back to the transaxle. You could probably do the same with a verticle shaft engine tractor, but the problem would be that when you get hung up on rocks and mud and stuff, belts bend. Whereas a chain would bind and actually force itself off the sprocket or break. And then you're sol. If lawn tractors had an internal clutch it would be a great upgrade, but since the clutch is just keeping tension on the belt, it wouldn't work. Not a bad idea though
hectorisdaman154 A properly setup belt system shouldn't have any slippage. I can run either one of my tractors belts underwater and they still grab fine.
BackRoadBomber true
it was good I like it a++
How do your belts not slip when there wet ?
Do you still have the Craftsman crawler and would you ever consider selling it ???
When can you start the build on the new shop you have talked about building.
Is the sears still locked
it was awesome
Are the places you romp on private?
Can i change gears on my tractor when i drive if i have the brake disconeccted?
Yes you can
hey what would happen if I put a 9 inch pulley on they engine and a six inch on the transmission. I have a 19.5 Briggs twin cylinder turbo cooled engine on a Murray lawnmower it originally had a 12.5
+Thomas Eltommo i think it would work better if you put a 7 inch on the engine and a 4 inch or something on the trans side, that way it will fit up in there a lot better and you may not have to cut anything
best one in 15 so far, winches are great
George Gardinier It was a life saver!
Hahahah scariest part of the day lol ..... Don't pull a rex4x4 hahaha
Rex4x4 exactly what I was thinking! lol
วววยรึคตตจร
ฝปผผผ
FearlessFront (Todd Christopher) have you ever thought of putting dual wheels on the back of the Sears, so it can get more traction
can you show us how to take of the blades off of a mower
Hey guys that looks like so much fun is that someones property that yiu go to looks purpose made with the little bridge and just the layout looks like someones put some effort into making it what it is. Would love to have something like this on my property
hey todd...... we need to do that again..... I may lock that 820......
The sears sounds way more bad ass with the new exhaust!
Still sounds better LOL!
Ryan Losinger it probably sounds different because I am using an wired mic with the go pro.
You've inspired me to make myself a mud mower, I'm currently working on a older craftsman 6 spd with H/L Kohler command 22.5hpvtwin, but I'm having trouble with it, seems like it wanting to choke out any tips? Currently I'm replacing Air filter, fuel filter cleaning carb and blowing our gas lines
FearlessFront (Todd Christopher)
Logan McDonald You may have to resort to getting a carburetor kit and doing a rebuild on the carburetor. Sometimes just cleaning it won't work. Check all your linkages and make sure everything moves freely as well, if you get something binding it may not allow the choke to be completely turned off or on, as well as throttle may not work properly either. You'll also have to adjust the carburetor once you get everything going most likely.
Fearless what application do u use for the top speed runs
Bmxpro Paul I think it's called DigiHud
Ok
Does it go and when ur not moving it go up
If he went with a centrifugal clutch he could still use the chains and sprockets without slippage
LOL "Watch out frogies, your gona DIE!
Fucking awsome Budd. Best video in a long time. The exaust on the sears looks funny now though. Just my opinion. I almost have my YJ done, then I will be able to get back to my Sears build finally. Pretty excited to get her on the trail!
hopaktruck yeah, I still have to tweak it a little bit, it sticks out the front too much. I just modded it that morning so I didn't have time to finesse it
FearlessFront (Todd Christopher) Yeah thats what I was thinking. I could see you catching that on some stuff the way its sitting right now. I'm sure you'll think of something cool though, you always do. Looks like it was a blast of a romp though!
I have Craftsman with a 820 with 26x11x12s it works pretty well
hey fearless front i have got a sears craftsman 6 speed what would be the best way to get it going about 20 25 mph
Brandon Moore a 5 inch engine pulley, and a 4 inch trans pulley. but if it's a craftsman, you'll probably have to re-locate the clutch back a little bit. the sit really close to the engine pulley
Well thanks man where would be the best place to buy those pulleys and I'm gonna do a complete tear down this weekend
FearlessFront (Todd Christopher) man my craftsman tractor has a weird pulley setup
My pulley goes from horizonal to a vertical transmisson pulley
Brandon Moore my brother has one of those
high centered the diesel would also like to point out that the sears weights like almost 2 times the other two tractors
+George fulmer very true!
time to build a gopro mount for the sears
Trapper Berard yup!
What goPro did you film with?
do you ever wiry about the gears getting mud in it?
that is why the transmission has seals on it
Sweeeeet...
if yall can do this with modded trackors... gives me confidence in my 2x4 250 polaris trail boss!