Diesel Sears Trail Rescue Rig
Vložit
- čas přidán 3. 06. 2018
- The Sears proved to be an INVALUABLE asset on the trail. It seemed everyone needed some help at some point! The Diesel was up for the challenge.
Check out the channels of the people I rode with today:
Lucky Mud Mowers:
/ @lucky7mudmowers
Mower Outlaw:
/ @moweroutlaw
Rob S:
/ chefinitup4u
-----------------------------------------------
Like my page: / fearlessfront
Email: fearlessfront@yahoo.com - Auta a dopravní prostředky
Thank you very much Todd AKA fearlessfront for having me up there awesome ride catch you next time
Lucky 7 Mud Mower's you did do ok this time
thanks
It's a good day when you see fearless front uploads a video
indeed
My day was bad we ran a jeep in a big hole and get suck and then it gets to be a good day and then he up load
Fearleass? Upload? I dont think so! Hes probably busy with his kids. He has a life you know! Much love fearless!
You said if you loved the video to give it a thumbs up.... My son and I just watched it and as soon as it ended he put a thumbs-up to my phone hahaha
Best seal of approval ever. :)
aserta .... hell yes!!!!
Mower Outlaw you did awesome
Craftsman Crusher ......thanx..... are you a subscriber of mine?
Yes I am
That was awesome guys. You all were having way to much fun 👍👍👍
Don Raabe you can never have too much fun lol
Thanks
Love your diesel man, unstoppable..my 1966 Ford 100 is same, repowerd with 18hp gas 27inch Barclays tires..wish it were a diesel though..love your vids keep it up brother maineah
Bearclaw tires lmao
Mowers are more fun than quads, something about taking a vehicle that wasn't necessarily meant to go extreme offroading, extreme offroading, is inherantly awesome and fun.
Weird, I just started watching your old videos again and now you upload a new one. Good to see.
I have a mower and I'm trying to get it ready for mudding and pulling so this is helping me with stuff to upgrade and things to add. Thank you for the awesome videos and the great ideas!
😊
Realy great video! Mike's machine did very well aside from the electrical issues. Bruce as always was entertaining, Rob will get that rearend fixed, but his machine did fine before the breakdown. Your Sears is an amazing thing,...what a beast. Outstanding footage! Need a Fearless decal)
This video was about all I needed to go fire up my craftsman. Trans locked up last time I rode it, need to take it apart and figure out why, and I may go through some of your videos for reference. Looked like a fun run for you guys!
Another great video guys!! Looks like so much fun! Can't wait to see the next one!
Great ride as always good to see the diesel working again.
Enjoyed your latest video Fearless. Hope there's more to come soon!
Glad to see ur back
codie nestell can't really do mudding here in Maine in the winter,and our Winters are screwy here
Great video!
Awesome video fearless
Where is the quadractor?
Love your videos but would love to see more of them
Awesome video.
That lucky mud mower sounds fantastic
Great video fellas you guys were ripping.
So fun to watch!!
Great vid Todd!
Yes sir!!🤘🏻🤘🏻 let it eat!! Awesome fun guys.
Man these are some great mowers
i kind of half way expected to see a fish come outta those boots ;-)
Great video
Nothing but swamp country, I like it.
freaking loved it man
Great to see more vids man👌👌
Where's the quadractor?
The most prized item on the mower trails of Maine must be...a pair of dry socks.
Awesome video!
I need one of those machines, and friends with some, and somewhere to ride them, and.... Ah, never mind, I will just watch and enjoy the videos...
welcome back boys
Nice country ride, awesome rides, swell riders :)
And bitchin' Diesel Monster Sears trotting around with impunity :)), ah, love that machine, you couldn't put a smile on my face wider than when i hear it.
That sears is one bad ass tractor
I miss you guys please start making videos again soon you guys inspired me to start mudd bogging with lawn tractors it's sad you have made a video in a while I hope you all are happy and healthy and hopefully for the future
Myself I haven't had much time to make videos myself don't need or want to get into the sorted details let's just say life got in the way but I just picked up something 🤫and I'll be coming back to the world of offroad muddbogging in a big way
Also great video!
Thats Awesome cool video what a tank😂
Clutch sounds like a train whistle 13:46
Thanks for the upload and would like to know when the next video will be up thanks
Nice vids in process of building a few till demos come
Good video
Your back!
You guys have to much fun
That vtwin sounds almost like a harley lol
Yes!!!!! more tractor mudding I have missed this
Alex R ..... if you want to see more go check out MOWER OUTLAW
It's about time you posted a video! Seems like it's been a long time!
I love this.
H*** yeah a great video looks like you guys had a good time. Plus I got to see the shot that I knew you recorded and it was at the very 1st of the video. That was lucky going to that big mud hole when it sounded like he was run in 10000 RPM. With an O valve float lol.
Good job man your bad ass at this I'm new at it and i watch your videos to learn my son is 11 years old and he loves your videos he calls you the man of mowers lol
Greatjob on the videos hay some get on lucky7 mud mower live stream
Decent ASF!
bad assssss
LoviN ThE BLoG!👊🏻💪🏻💪🏻
What's your pully set up on the Murray Lake in inches
Hell of a day man
Hi todd I have a question on a transaxle, a peerless 930-054a. Are theses strong enough to beat on like a mst 205 ?
If I had the money I would go down to Maine with you guys. It looks like a lot of fun. But the engine my mudding mower isnt fixed yet. But nice vid
i'm getting a Simplisty 5116 special mower and want to make a mud mower any advice or help
Which do you think is better? mud tires or tire chains on stock turf tires. I am starting an off road mower project and am wondering which i should do.
What in the fresh F***? Hilarious
been watching your videos for a while now and never noticed any to have wheel weights while mudding. I run wheel weights when I'm trail riding because of uneven ground and wet rocks/logs. but would it be easier to be mudding with them on or off? I've done it both ways I'm not sure which is better for mud. any ideas??
Love the very first mower! How did he bypass the governor on the throttle?
You need a hat like Mower Outlaw!
T.J. Boismier and witch hat would that be?
the one with the Confederate flag, of course!
That's a rebal flag...... a true confederate flag is mjch differant
The original stars and bars is a circle of stars and 2 red bars and 1 white bar. Afterward we had the stainless banner, which was white with a "rebel" flag in the corner, and then the blood stained banner, which was the same with a white stripe. The "rebel" flag was the flag that the Confederates used in battle.
i wish i had a way to get to maine, show you guys what Dinky do(dinky is my muddling lawn tractor build in progress. a small motor swapped late 80's crafstman with a 9" pully in the front)!
RockeyDAproductions same
Hell yeah!
Braaaapppp!!!!!
mikes hobbie's and random stuff yup 😉
I dont know if yall are close or not but you should do a collab with Red Beards Garage! they dont really dabble with tractors, it would be cool to see like a a built offroad kart vs. built mud tractors
im in
Off road go karts aren't really suited for mud use at all though and traxtes generally aren't as fast as karts so you couldn't do a fair comparison
All terrain Lawn tractors and more idk man fearlessfronts Murray build was pretty damn fast. And RBG is building a big offroader with a 670cc on it so maybe with some good tires it could hang with the boys
They aren't close at all.
pogosticknick I doubt the go kart could do the mudding. Not enough ground clearnece for the ruts. Need fdar bigger tires than RBG usually runs. A collaboration video would be cool but there tractors and go karts are two complete different beasts
You gotta put an inline 4 honda civic engine into a tractor of sorts. You could make it 4wd if you put differentials on both ends and lock the transmission differential. Thing would haul ass through the woods all day long
Next video...2 years later lol jkjk nice video for real bro.
Nice to see a new vid:) Me and a friend talked about your videos 2 days ago! Do you have any suggestions to make a stock lawn mower run faster?
amazing
I need to come up there and romp with you all
how do yall make belts not slip
shyt i woulda jumped that bridge!! Ol bruce is a good guy aka mower outlaw
Should just call the Sears a tow tractor lol
Todd are the Coney roaders mud runs open to the pulic?
+Весело покатались!
Glade you making vids ahain
When can we expect a update video??
I need to get myself a horizontal diesel engine. I've got a gt6000 with a vertical shaft Briggs vanny and I'm tired of the stupid belt twist. I put a new engine pulley on(8in) that was only slightly off center and because of the belt twist, I shredded 5 belts in 4 days. That, or I need a horizontal opposed, rather it be Briggs, but I'd run a Kohler or a Onan if I got my hands on one. Great video tho, that diesel is a power house for sure
Do you guys ride on public lands in Maine?
What year is your sears?
looks like Castle needs some belt guides
you should add a second par of tires on the back of the diesel sears. It would be more stable and get more traction.
Lol good times 👍
Mud king Rules!!!!!!
Can we have an update on the murray
Hey man I have a few questions I have a John Deere 140 I have some issues with the spark plug could you help me out?
Could you show how to get rid of play in the steering? I am working on doing a pulley swap but my steering has play and it is hard to steer when I am only going 7 mph. So I don't feel like loosing control when I am going much faster
Ok brother it’s about dang time ahh shi and the gangs all here Greta to see ya back at it agian see now this is the motivation I needed to finish my Murray AWSOME job FEARLESS that’s what’s up and that deisel still killin it out there 💪💪💪👊✌️👍💯
Do you use kevlar belts?
Yes, at least I do
i had a spicer transaxle do the same thing it lost all foward gears and i then i sent it in reverse untill that stopped working. swaped in a mst206 never had a problem again
R u still making more vids
When is the quadractor coming back
Me and my buddy are romping with mowers on his dads property in nobleboro Maine
Whatever happened to the craftsmen Crawler?
Fearless I have a question. I have a 03 mtd lawn fleat and it doesn't have that stuped cluch thing on it but in fact it has the same diff as your Murry I want your opinion on if it will be a good mud tractor if you look in my channel the newest video is my riding it if you want to see what it looks like. Skip to 4.55 to see the tractor
Updates on the Murray