Hey brother thank you very much for that heart felt comment! I appreciate your support to both sides of my channel! No glory for me ALL to God is right my brother in Christ!
The Rovan 71cc has the same issue. What I do is machine the back of the clutch shoe holder, but I do use the fan type holder, but it's machine for more clearance and you can put the engine seal in the correct place ,not against the crank bearing which cause drag, Taylor makes the perfect clutch housing to 32cc to rovan 71cc, it's more open for cooling and it will fit 62mm clutch!. Yes I can see that taper problem, common rovan problem that you have to watch out for. Keep up the good.
Yup I totally agree bro and I sure wish I had a lathe It would be so handy many times in my mechanical life LOL! Taylor makes great stuff period Im a huge fan of Mike and his products!! Thanks for taking the time to watch and comment brother!
Your stuff is so much cleaner than mine 😮 ! I was watching some videos and being a service tech for the last 40 years my question is tools. Being the Jesse James of bajas can you do a video just on your tools? Like mostly the specific ones just for baja. Tools most guys wouldn't think to get. Thanks for all you do, look forward to the next time.
Well thanks Matt I appreciate that bro! I can certainly do a video on my tools. 🛠️ I dont recall ever doing one so I certainly can. And if my stuff is all dirty I usually always clean it first then work on the car . This car here I not long ago tore it fully apart and cleaned the heck out of it and changed some parts. Its only been down my gravel road twice and through my yard since its full rebuild so its barely dusty at the moment.
I got a Rove in 45 XLT after my best friend passed away his son gave it to me. The truck maybe had three tanks at the most ran through it. We couldn't find the receiver so I bought a new one paired it up put it on the stand fired it up and as soon as it's running the clutches stuck engaged. Luckily a guy off the Facebook Rovan XLT site sent me a brand new clutch kit for free. I've never worked on one of these I've only messed with the brushless so I'm a little hesitant because there is no videos on the best way to do this and I'm hoping that the clutches just shot or gummed up from sitting either way I have the brand new clutch kit any pointers. Someone said to pull the motor there's four bolts
Hey bro, I have plenty of videos on how to take that clutch apart. I have a specific Roven 45 video of what to do with that clutch one of my recent 45 videos shows just how I take it off and put it back on. I hope that helps you brother.
Thank you EastSide RC ! I am in France and I want to be sure to order all the parts well so that it works well before ordering my Rovan baja 45cc from FearlessRC. Continue like that you explain very well and everything seems simple when I look at you! And I’m sorry for my bad english (use google trad) 😅
Greetings from the USA! 🇺🇸 thank you for the comment ! I appreciate you! Its okay about the english its a very hard language! I cannot speak any other languages except for a little Spanish. So I understand its hard.
Happy New year brother Robert! 🤝 yeah the ole needle nose save a lot of time from having to take the whole other side apart because I dont use piston stoppers never cared for them
Thanks for the info, I’ve been watching all of your stuff, when you said the xlt450 was the best 1/5th platform it got me looking into the rovan 45cc. I’m honestly at a toss up between wanting the rovan Rf5 rally, the xlt 450, the LT450, or just a 30 DNT.
Alright alright, well now I know what I should get into the 5th scale 2stroke game with. I appreciate it. Good on you for your sobriety, if your Sunday service and devotion to God keeps you on the right path, well then carry on. I’m scrolling through all your videos watching the crap out of everything. Beat it n seat it has got to be my favorite phrase!
Nobody here in the US has the dirty 30 with that 38cc in stock or a roller version. How is that 29cc motor, any good? My choices are the stock truck with a 29 or get a roller from the UK and get the 38 separate. Let me know , it’s my first truck and I’d rather be happy in the long run. I know the stock pipe sucks, so whatever motor I get the stock pipe is going away.
Hi ! All those who have Rovan Baja 45cc, the buggy comes with differential oil, shock absorber and air filter. Is the buggy delivered without oil inside the differential and shock absorbers? Or Is this for the Mechanical overhaul later? Thank you !!
Yes but its garbage and should be changed! The diff is junk the gears are good the case is trash. First thing I do with new bajas is take them all apart and build them right! The chinese use all the wrong fluids , loctite , no loctite the most consistent thing with Chinese stuff is the inconsistencies so just go over it really good. Dont use any of the oils that come with the car , they are no good or too thin. I throw all that away lol.
@@eastsiderc Exactly lol ! They better sell them as a kit, yes I find that the oil is very fluid. What grade should be put for suspension (300, 500, 650, etc.)??
Too God be the Glory thank you Jeff for all your support in the RC Hobbie your a great Guy🤘
Hey brother thank you very much for that heart felt comment! I appreciate your support to both sides of my channel! No glory for me ALL to God is right my brother in Christ!
The Rovan 71cc has the same issue. What I do is machine the back of the clutch shoe holder, but I do use the fan type holder, but it's machine for more clearance and you can put the engine seal in the correct place ,not against the crank bearing which cause drag, Taylor makes the perfect clutch housing to 32cc to rovan 71cc, it's more open for cooling and it will fit 62mm clutch!. Yes I can see that taper problem, common rovan problem that you have to watch out for. Keep up the good.
Yup I totally agree bro and I sure wish I had a lathe It would be so handy many times in my mechanical life LOL! Taylor makes great stuff period Im a huge fan of Mike and his products!! Thanks for taking the time to watch and comment brother!
Looking forward to Service Sunday 🤘
Man brother I am too! Im glad the Lord laid this on my heart! Its going to be rather bold id say.
Still stuck in 1/10 scale land. Looking forward to your faith episode. Probably going to check it next Saturday.
Sounds great thanks brother ! Rc is RC is still fun and 1/10 is much more affordable thats for sure!
Always great tips 💯 Hope you and your family are all good, I'll be watching the Sunday Service!!!
Brother Andy always leaving great comments! Thank you my brother in Christ! 🙏🤝I hope you and your family are having an awesome weekend too bro!
Great video Jeff. Out of all the testing the the 45 I have done I have never thought of this 😳. Thanks for the heads up
Yessir Part 2 tomorrow finalizes the clutch situation! If I only had a lathe lol
@@eastsiderc I say that all the time 😂. The case on mine is bigger than the seal by a few thou. I had to spike my case to get it to stop
Your stuff is so much cleaner than mine 😮 ! I was watching some videos and being a service tech for the last 40 years my question is tools. Being the Jesse James of bajas can you do a video just on your tools? Like mostly the specific ones just for baja. Tools most guys wouldn't think to get. Thanks for all you do, look forward to the next time.
Well thanks Matt I appreciate that bro! I can certainly do a video on my tools. 🛠️ I dont recall ever doing one so I certainly can. And if my stuff is all dirty I usually always clean it first then work on the car . This car here I not long ago tore it fully apart and cleaned the heck out of it and changed some parts. Its only been down my gravel road twice and through my yard since its full rebuild so its barely dusty at the moment.
Awesome video, looking forward to the next video. Stay safe and have a great weekend
Appreciate ya woods. Its all loaded up Ill drop it in the AM! Hope you and the fam are having a great weekend as well
Thank you for this valuable information. You are really a professional.
Hey man you’re very welcome. This is my favorite hobby.
I got a Rove in 45 XLT after my best friend passed away his son gave it to me. The truck maybe had three tanks at the most ran through it. We couldn't find the receiver so I bought a new one paired it up put it on the stand fired it up and as soon as it's running the clutches stuck engaged. Luckily a guy off the Facebook Rovan XLT site sent me a brand new clutch kit for free. I've never worked on one of these I've only messed with the brushless so I'm a little hesitant because there is no videos on the best way to do this and I'm hoping that the clutches just shot or gummed up from sitting either way I have the brand new clutch kit any pointers. Someone said to pull the motor there's four bolts
Hey bro, I have plenty of videos on how to take that clutch apart. I have a specific Roven 45 video of what to do with that clutch one of my recent 45 videos shows just how I take it off and put it back on. I hope that helps you brother.
Thank you EastSide RC !
I am in France and I want to be sure to order all the parts well so that it works well before ordering my Rovan baja 45cc from FearlessRC.
Continue like that you explain very well and everything seems simple when I look at you!
And I’m sorry for my bad english (use google trad) 😅
Greetings from the USA! 🇺🇸 thank you for the comment ! I appreciate you! Its okay about the english its a very hard language! I cannot speak any other languages except for a little Spanish. So I understand its hard.
Happy new year! I like the needle nose pliers holding the clutch trick! 🤝
Happy New year brother Robert! 🤝 yeah the ole needle nose save a lot of time from having to take the whole other side apart because I dont use piston stoppers never cared for them
looking forward to the next vid my man !!
Thank you ! Its all loaded up and ready to fire 🔥! Ill drop it in the morning!
Thanks for the info, I’ve been watching all of your stuff, when you said the xlt450 was the best 1/5th platform it got me looking into the rovan 45cc. I’m honestly at a toss up between wanting the rovan Rf5 rally, the xlt 450, the LT450, or just a 30 DNT.
Out of all those the 30 degree north is the best one and the 38 engine is better than the 45 too.
And you are welcome brother. Thank you for the support I appreciate it.
Alright alright, well now I know what I should get into the 5th scale 2stroke game with. I appreciate it. Good on you for your sobriety, if your Sunday service and devotion to God keeps you on the right path, well then carry on.
I’m scrolling through all your videos watching the crap out of everything. Beat it n seat it has got to be my favorite phrase!
Nobody here in the US has the dirty 30 with that 38cc in stock or a roller version. How is that 29cc motor, any good?
My choices are the stock truck with a 29 or get a roller from the UK and get the 38 separate. Let me know , it’s my first truck and I’d rather be happy in the long run. I know the stock pipe sucks, so whatever motor I get the stock pipe is going away.
Great tech tip I have 2 Rovan 45cc 🤘
Awesome brother well this can help you out! I think you will like the next tips for it as well! 🙏⛽️Happy Brappin for everyone thats all I want!
Great tip brother.
Thanks my dude!
Another great trick tip 👍
Yessir thanks bro! I dont have any major machines so these tips are for anyone!
Great tech tip thank you
You’re always welcome!
Great video....
Thanks brother Robert
👍👍👍👍👍👍
I love you mom!
Hi ! All those who have Rovan Baja 45cc, the buggy comes with differential oil, shock absorber and air filter. Is the buggy delivered without oil inside the differential and shock absorbers?
Or Is this for the Mechanical overhaul later?
Thank you !!
Yes but its garbage and should be changed! The diff is junk the gears are good the case is trash. First thing I do with new bajas is take them all apart and build them right! The chinese use all the wrong fluids , loctite , no loctite the most consistent thing with Chinese stuff is the inconsistencies so just go over it really good. Dont use any of the oils that come with the car , they are no good or too thin. I throw all that away lol.
@@eastsiderc Exactly lol ! They better sell them as a kit, yes I find that the oil is very fluid. What grade should be put for suspension (300, 500, 650, etc.)??
Thinking about a new engine. Would you prefer rovan 45 or taylor 35 reed?
Taylor Reed 35 for sure!
😮
Hello, is this a issue with all Rovan engines? I have a KM 30.5cc
No sir just the 45.
@@eastsiderc ok cool, tnx for the reply and great content 👍
Chinesium 😆 🤣
😂😂😂