Hello. I got it from elsewhere. I just bought. If I put it next to the wifi transmitter, its battery will run out within 1 hour if its sound is constantly on. What do you think about this? It didn't seem normal to me that it was over so quickly.
Of course the battery will run out fast because its constanly detecting the wifi signal and using up the battery. Its ment to detect and find hidden divices, why do you need to put it next to a wifi transmitter when you already know the transmetter is there?
Lol. A more descriptive explanation other than hand modeling the operation manual could go something like this... You turn the sensitivity down just barely below displaying a light on the meter. When you are closer to the potential spy device and max out the led meter you turn it down more. This allows you to zero in on the potential device. The laser camera viewer is pretty on point but if you hold the button down you can control the flash speed. This comes in handy if there are outside light sources or possibly a motion detecting camera with a shutter possibly. That I would like to learn more on if you've figured that out.
@@nice2tradez56 I did. I've had this same device for a while now and because of the not so instructive instruction manual I've been learning from youtube mostly. I saw probably 5 videos before I ever learned about the flash speed. Do you know if there is any way to amplify the power on these? I am considering experimenting since they aren't expensive but would rather find out other ways.
@@nice2tradez56 thanks for your reply but the sensitivity is down also it’s giving me full signal outside in the street it could be mobile network interference with the divce.
Yes could be also because any EMF can set it off. The sensitivity can be adjusted at a lower level. But for the video demo i need to set it at a decent level to show it.
It means that you got allot of electronics running in the room or area. Try to turn of TV, Radio, PC, Phone, Wireless CCTV, or any devices that gives off Electro Magnetic Frequncy and try again. Please subscribe to my channel so you wont miss new uploads. Thanks allot 😊
I'm just testing the battery of my new cc308. I'm trying to figure out if it's the same as other cc308s. So if yours is near wifi, will it be over in 1 hour?
You can charge it for 4-6 hours first to get full charge before trying. Normally people dont leave it on a wifi that long. People just use it for 5-10 minits only, to check for spy devices in a hotel room
mine sometimes works sometimes doesn't , battery still got charge. Last time it was able to detect but right now it can't , i tested it with mobile phone both on standby and in use
@@nice2tradez56 Thank you for your reply. I am trying to find my temperature/humidity sensor which broadcasts at a frequency of 917 MHz. Someone has moved it from the (outside) location where I placed it. It is still broadcasting its signal so it must be somewhere in the area, but I have been unable to find it. I bought the detector in the hope of being able to detect its location, but there are too many other radio signals of various frequencies in the area.
Just bought it and try out. Totally useless and in the arrangement send it back for a refund. Look closely the way this guy tried to adjust the device doesn't make any sense at all. Look how difficult was the adjustment and don't confuse by the demo look closely again many times the device simply doesn't react to the phone signal. Pay a little bit more and get a more reliable one.
All the detector works the same, its just a EMF signal receiver, like a FM radio, you need to adjust the dail to tune into the correct sensitivity to get the optimum results. low cost or more reliable one works the same. You need some getting use to the adjustment of the detector and position the detector to a suitable distance to pick up the EMF frequency. When the phone is on standby mode it won't give out any signal or very weak signal, so it makes it harder for you to pickup the signal. if the phone is ringing, downloading, sending and active usage you can pickup the signal easily. In the video i demo on a standby phone that is why its harder adjust the dail to detect the weak signals.
The radio frequency detector works fine.... Justput it on low frequency and if there's any change in the radio transmissions of the device you are trying to detect, detector will pick up by fluctuations in the sound. Tried it with my phone... When i forwarded or paused etc. A youtube video the detector picked up changes in the radio frequencies and the sound fluctuated every time there was a change
If its a wireless camera it will give out EMF signals. You can use the detector to picup the signals. If its a wired camera you can use the red filter light to look for the camera lens refection. Thanks for watching Please subscribe to my channel so you wont miss new uploads. Thanks allot 😊
can anyone help me have cameras and 2 way listening devices in my home am in uk I need to locate and disconnect can a electrician find them or do i need a bug sweeper
You can ask a electrician to find it, It's easier to find it If you have a detector. Please subscribe to my channel so you wont miss new uploads. Thanks allot 😊
krpaya sameeksha par any veediyo sameeksha dekhen ki yah kaam karata hai ya nahin. agar aap ise khareedane ka jokhim nahin uthaana chaahate hain. aap kisee aise mitr se poochh sakate hain, jisane ise khareedane se pahale aapake lie 1 prayaas kiya ho. yadi aapake mitr ke paas 1 nahin hai, to aap apane mitr se pahale ise khareedane ke lie kah sakate hain taaki aap pareekshan kar saken ki kya aap jokhim nahin lena chaahate hain.
yes you can. as long as the bugs is transmitting signals. if its on standby mode or off, its quite hard to detect it because there is no signal coming from it. Please subscribe to my channel so you wont miss new uploads. Thanks allot 😊
The detector is use for detecting wireless device that gives off radio or wifi signals. If your cam is a wired one you won't be able to detect it because there is not signal coming from it. You can use the red filter and light to find the reflection from the camera lens.
It does the job and works fine for the price. Either you don't really know how to use it yet or the price you bought is relatively high. This model is quite cheap detector. If this model doesn't match your requirements you can look up K18 model.
@@nice2tradez56 look at 5:20 her finger turn a wheel and there is a red light, theres no detection she just turn a wheel. Now look at her finger at 5:45 there is no detection because she dosent turn the weel. U can just make song and red light by turning the wheel, this is fkng scam
Already written there in the text you need to adjust to a optimum sensitivity to detect signal. Of course the finger is there to adjust the wheel while detecting. Because the phone or electronic device is in standby mode there is not much signal coming from the device so its hander to detect. You need to adjust the wheel to a higher setting to detect weak signals 5:57
Hello. I got it from elsewhere. I just bought. If I put it next to the wifi transmitter, its battery will run out within 1 hour if its sound is constantly on. What do you think about this? It didn't seem normal to me that it was over so quickly.
Of course the battery will run out fast because its constanly detecting the wifi signal and using up the battery. Its ment to detect and find hidden divices, why do you need to put it next to a wifi transmitter when you already know the transmetter is there?
Lol. A more descriptive explanation other than hand modeling the operation manual could go something like this... You turn the sensitivity down just barely below displaying a light on the meter. When you are closer to the potential spy device and max out the led meter you turn it down more. This allows you to zero in on the potential device. The laser camera viewer is pretty on point but if you hold the button down you can control the flash speed. This comes in handy if there are outside light sources or possibly a motion detecting camera with a shutter possibly. That I would like to learn more on if you've figured that out.
At least u got the meaning from my texts. 😂 Thanks for the comments
@@nice2tradez56 I did. I've had this same device for a while now and because of the not so instructive instruction manual I've been learning from youtube mostly. I saw probably 5 videos before I ever learned about the flash speed. Do you know if there is any way to amplify the power on these? I am considering experimenting since they aren't expensive but would rather find out other ways.
😊
Igor Same Devise but in open area the Signal always full is it some frequency distribution?
You can turn the sensitivity down abit. When you get closer to a source only it will beep. Instead of giving false alarm with high sensitivity.
@@nice2tradez56 thanks for your reply but the sensitivity is down also it’s giving me full signal outside in the street it could be mobile network interference with the divce.
I planed to buy this one
Do you think it was going off so much because you were recording audio and visual right next to it?
Yes could be also because any EMF can set it off. The sensitivity can be adjusted at a lower level. But for the video demo i need to set it at a decent level to show it.
Right it just happened to me. Even in my yard
Okay mine just keeps going off...no matter what level of frequency or if the antenna is extended. Is it broken?
It means that you got allot of electronics running in the room or area. Try to turn of TV, Radio, PC, Phone, Wireless CCTV, or any devices that gives off Electro Magnetic Frequncy and try again.
Please subscribe to my channel so you wont miss new uploads. Thanks allot 😊
I like that I bought, with the stuff and things being found B4 hotels and even motels 😮yes there is evil everywhere . I like this lil gadget
Hi... Thanks allot for the comment. Glad that the video helps.
Please subscribe to my channel so you wont miss new uploads. Thanks allot 😊
I'm just testing the battery of my new cc308. I'm trying to figure out if it's the same as other cc308s. So if yours is near wifi, will it be over in 1 hour?
You can charge it for 4-6 hours first to get full charge before trying.
Normally people dont leave it on a wifi that long.
People just use it for 5-10 minits only, to check for spy devices in a hotel room
mine sometimes works sometimes doesn't , battery still got charge. Last time it was able to detect but right now it can't , i tested it with mobile phone both on standby and in use
I think it's time to change a new one.
Is it possible to detect a radio signal at a specific known frequency?
This detector can't set any specific frequency. It can only set the sensitivity only.
@@nice2tradez56 Thank you for your reply. I am trying to find my temperature/humidity sensor which broadcasts at a frequency of 917 MHz. Someone has moved it from the (outside) location where I placed it. It is still broadcasting its signal so it must be somewhere in the area, but I have been unable to find it. I bought the detector in the hope of being able to detect its location, but there are too many other radio signals of various frequencies in the area.
Wow thats allot of area to cover. The only way is to follow any leads you got and try your luck.
Just bought it and try out. Totally useless and in the arrangement send it back for a refund. Look closely the way this guy tried to adjust the device doesn't make any sense at all. Look how difficult was the adjustment and don't confuse by the demo look closely again many times the device simply doesn't react to the phone signal. Pay a little bit more and get a more reliable one.
All the detector works the same, its just a EMF signal receiver, like a FM radio, you need to adjust the dail to tune into the correct sensitivity to get the optimum results. low cost or more reliable one works the same. You need some getting use to the adjustment of the detector and position the detector to a suitable distance to pick up the EMF frequency.
When the phone is on standby mode it won't give out any signal or very weak signal, so it makes it harder for you to pickup the signal.
if the phone is ringing, downloading, sending and active usage you can pickup the signal easily. In the video i demo on a standby phone that is why its harder adjust the dail to detect the weak signals.
The radio frequency detector works fine.... Justput it on low frequency and if there's any change in the radio transmissions of the device you are trying to detect, detector will pick up by fluctuations in the sound. Tried it with my phone... When i forwarded or paused etc. A youtube video the detector picked up changes in the radio frequencies and the sound fluctuated every time there was a change
If there is a camera hidden on the fire detector would it track it?
Yes you can use the EMF radiation detector to find the wireless camera or you can use the red filter to find the camera lens.
Wow
thanks!!!
Glad that you like the video.
Please subscribe to my channel so you wont miss new uploads. Thanks allot 😊
Sir agar camera off rahega to bhi ye find jar sakata hai
phand jutaane se aapaka kya matalab hai?
What if hidden camera place behind the mirror so how to find it with this gadget?
If its a wireless camera it will give out EMF signals. You can use the detector to picup the signals.
If its a wired camera you can use the red filter light to look for the camera lens refection.
Thanks for watching
Please subscribe to my channel so you wont miss new uploads. Thanks allot 😊
Test gold work see you
can anyone help me have cameras and 2 way listening devices in my home am in uk I need to locate and disconnect can a electrician find them or do i need a bug sweeper
You can ask a electrician to find it, It's easier to find it If you have a detector.
Please subscribe to my channel so you wont miss new uploads. Thanks allot 😊
@@nice2tradez56 a de6tctor that does cameras and the listening bug ?what would you recommend
you can use this model to find it. but if the camera or bug is wired is harder to find because less EMF signals coming from the bug.
Ye sahi me kam karta ya nhi ap ko ye kasa lagta hai
krpaya sameeksha par any veediyo sameeksha dekhen ki yah kaam karata hai ya nahin.
agar aap ise khareedane ka jokhim nahin uthaana chaahate hain. aap kisee aise mitr se poochh sakate hain, jisane ise khareedane se pahale aapake lie 1 prayaas kiya ho. yadi aapake mitr ke paas 1 nahin hai, to aap apane mitr se pahale ise khareedane ke lie kah sakate hain taaki aap pareekshan kar saken ki kya aap jokhim nahin lena chaahate hain.
It's not about him... it's the useless product
How has this worked for you? Is it worth the money?
This is a cheap detector from China. It gets the job done at a low cost.
Be nice is he would answer or say something in the video
only detects phone signal and wifi (no one would be using that to spy on you)
It detects all electronic gadget that send out EMF signals like wireless cams, wireless sound / bug device, gps trackers, PCs and MP3 sound recorders.
can i detect thru wall for listening's bugs
yes you can. as long as the bugs is transmitting signals.
if its on standby mode or off, its quite hard to detect it because there is no signal coming from it.
Please subscribe to my channel so you wont miss new uploads. Thanks allot 😊
Good luck detecting anything but a headache. It's BS
I got this pointed directly at my drop cam video camera and it didn’t even show or go off! Waste of money.
The detector is use for detecting wireless device that gives off radio or wifi signals. If your cam is a wired one you won't be able to detect it because there is not signal coming from it. You can use the red filter and light to find the reflection from the camera lens.
Metal detector?hahaha
Not metal detector. It's a RF signal and lens detector
Please raply sir
already replied
It does not worth the price and even the time you waste the time reading it's manual. Just cheating on people..
It does the job and works fine for the price. Either you don't really know how to use it yet or the price you bought is relatively high. This model is quite cheap detector.
If this model doesn't match your requirements you can look up K18 model.
😂😂😂useless
Need some practice to learn how to use it effectively
ITS SCAM DONT BUY
Please give prove that is a scam.
@@nice2tradez56 i litteraly buy this shit 0.73 € on ali express
@@nice2tradez56 look at 5:20 her finger turn a wheel and there is a red light, theres no detection she just turn a wheel. Now look at her finger at 5:45 there is no detection because she dosent turn the weel. U can just make song and red light by turning the wheel, this is fkng scam
Already written there in the text you need to adjust to a optimum sensitivity to detect signal. Of course the finger is there to adjust the wheel while detecting. Because the phone or electronic device is in standby mode there is not much signal coming from the device so its hander to detect. You need to adjust the wheel to a higher setting to detect weak signals 5:57
It’s crap
Its a EMF receiver. You need some time to get use to adjusting the sensitivity of the receiver and the distance of the hidden devices.
Can you explain me how this works because when i approach a phone nothing happens.
@@snape2611 return it! It’s just a kids toy
Its like you're a magician doing an unimpressive magic trick. Its excrement mate in my opinion. I can face facts...its crap
Sorry that the video is not up to your high standards. If you can do a better video, please upload and share it with everyone.