How to stop squeaky cycle brakes! Bicycle brake restoration and maintenance
Vložit
- čas přidán 31. 05. 2024
- It's a wonderful day for bicycle brakes!
A courier's bicycle was delivered to our bicycle workshop. As you understand, the bicycle courier rides every day and in any weather, even in rain and snow.)
But when you ride in wet weather, your bike begins to wear out faster and squeak a lot.
The first thing that wears out on your bike is the brakes.
The bicycle begins to squeak a lot and brakes very weakly.
A bicycle must be taken care of, especially the brakes. Don't forget, the brakes on your bike are for your safety!
In this helpful video tutorial, I'll show you how to stop squeaky cycle brakes.
I'll teach you how to properly wash your bike, change brake pads, and adjust your brakes.
Enjoy watching my dear cycling viewers!
00:00 How to fix squeaky brakes on your bicycle.
00:18 Bicycle brakes stopped working.
00:44 How to remove pads from bicycle disc brakes.
01:34 What worn bicycle brake pads look like.
02:18 How to properly wash bicycle brakes.
03:16 High-quality bicycle brake caliper washing.
04:25 How to degrease bicycle brake discs.
05:07 Installation of bicycle disc brake pads.
09:26 How to remove air from a bicycle brake system.
Thank you for your comment! ❤️❤️❤️
Share this video with your friends,
it will help the development of the channel! 📈😘 - Věda a technologie
❤ If you liked this video,
🙏 share this video with your friends
📈 it will help the development of the channel!
❓ ask your questions
Very informative. I didn't know about the blowtorch technique for removing the oil film on the brake disc. Thank you for this excellent video.
thank you for your comment!
Share my videos with your friends, it will help the development of the channel! 😘
Ludzie nie dbają o swoje rowery... Good work. 👍
glad to be of service! thanks for your feedback 😘
Excellente vidéo. Je voudrais savoir pourquoi vous réchauffer le disque de frein ?
Je vous remercie pour votre commentaire. Brûlez le disque pour éliminer la graisse et la saleté dans les trous du disque.
@@NiceBikeService I was thinking of using a automobile brak cleaner spray. What is your opinion on it ?
Super film. Dokładnie pokazuje co i jak.
THX 😄👍
dziękuję za komentarz!
Podziel się moimi filmami ze znajomymi, to pomoże w rozwoju kanału! 😘
@@NiceBikeService Robię to 😁
Does this work for Jegwire V-Brake pads😁
For such a bicycle, you need to install ceramic brake pads
thanks for the advice ! 😘
El golpe con martillo en el tapon de la maneta para que es ? Gracias
Hola, normalmente. Es porque cuando los tornillos que se se encuentran expuestos a las inclemencias del tiempo y otros factores, como puede ser humedad, sol, sudor... etc. Se suelen quedar "pegados" por el óxido o por el polvo. De esta forma con unos ligeros golpes "rompes" ese óxido. Y haces que salga mas facil y así no dañas la cabeza del tornillo que puede llegar a barrerse
@@salviclash9335 gracias
What’s in the first spray bottle if you don’t mind?
Must be degreaser
If it's cold and wet there is nothing you can do. The cleanest setup is still going to squeal.
You're right, hydraulic brakes don't like bad weather. For cold and rain, it is better to use mechanical brakes, as they are cheaper to maintain.
Un mes más de uso y frenaba con los pistones 😂
Why knocking the bleed screw with a hammer?
Tap the screw a little with hammers to make it easier to unscrew
el freno 🎻🎻🎻🎻🎻 😂😂😂😂
I would be ashamed to take such a dirty bike to a mechanic
If the customer is paying for bike maintenance, why not)
1)Hello, why hit the handle with a hammer?
2)Why didn't they remove the rotary? on the other hand, it’s bad to wash from the side of the knitting needles
3) it was necessary to disassemble the caliper, rubber pistons
@@NiceBikeService
Цікаво що з ним сталося, що він в такому стані 😁😁
доставка їжі)))
The special tool to push back the piston of the brake caliper is it the same tool to remove the tyres when changing the tube ?
Вау💪
😸😸😸
h
😉
Jamais vu des freins aussi crado…
il y a une première fois pour tout).
first clean that piston, than push it back...now you pressed all that dirt in with the piston...nice