How to wash and lube rear bicycle derailleur. Bicycle maintenance.
Vložit
- čas přidán 27. 05. 2024
- This video tutorial is about how to maintain your bicycle.
It often happens that the rear derailleur on your road bike has difficulty changing gears.
This is all due to the fact that the bicycle derailleur requires maintenance.
I'm teaching you how to properly remove a bicycle derailleur, wash it and lubricate it.
The bike derailleur service will be of the highest quality and will consist of several stages.
This video tutorial will be useful for all cyclists, both road and mountain bike enthusiasts!
Enjoy watching my cyclist friends!
00:00 Bicycle derailleur requires maintenance.
00:38 How to remove bicycle derailleur.
01:20 Remove the rear derailleur.
01:52 Dismantling the rear derailleur into small parts.
04:18 How to clean bicycle derailleur.
07:13 How to wash bicycle derailleur.
07:54 How to dry a bicycle derailleur.
08:33 How to assemble a bicycle derailleur.
11:30 How to lube a bicycle rear derailleur.
12:11 How to install a derailleur on a bicycle.
Thank you for your comment! 😍
if you liked this video,
share this video with your friends ❤️
it will help the development of the channel! 📈 - Věda a technologie
Thank you for your comment! 😍
if you liked this video,
share this video with your friends ❤
it will help the development of the channel! 📈
Without an ultrasonic cleaner, how would you do the cleaning? What cleaning liquid do you recommend?
Great video as always ! Could you please make one about SPD pedals ? Disassembling axles and balls, greasing, adjusting gap ? I'm not aware of any videos on maintaining SPD pedals' external parts (springs, bridges).
Gotta give credit where it's due. This channel is a gem and you're doing quality work. Chapters, timestamps, camera work, no annoying music, raw sound, full process... Just chef's kiss.
A little feedback. It would be nice to know additional info about cleaning products: Is it degreaser? What type? Vinegar? Water? Isopropyl alcohol? What grease type? People don't know that certain grease can ruin your bike. How to deal with hard stuck dirt if you don't have an ultrasonic cleaner. What to do if you don't have X tool, etc, etc.
I know how to do most of service stuff and have the essential tools, but there's always begginners that start from scratch. There's thousands of "top 10 tips" about this but very few people do quality work as you do. Just giving you some ideas for future content.
Keep doing what you do! Thank you.
Thank you for your feedback and advice. Indeed, people often ask about fluids and lubricants. We try to answer in comments, some explanations are in subtitles. In the old videos, washing and cleaning is done without an ultra-sonic washer, with hands and brushes😃
Thanks for the informative video. In the past, I wouldn't take apart the derailleur to clean. Unfortunately, I learned the hard way, that my derailleur jockey gears would wear down, or stick. The cleaning and lubricating of them helped them last longer and the bike pedal easier. Thanks
Thank you for your comment! ❤️❤️❤️
Share this video with your friends,
it will help the development of the channel! 📈😘
Дивлюся ваші відео - дуже подобається, як охайно робите. Але цього разу трохи не згоден з побаченим. Вимито/відчищено звісно бездоганно, але при цьому скоріше за все було і вимито консистентне мастило з пружини, яка лапку натягує. Я б ще додав маленьку крапельку консистентного мастила на вальниці роликів - коли свої велосипеди обслуговую, то так і роблю.
я з Вами згодень, щодо пружини лапки, бажано роскручувати.
але на практиці, ми помітили, що нічого страшного з цим коїться. Вийнято - це пепемикачі зі Shadow+.
а щодо ролликів, так одні кажуть, що треба мастити, інші кажуть навпаки)
типу мастило натягне більше піска і воно там буде шкрябати.
с заводу мастила немає, дорочі)
знову ж таки, при експлуатаціі не помічено різниці)
@@NiceBikeService тоді по роликам це справа смаку. Я наношу неймовірно мало - малесеньку маслянисту плівку. І за рахунок цього бруд якщо і натягується, то не значний мінімум.
Cudownie się to ogląda. Dziękuję
Dziękujemy za komentarz! ❤️❤️❤️
Udostępnij ten film swoim znajomym,
pomoże to w rozwoju kanału! 📈😘
I love watching your videos, and it's so satisfying to see the difference in the end, how it was and how it looked after cleaning and maintaining the gearbox, keep making videos like this👏🏼🧰❤
thank you for your comment!
it's very nice to see girls among my subscribers!!!)
❤❤❤
Id like to point out for anyone new to this and emulating...make sure the guide pulley is in the right place..the guide pulley and tension pulley are different...also use threadlocker medium strength
My Shimano M770 XT shadow derailer had sealed pulley wheel bearings. I bought this derailer in 2009, and i finally had to replace them two summers ago.
interesting story
@@NiceBikeService Um...ok😁👍
After dropping the derailleur body into the ultrasonic cleaner, it should be your duty to clean and apply new grease to the derailleur tension spring and the derailleur carriage spring.
thanks for the advice ! 😘
why no grease on the pulley wheels?? thats gonna be creaky after a sort ride.
There's no lubrication in this unit from the factory. Why not?
Salutation... Je viens de faire un peu de nettoyage de ma transmission mono 12 vitessse XT sur mon vtt , et en remontant les galets du derailleur arrière je me suis aperçu qu'il ne tourne pas dans le bon sens lorsqu'ils sont montés "écriture face extérieurs" du dérailleur. Le galet g est bien en haut et le p en bas.. on m'avait dit ecriture côté extérieur mais là je suis dans le flou... si vous avez des explications.. merci d'avance...
Bonjour. Je ne sais pas quel modèle de dérailleur arrière vous avez, mais si vous regardez le modèle RD-M8100, vous ne verrez pas d'inscriptions sur la face avant des galets. Vous trouverez une description détaillée de vos pièces sur Bike.shimano .com
¿No thread lock? It's always a must.
What kind of ethanol does Da Shen use to clean oil stains?
Thanks.
Thank you for your comment! ❤️❤️❤️
Share this video with your friends,
it will help the development of the channel! 📈😘
На 6:00 я подумав: "О! Так ось як робиться пепсі-кола"
😸
Należało by jeszcze wyczyścić sprężynę napinającą wózek. Na pewno dostał się tam płyn. Co po czasie doprowadzi do zardzewienia sprężyny. Poza tym OK.
Which oil do you use?
Що за рідина для замочування і чим змастили наприкінці?
концентрат для двигунів, а кінці мастило шимано
Fajnie, że pokazujesz jak to się robi w PROFESJONALNYM serwisie. Szkoda, że nie pomyślałeś, iż normalny posiadacz roweru nie kupi myjki ultradźwiękowej za kilka tysięcy, żeby umyć element za 100-200 zł...
Mam też zastrzeżenia do tego, że nie piszesz co wlewasz i w jakich proporcjach. To czerwone to oranżada a potem wódki dolałeś?
Profesjonalny serwis, gdzie same narzędzia i sprzęt to kilkaset tysięcy złotych to może tak wygląda. W przydomowym garażu użytkownik umyje to myjką ciśnieniową lub parową i tyle.
Om spedah saya kalo di oper gigi ko peralihan giginya telat ya itu kenapa ya..?
Świetnie to wygląda - części po myciu wyglądają niemal jak nowe.
PS. Jak długo już jesteś w branży serwisu rowerowego? Pozdrawiam! 👍🙂
Dzięki za komentarz! )))
9 lat
@@NiceBikeService : 👍👍👍
I need a botle of oil with that small needle like yours. You know where can i find something like that?
You can find a bottle with a long spout, like a hair color, sealant, or motor oil. Cut off the spout slightly and put on a needle from a pharmacy injector.
What detergent do you use here ?
for automobile engines
Eline saglik muhtesem yanliz yeni taksaydin pahali degil o kadar 😊
Bu doğru)))))
Teşekkürler!
Unfortunately the grease on the internal springs will be eliminated. Short term probably doesnt matter but long term it probably will matter.
11:34 Jak się nazywa ta za oliwka?
che prodotto hai usato per sgrassare?
isopropile, benzina
No se ve que le agregue ninguna lubricacion
Se puede engrasar, pero no es necesario
勉強になりました👍
コメントありがとうございます！❤️❤️❤️
このビデオをお友達とシェアしてください、
それがチャンネルの発展に役立ちます！📈😘
rimontare quelle pulegge e tutte quelle viti senza un filo di grasso non mi pare una buona idea
I think cheaper and faster is get the new one. All depends what kind of bike you have. Expensive parts are worth to keep clean and nice.
I agree!
but the replacement part is not always available
@@NiceBikeService yes, I had that problem with shimano 4600. At the end I got shimano 105 group set.
I understand that the video just for asmr and content, but a new rear derailleur (claris especially) costs around $20. not worth to spend so much time on cleaning
We tried so hard for the video. We don't bother with regular maintenance as much. But such switches are more expensive for us because of customs clearance
I'm a sergeant in Ukrainian defence forces. Bike maintenance is therapy for me, switch to peaceful life, a bit. It costs more than 20$.
Unnecessary cosmetics. I ride bicycles everyday last 34 years. I never disassembled and cleaned my derailleurs except of the pulleys instantly without remove them. one minute job yearly. I have right now 5 different bikes. The oldest one from 2008. All the derailleurs working great without any necessity to replace to new one. All those years I replaced just recently 2 pulleys for one of the derailleurs. All the derailleurs are 9 speed Shimano Deore - old style: RD-M591 and RD-M510. The weakness of most derailleurs is the spring. And for that- you have nothing to do. Just to pray. And please never oil the spring. NEVER! Not even necessary to clean it. Just leave it as it is.
Of course there is one exception: In muddy situation. But not necessary to disassemble anything. And again don't spray the spring by WD40 or something similar.
NB my comment is only about the derailleurs. Of course you have to change the cables every 2-3-4 years. Depends how often you ride.
Every part of the bike requires maintenance.
thank you for your comment! 😘
✊✊✊
Interesting commentary about the derailleur spring. Does this also apply to the external springs of the SPD pedals ?
About SPD pedals: I use 22 years same model for all my bikes: Shimano PD-M324 pedals. It's dual use pedals: One side SPD, Other side flat pedal. This pedal model is maybe the most durable pedals Shimano ever manufactured. I use them on road and off road. I clean them just with Dry and hard brush, And yes I oil only the upper parts that contact the cleats without oiling the sparing. So far all the pedals working fluently. Some of them I installed first time 22 years ago.... I have another 2 new sets I bought about 10 years ago, But I still didn't use them.
Fajna ta myjka.