3D Puff Embroidery Digitizing
Vložit
- čas přidán 8. 03. 2017
- 3D Puff Embroidery Digitizing by Extreme Wizards Digitizing.
To place a digitizing order or get a digitizing quote click on
www.extremewizards.com/digiti...
Visit www.extremewizards.com/
This is a tutorial video on how to digitize and embroider 3D puff embroidery.We will be using Melco Design Shop digitizing software.We will embroider our 3D puff embroidery using Melco EMT 16 embroidery Machine.
What we will be covering in this tutorial
1)Preparing your machine for 3D foam
2)What type of foam to use.
3)Stitch settings when digitizing with Melco Design Shop digitizing software Version 10.
4)How to cap your columns and other techniques
5)Get a copy of the Embroidery file and related artwork. www.extremewizards.com/wp-con...
If you found this tutorial helpful, we would greatly appreciate it if you could give our youtube video a thumbs up. - Jak na to + styl
I think this is one of the best videos showing (3d puff) digitizing. Very very clear and neat. Thanks!
Thank You very much.:0)
Really awesome lesson! Everything clear, short and understandable. And music is pleasant bonus 🌹
Thank you so much. I've been looking for this information. I have a XTS and I love it!
Very thorough, thank you.
This video is very helpful for me . machine and designing combination is best in this video.
Tq and thankyou for this video
That was really interesting and informative. Thank you!
Great Video.. Thanks
Thank you for presentation. Verry interesting.
Brilliant Thank you
EXcellent video. Thank you
I've been looking for this information.Thank you so much.
You are so welcome!
Excellent video. I like the way you explain why you do what you do.
Carol Undy Thank you for the feed back. Much appreciated. I’ve been derelict in my making of new videos due to our work load but I will be putting one out soon on small lettering.The feed back helps in making future videos.
Cheers
Jerdy.
@@extremewizardsdigitizing3101 That is great news.
Thank you. This helped me with my problem!!😄
Glad I could help:-)
Excellent video. I like the way you explain.
Thank you very much!
Excellent choice in music!
can you do a video on small puff digitizing, and when will you do more videos.?
wou amazing.. good job sir.
Thank you! Cheers!
Nicely done Jerdy. I don't use Melco software, but the techniques for successful 3D should lend themselves well to my software. Thanks for a great session ! One question: When setting up the column satin stitch width, is it the goal to only have needle lands on each side of the digitized column or can there be needle landings within the foam? I ask because at a certain column width, the machine will start doing a combination type stitch where there is an additional needle landing in the middle of the column due to it's width. How do you get around this or can you. Any advice on this? Thanks in advance....appreciate any pointers.
The landing in the middle of the needle on long stitch length are settings on your machine.Each machine model has a different maximum stitch length before it does a empty jump stitch or actually lands a stitch at that particular maximum length.
Cheers
Thanks
what foam is appropiate for this puffed embroiderying?
maybe I missed it but are we supposed to add an end stitch or do we leave the area empty aside from the cap stitches?
Is it possible to do cursive font in puff and have it look Nice
how do i get the stencils for caping stitch, bridge, and edge??? i love how you made it so simple with those stencils. Im assuming you can just drag and increase or decrease size according to design style or size
The stencils I created using Corel and saved it as a JPG for the purpose of the video.When I digitize 3D I eye ball it now as I can guestimate the width of the cap and so on.
Cheers
Jerdy
that you for this, i wanna know write the text form the machine?
Good video
Thank you. Hope it was helpful. Cheers
I use Wilcom E3 just starting out is there a lot of difference to the softwear you use, just tried it and my stitch length is not going to outer edge in middle so i have two stitches instead of one
You probably have the AutoSplit feature turned on in your satin stitch settings.
WHERE DO YOU BUY THE 6MM FOAM ?
olá tem como abilitar a tradução no su vídeo por favor?
Awesome work! How did you get into this kind of work? I'm interested in doing this too.
I kind of fell into it :0). I started as a machine Technician for Melco Embroidery Machines.I later became a trainer for our digitizing software and it took off from there.Thanks for viewing and taking the time to comment.
Cheers
Jerdy
Do you digitized for public ?
Yes we do.Just email us at info@extremewizards.com
Cheers
Jerdy
How thick was the foam used? I wanna use the same for mine. Thanks.
3mm foam. Make sure it is high density foam. The finished product will look much nicer versus regular density foam. Also make sure to raise your presser foot to the height of the foam so it doesn’t crush it. Melco machines have an adjustable presser foot but I know not all machines do. Also make sure you loosen up your tensions. If you have a Melco machine there is a 3D preset in the software you can select.Give me a call at the office if you need any help. Cheers.
Jerdy.
hola! desde ARGENTINA podrías enviar o subir alguN link que contenga algún diseño con letras en 3D PARA PROBAR EN MI BORDADORA HOGAREÑA??? MUCHAS GRACIAS POR TU AYUDA!!!!
czcams.com/video/uOZaTUfWqRI/video.html
Hello!
I have a problem, when embroidering 3D designs, foam is constantly visible, I decided to try to embroider your design and embroidery also turned out with sticking foam. I did everything according to your settings, raised the shoulder blade, high density foam.
What could be the problem?
There are a number of possibility's, but the most common are the following. You need to stay away from regular foam and go with high density foam, that is crucial .Next, make sure you have your tension as loose as possible without it looping. Call me at the office if you like and we can discuss it.
Cheers
I’m having a issue ? Where it doesn’t says satin on top of top stitching it does give me the option to make it satin but just all elements so it doesn’t to allow me to change the density mm .. mine is just giving me option to change density percentage .
Ernest Vasquez what software are you using?
How to adjust the presser foot? Thanks.
It depends on the machine you have.If its a Melco Machine, Amaya or EMT16 series then you have the metal gear to the left of the head that will toggle the presser foot up and down.As for the other types of machines I don't know.We only sell and service Melco Machines here in our Shop.If you have any other questions please feel free to call us at the office.
Cheers
Jerdy
Hi! I would love to take you digitizing classes. Do you offer any classes currently? thank you!
Sorry, no. We are mainly a digitizing company and unfortunately we just don't have the necessary time to give courses.
I need a file digitized to meet the requirements for a 3D Puff embroidery for my online store
You can send your request to our web site.
Can I use this software with a Ricoma embroidery machine..?
Yes just save the file that your machine reads.
on your caps density, it says .25mm. is that 2.5mm? Also on your columns density says .18mm
its .25 mm and .18mm respectivly and not 2.5mm or 1.8mm.
Cheers
Jerdy
Hola me gustaría estos viveos en español
Can these sane actions be performed on SewArt?
What do you mean by SewArt?
80/12 needle