Guitar

Sdílet
Vložit
  • čas přidán 21. 08. 2023
  • In this episode of DIY Guitar Making: A full guitar build from start to finish! I give detailed commentary including guitar building techniques and analysis of the finished instrument.
    Guitar #106 is an Orchestra Model with a 25.34" Scale, Sitka Spruce soundboard, and Nicaraguan Rosewood back and sides, with Macassar Ebony for the fretboard, bridge and appointments.
    For the full playlist of Guitar #106: • Guitar #106 | Day 1 | ...
    🔴 All episodes available at diyguitarmaking.com
    🔴 Register for an 9 day Hands-On Guitar Building Workshop in Bernville, Pennsylvania: www.ericschaeferguitars.com/l...
    🔴 Check out the online course "Building an OM Acoustic":
    www.ericschaeferguitars.com/c...
    🔴 To commission an instrument from Eric: www.ericschaeferguitars.com/i...
    🔴 Check out the Radial Rosette Maker Jig: www.ericschaeferguitars.com/t...
  • Jak na to + styl

Komentáře • 27

  • @MDmathews
    @MDmathews Před 18 dny

    This is my first time on your channel. You do very good work. Beautiful. The sound to me is just as, if not more important than the beauty. You seem to nail both!!

  • @Elisplayhous1231
    @Elisplayhous1231 Před 9 měsíci +2

    Youre the only one making consistant content. Thank you!

  • @vince8081
    @vince8081 Před 4 měsíci +1

    Fantastic job, love the headstock, straight strings, like all guitars should be...

  • @911hillclimber
    @911hillclimber Před 5 měsíci

    Fabulous design and execution. Joy to see!

  • @MrHeliosoul
    @MrHeliosoul Před 9 měsíci

    Sounds amazing!

  • @juliantaylor7663
    @juliantaylor7663 Před 2 měsíci +1

    Great video as always
    With your finishing technique
    It’s almost like you’re French polishing with tru oil

    • @EricSchaeferGuitars
      @EricSchaeferGuitars  Před 2 měsíci

      I addressed your comment in a new Q and A episode: czcams.com/video/_APy7b-UncU/video.html

  • @Today_I_Want_To
    @Today_I_Want_To Před 8 měsíci

    Kudos! One chord played and... i'll buy it!

  • @CMRWoodworks
    @CMRWoodworks Před 8 měsíci +1

    This is good stuff!

  • @lcguitars2393
    @lcguitars2393 Před 9 měsíci

    Beautiful work Eric! Sounds like lots of projection for just a camera mic! He is going to love it!

  • @walterrider9600
    @walterrider9600 Před 9 měsíci

    thank you Eric. yes i have been watching for a long time . question do you shellac the inside of the guitar ? i understand from wood workers to all ways coat all surfaces of the wood so the wood will expand evenly . from what i am thinking it would keep the cracks down too. love that rosewood or at least that color of it . generally i am not a rose wood fan . why not put the fret wire in fingerboard before mounting it to the neck ?

  • @MrFudgepump
    @MrFudgepump Před 7 měsíci +1

    I love content like this. You might not have a gazillion views but oh-my-days informative how-to guides on awesome stuff is why the internet was invented (...also porn).

  • @litoboy5
    @litoboy5 Před 4 měsíci

    Master

  • @Red-wave2024
    @Red-wave2024 Před 5 měsíci

    Why is the saddle so long?

    • @EricSchaeferGuitars
      @EricSchaeferGuitars  Před 5 měsíci

      I addressed your comment in a new Q and A episode: czcams.com/video/eraFsUhpxR8/video.html

  • @valdineicorrea505
    @valdineicorrea505 Před měsícem

    mande um violão para mim meu brother!! valdinei correa aqui do Brasil

    • @EricSchaeferGuitars
      @EricSchaeferGuitars  Před měsícem

      I would be more than happy to.
      www.ericschaeferguitars.com/instruments-ordering/

  • @deadforalldead3576
    @deadforalldead3576 Před 19 dny

    I’m about to build my own guitar next week, i was told that building cutaway will be difficult for a beginner so he recommended me not to do it.

    • @EricSchaeferGuitars
      @EricSchaeferGuitars  Před 2 dny +1

      I addressed your comment in a new Q and A episode: czcams.com/video/tooziyCpQMY/video.html

  • @waynejones6215
    @waynejones6215 Před 4 měsíci

    Why is your saddle longer on one side than the other😢

    • @MDmathews
      @MDmathews Před 18 dny

      I was going to ask the same guestion.

  • @user-ko8ue8dy5c
    @user-ko8ue8dy5c Před 4 měsíci +1

    Why don't guitar makers reinforce the area under the bridge? Under the tension of the strings, the top will begin to deform and there will be a hump due to which the height of the strings will increase. It's unpleasant to buy an expensive guitar that will definitely have this hump. Similar to the Gibson theme where the headstock breaks off and it has become the norm

    • @badhabit8824
      @badhabit8824 Před 2 měsíci +3

      The entire idea around the top of a guitar is to have only enough bracing/material to keep dit from collapsing. A slight hump is expected and doesn't affect time negatively. If it rises too much then it can be addressed by a luthier but a well built and maintained guitar should be fine. You'd rather have a great sounding instrument that may need maintenance decades down the road than an overbuilt top that is muted and dull but will never warp. ✌️

    • @user-ko8ue8dy5c
      @user-ko8ue8dy5c Před 2 měsíci

      JKM Guitars. This is not an advertisement, but an example of a different approach. So a person does it according to his own scheme and it seems that this place will be stronger.@@badhabit8824

  • @thefreese1
    @thefreese1 Před 4 měsíci

    Interesting... my only criticism is personal taste ..that I don't care for the headstock shape .... kinda looks like a crocodile head to me .... but that's has nothing to do with your work ..
    I love it when I see people use hand tools as much as possible... makes you think about how the old luthiers from countries ago did it

  • @jacquesgravelle6822
    @jacquesgravelle6822 Před 2 měsíci

    YOU FORGOT TO PLAY IT !!!! That's why were here ??????????????????????????????