Video není dostupné.
Omlouváme se.
Carbon Fiber Pipe Made From Prepreg - Part 2
Vložit
- čas přidán 29. 01. 2021
- Hey everyone!
I made a water pipe out of carbon fiber prepreg for GL1100. I'm really happy with how it came out. Let me know what you think!
Watch Part 1 how I made the mould here - • Carbon Fiber Pipe Moul...
Please subscribe and thanks for watching.
Wow ! Neat work,good music
I for the first time see the need for a two part mold to make a cylinder.
Thank you .
Hey
Thanks so much! More good content is coming soon. 🛠🤘
sosem gondoltam vna, h igy keszul a carbon cso!😂😂 na jo, en is karbon buzi vagyok, igy mar lattam jo par videot. A panigale munkad is zsenialis, vagy egy kawam nekem is. Jo lenne par idom... mindig azt tervezem, h a telen neki allok - meg a sorfozesnek- aztan mire eszreveszem magam, mar tavasz van!
That's pretty dope, a lot of work but all worth it in the end. I'm subscribe....got 2 gl1100 and you just opened the pandora box for me. Thank you!
Thanks so much!👊🏻 I’m planning to do a few crazy works with the “oldwing” . Stay tuned!🛠🏍🤟
Sweet!
Thanks man!
👍🏾 You've got me wanting to make some carbon fiber parts for my bike. 😂
Thanks man!
Definitely give a try!
I liked your videos. They are well made 🛠🏍🤟
Very nice !
Thanks so much! 🛠🤘
what are the tubes for?
ZR - I know that rain sound. You're in Seattle!
thanks mister, im lazy, l use bladder molds from piercan international, vista california.
Hey! Great video. thx 🙏
Hey!
Thanks so much!
Very nice bud 🛠🛠👌🏻👌🏻
Thank you very much!
Super ton travail
I don’t understand it. Does the fiber not go all around the pipe? Then the strenght of that pipe will be the strenght of the epoxy only.
Hey
The cf is all the way around and the resin holding the layers together. It is heat resistant up to 130c.
Thanks for watching 🛠🤘
Are the copper(?) strips used as a gasket for resin seepage? Thanks..
Hey! Yes. I tried to seal the side gaps.
Thanks
Is it work when using wet lay method?
Hey
Yes it can work. But with the wet layup method will be a lot more difficult to make a tube shape. Maybe check this video to give you an idea about the whole process. czcams.com/video/YNWu1-r5HGo/video.html
🛠️🤘
Have you ever thought of making carbon fiber handlebars?
are you not worried about a resin matrix breakdown because of the coolant ?
Hey
Will see. Never tried it before. Can be possible it will wreck the whole engine or just the pipes. I would like to see the results 🛠🤘
@@zrcarbon9937 true i looked into it and its unlikely to be a problem acidity is bad but coolant is normally alkaline / just getting acidic if its way bad so i think you will be fine.
Why not bake the carbon in the oven?
Hey
Yes, I did
The prepreg is rated for hot water temperatures I assume?
Yes 130c
Hấp bao nhiêu phút nhiệt độ bao nhiêu thế ad ? 👍
100C for 4h than 120C for 1h
@@zrcarbon9937 🥰🥰🥰 tk
Material of moulds?
Hey
Will be a video out in a couple of weeks with the same materials I used in this video. I'll post everything up in the description, but I sourced most of the stuff from www.easycomposites.co.uk
Thanks for watching 🛠🤟
Are you using any kind of mould release agent ?
Yes, I used chemical release agent. You’ll see at 1:10 in the video.
Thanks for watching!
Nice, what prepreg do you use?
Thanks! I used 210g 2x2 twill 3k
@@zrcarbon9937 What brand?
We'll build!
Hey!
Thanks so much!
@@zrcarbon9937 cutting the part did not look to good to me... Maybe check the curing cycle...? Is it fully cured? Give it some more time to cool down, cooldown delta temp is also important! To sand the ends flush use a block clamped to the bench and put the tube next to it and the sanding block vertical along the bench... Should be a simple streight sand down ;)
Keep it up and keep your self challenging!
(I gave my best but please correct my English if you can)
Thanks so much for your help!
Keep making your videos, they are great! 🤟
@@zrcarbon9937 same to you!
What is cf polish
Hey!
The polish I used (Easygloss carbon fiber polish & protect) is designed for carbon fibre or dark-finish composite parts to give a deeper contrast for your parts.
What the mold make from?
Hey,
I put all the information about how I made the mould here czcams.com/video/nPcdG4ggV2Q/video.html
Thanks for watching 🛠🤟
az letezik, h vki beteges vonzalmat erez a kompozit anyag irant? Neha ezt veszem eszre magamon...😂😂😂
Azzal nincsen semmi baj! Csak ne h eldurvuljon 😅🛠️🤘
@@zrcarbon9937 most megyek lefekszem, reggel koran kelek... mar azt hittem ennyi nap csend utan, hogy titok, hogy magyar vagy! : )))) orulok, h valaszoltal, annak meg plane, hogy ilyen kozel vagy. Carbon, sarga-fekete es kawa buzi vagyok... az jo vagy rossz? : )))))
ocsem, az a kemence az elektromos suto futesevel!!! es ahogy osszeraktad!!!! Azta kurva! eskuszom, ha taliznank, vinnek egy par dewalt kesztyut! : )))))))))
No BGM is dood