300ZX - Enkei TS-5 wheels - Test fit and install
Vložit
- čas přidán 8. 09. 2024
- In this episode in I test fit and install my new Wheels and Tires on the 300ZX.
All parts where acquired from www.penguingar...
Wheel:
Enkei TS-5
18x9.5 +38 offset
Pattern 5x114.3
Center Bore 72.6
Weight 21.2 lb
Tire:
Falken Azenis RT615K+
265/35r18 97W RF
Lug nuts:
Muteki SR48 Open ended
Chrome Black
12X1.25
Hub Centric Rings:
66.1 mm bore to 72.6 mm bore
Wheel Spacer:
StanceMagic - 3mm Hubcentric 5x114.3 (66.1 MM Bore)
Part No.:
521-895-6538
32905B
72-6606
enkei.com/shop...
www.tirerack.c...
Very nice choice of wheels man. The work great with the car and they fit!
Yeah, they fit will with the 90's look of the car.
Good work man I like the way you love your Zed, My Zed I drove it ruff, I swear one day i drove my Zed 20 min with only one lug nut on a rim, And over heat engine had to stop 10 min to cool off like 4 times one take, I missed up with the wrong oil/low oil/put tap water on it My car never stop every thing on it after all I did to it was original factory parts only the alternator seized because off age, Zed are very tuff/ruff cars, I lost mine to an accident in 2021, Thank you for your videos
Your welcome. Glad you are enjoying the vids.
Last week I got the Enkei PF07
18x 9.5 + 25. Hope they look and fit well
depending on the tire you use, you may need a small wheel spacer in the front
I went with 18x9.5 +22 all around with 255/35/18 which keeps the speedo/odometer almost exact.
Yeah, mine is off slightly, but not very much. I use www.willtheyfit.com to check most of the fitment stuff. and to see how far off the speedo might be. FYI, i am look at going with 285/30/R18 next year which will correct the speedo and give the biggest tire i can fit on 9.5" wide wheel.
Very helpful! looking at the same square setup, but I plan on lowering slightly. Good insight to know I can fit this setup on stock height and it doesn't look goofy. Thanks!
No problem, glad you found the vid usefull. fyi, with this set up and 0.75" upfront drop and 0.25" drop in the rear it looks good,. plus it handles will too.
@@z32_workshop52 that’s a little less than I wanted to drop it originally, but function>form for the daily
@@uncertifiedtankmechanic9717 Yeah I went the cheap route for now on lowering, Knoi Yellpw sport shocks with Ebich Pro Lowering springs
Question here, but where did you get that poster with the lady with her back turned? Thank you.
Its not a poster its a painting, and i have had it since i was in college, its was past down to me from my brothers.
Odd question but are the enkei logos on the spokes removable or permanent?
That's a fair question. They are stickers, so removable.
🥰🥰🥰
Thanks for the Love
Did the front tires ever rub under hard cornering? Trying to figure out specs for my z
Nope I haven't had an issue. Although I did add a small 3mm spacer just to be on the safe side. For the front tires only.
I run this same setup square wheel/tire setup on my z using wedsport wheels and falken tires. With my larger greddy intercoolers, i ran into rubbing issues with the fender liner and coolant reservoir on the driver side. I have since removed my intercooler brackets and the rubbing is gone. Prior to removing my intercooler brackets, my factory reservoir could not be bolted down in factory location.
czcams.com/video/05eothf5GB8/video.html
you can see it here.
Did the hub rings fit and what size are they?
66.1 mm bore to 72.6 mm bore
What kind of lug nuts are you using? The ones i have are too short
It's in the description of the video
@@z32_workshop52 this is my first time buying wheels and had no idea about hub centric rings. I have a 2017 honda civic and the steel wheel hub centric center bore is 64.1 and the wheel i purchased are enkei ts5 center bore 72.6. Which hub ring size would I need? Please help
@@EngineMotor 64.1 to 72.6
@@z32_workshop52 got it, thanks. Sorry to bother, Last question, are the lug nuts conical or ball radius?
@@EngineMotor i think the are conical, but i am not 100% sure
Wheels size? Front and rear
It's in the description of the video. It's a square set up
WHEEL MADE IN THAILAND?
Japan or where every their manufacturing facilities are located