I need the reassembly video for this 500 your videos are most definitely the best there is I love the way you do them and explained everything as you go . You are a excellent teacher
Thanks for the comment and for watching Lee. Hit the subscribe button as we have a lot more videos coming out on this machine. If you need parts or tools for the job check us out at www.midnebraskamotorsports.com/
Had to come back to this video after a few years. Timing chain got bound up and stuck, needed a little info for replacing the cam. Got what I needed. Great video ! Much obliged.
Love to see comment like this. Glad it helped. Thanks for watching. Let us know if you need parts or have questions. www.ebay.com/str/midnebraskamotorsports
Tearing into my 2001 now, the timing chain came off, trying to decide if I just replace the chain or do a top end while I got it apart, the liner looks real good so might just re ring it.
Awesome Justin. Thanks for watching. Let us know if you need anything. Hit that subscribe button so we you notified when we have more videos coming out on this model.
Thanks for the comment! Let us know if there is anything we can help with. Check out: czcams.com/video/X0AdFxkJiOg/video.html for more tips. And: www.ebay.com/str/midnebraskamotorsports for all your parts.
Just tore down my 09 rubicon 500 to change the hondamatic unit using this video! Thank you! Any chance you have a relevent assembly video done for same atv?
used this video to pull apart a 2002 Ruby 500 because it didnt seems to have adequate oil pressure to the rocker arms and cam. cleaned all the case sealer off , blew out all the oil galleys, new Honda oil pump installed an all new ORing seals on every place the cases pushed oil thru. cleaned all the pick up screens in the motor. Cheack pressure relief valve, spring and free as a bird. Have 50 psi at Idle when it should be 22 @ 1400 rpm. No Idea why. Didnt split oil housing. and what about the crazy oil filter bolt assembly? could that be an issue. The pump has 3 rotor assemblies so i assume one is specifically for the cam and rockers, one for lower end and one for Honda matic. at my wits end
Clutch Puller: www.ebay.com/itm/333950524774 Flywheel Puller: www.ebay.com/itm/233541676623 Thanks for watching. Let me know if you have any other questions
I just want to say. This is a awesome video. I wish I had a quarter of the knowledge you have on this stuff. But I’m sure you get a thousand questions but I gotta ask you this. I have a 2004 foreman rubicon, it does not move. It starts great and runs great but just won’t move in any gear. Forward or reverse. And the display doesn’t have the - - it shows the normal N, D, 12345, R. And suggestion
Mid Nebraska Motorsports the dash only shows neutral when I start it and I can put it in drive and the dash read “D”, if I swap modes the dash will say 1,2,3,4,5. Depending on which gear I shift it too.
@@thomaswojcik8029 Sorry for the late reply. Not sure how I missed this one. Assume it is an electric shift? Have you tried the manual override? Let me know.
Oh yea! I have several of those out / coming out. They are a real issue and an expensive fix. I do have good used ones available. Check out: www.ebay.com/str/midnebraskamotorsports Hit that subscribe button for me!
I have to pull the front case to replace the timing chain. In the vid it looked like a shaft went all the way through to the back case? So do I need to pull the back case apart before removing the front case? I’m trying to leave the engine in the frame. Thanks for any info
Hello, we found about a teaspoon of brass looking shavings in the engine, what all components have a brass look? We know the clutch Looks like a brass. Problem is it makes a very loud grinding noise. Still will run and drive. Thanks
We may not have one yet. We have 100s of videos ready to get posted. Keep any eye out for it!! Also check us out on midnebraskamotorsports.com. Thanks for watching.
Thank you for this video great job! I have a 2003 Honda Rubicon 500 4x4 it goes great until after it warms up then it just grinds and won’t go into gear any ideas what might be causing this issue? When cold it shift thought all gears in auto and when I use the up and down gear selector. Any help is greatly appreciated
I have a question.. I have the same motor as this and when rebuilding I can’t seem to get the o rings for the water pipe on the water pump to go in right any tips?
BTW Your videos are the best on CZcams by far. Your the only one that can speak clearly and has great lighting so we can see probably how to fix things right the first time. 🤘 Rock on brother!
I think these videos are priceless to anyone with one of these engines! Thanks for posting.
Thanks Mike!! Enjoyed watching your fourtrax rebuild video again this morning.
When you see one of your favorite youtubers commenting on a random video complementing the tuber....instant follow..LOL
I need the reassembly video for this 500 your videos are most definitely the best there is I love the way you do them and explained everything as you go . You are a excellent teacher
Thanks for the comment and for watching Lee. Hit the subscribe button as we have a lot more videos coming out on this machine. If you need parts or tools for the job check us out at www.midnebraskamotorsports.com/
lots of people asking about the rebuild video?
Had to come back to this video after a few years. Timing chain got bound up and stuck, needed a little info for replacing the cam. Got what I needed. Great video ! Much obliged.
Thanks @sellyy!!! Love comments like this! Have you subscribed to our channel yet?
Priceless video,,very practical job
Love to see comment like this. Glad it helped. Thanks for watching. Let us know if you need parts or have questions. www.ebay.com/str/midnebraskamotorsports
Possibly best engine teardown video I've seen. Love my Honda Rubicon and would definitely resort to this video if I ever need to.
Tearing into my 2001 now, the timing chain came off, trying to decide if I just replace the chain or do a top end while I got it apart, the liner looks real good so might just re ring it.
2 years later and no re assembly video... lol thanks a bunch 😂
Tell me you haven't been waiting on me! Did you buy one of these: www.ebay.com/itm/233541676623
no, bought the motion pro off amazo , got it next day
Thanks man haven't had my 4 wheeler out in 2 years I bought it with a messed up transmission. This years the year
Awesome Justin. Thanks for watching. Let us know if you need anything. Hit that subscribe button so we you notified when we have more videos coming out on this model.
When are you going to put a video on assembly I need to know how to put one back together
Great Video
Thanks for the comment! Let us know if there is anything we can help with. Check out: czcams.com/video/X0AdFxkJiOg/video.html for more tips. And: www.ebay.com/str/midnebraskamotorsports for all your parts.
Thank you for doing this video, there's just not much content out there on this motor. When will you be posting the video showing the reassembly?
Keep your eye out. We have hundreds of videos ready to post. Just not enough time in the day!
did the reassembly video post yet? awesome video, got me all way tore down and hondamatic replaced but now i could really use the reassembly video.
Hello. You mentioned in the video that you were going to post a follow up video on the reassembly. Will that still happen? :)
Please to the assembly video I am replacing a lot of parts on mine and it’s hard to find good info
Just tore down my 09 rubicon 500 to change the hondamatic unit using this video! Thank you! Any chance you have a relevent assembly video done for same atv?
Thanks for watching AJ. We have hundreds of video ready to post. Keep an eye out for reassembly!
Does the reverse have any thing to do with the hondamatic.
Hi is the rebuild video out already? If yes can I have a link thank you?
used this video to pull apart a 2002 Ruby 500 because it didnt seems to have adequate oil pressure to the rocker arms and cam.
cleaned all the case sealer off , blew out all the oil galleys, new Honda oil pump installed an all new ORing seals on every place the cases pushed oil thru. cleaned all the pick up screens in the motor. Cheack pressure relief valve, spring and free as a bird. Have 50 psi at Idle when it should be 22 @ 1400 rpm. No Idea why. Didnt split oil housing. and what about the crazy oil filter bolt assembly? could that be an issue. The pump has 3 rotor assemblies so i assume one is specifically for the cam and rockers, one for lower end and one for Honda matic.
at my wits end
I need to replace the oil pump do I have to brake the whole engine down
Unfortunately yes you do!! Just pulled one down yesterday. You'll do great!
You mentioned you’d give us the part number for the puller you used on the clutch?
Clutch Puller: www.ebay.com/itm/333950524774
Flywheel Puller: www.ebay.com/itm/233541676623
Thanks for watching. Let me know if you have any other questions
I just want to say. This is a awesome video. I wish I had a quarter of the knowledge you have on this stuff. But I’m sure you get a thousand questions but I gotta ask you this. I have a 2004 foreman rubicon, it does not move. It starts great and runs great but just won’t move in any gear. Forward or reverse. And the display doesn’t have the - - it shows the normal N, D, 12345, R. And suggestion
Any info would be great. Thanks
Mid Nebraska Motorsports the dash only shows neutral when I start it and I can put it in drive and the dash read “D”, if I swap modes the dash will say 1,2,3,4,5. Depending on which gear I shift it too.
But I did finally take the clutch cover off and found the oil pump chain off. I got a new one but haven’t put it on yet. Maybe that was my problem
@@thomaswojcik8029 Sorry for the late reply. Not sure how I missed this one. Assume it is an electric shift? Have you tried the manual override? Let me know.
Vidoe on hondamatic clutch 2005 rubicon
Oh yea! I have several of those out / coming out. They are a real issue and an expensive fix. I do have good used ones available. Check out: www.ebay.com/str/midnebraskamotorsports Hit that subscribe button for me!
I have to pull the front case to replace the timing chain. In the vid it looked like a shaft went all the way through to the back case? So do I need to pull the back case apart before removing the front case? I’m trying to leave the engine in the frame. Thanks for any info
Going back together does the hondamatic need to be timed or clocked?
no it dont.only goes in one way.
Hey. Is there such a thing as clutch adjustment on a Honda Rubicon?
Hello, we found about a teaspoon of brass looking shavings in the engine, what all components have a brass look?
We know the clutch Looks like a brass.
Problem is it makes a very loud grinding noise. Still will run and drive. Thanks
could not find the one video of putting it back together?
We may not have one yet. We have 100s of videos ready to get posted. Keep any eye out for it!! Also check us out on midnebraskamotorsports.com. Thanks for watching.
Did you post the video of the rebuild
Keep checking back. We have hundreds of videos yet to post. Thanks for the comment and for watching. Let us know if you have an questions!
Thank you for this video great job! I have a 2003 Honda Rubicon 500 4x4 it goes great until after it warms up then it just grinds and won’t go into gear any ideas what might be causing this issue?
When cold it shift thought all gears in auto and when I use the up and down gear selector. Any help is greatly appreciated
I have the same problem did you figure it out ?
Y donde puedo comprar el extractor de embrague?. porque aquí en España es imposible 😎
Do you have to pull the gear set out to replace the timing chain
You don’t have a video showing assembly do you?
I have a question.. I have the same motor as this and when rebuilding I can’t seem to get the o rings for the water pipe on the water pump to go in right any tips?
Hi. How can I put on time my 2004 honda foreman trx rubicon 500 4x4
Can you fix the hondamatic transmission without taking entire engine apart?
Hey. Is there such a thing as clutch adjustment on a Honda Rubikon? I have two of these and one is more straightforward.
How can I get the rebuild video?
Do a rebuilt video
Will you PLEASE do a 2000 recon 250 engine! PLEASE!!!
Thank you so much! I'm very smart when it comes to engines but sometimes I get carried away and forget how things go back together correctly. 😂😂😂😂
BTW Your videos are the best on CZcams by far. Your the only one that can speak clearly and has great lighting so we can see probably how to fix things right the first time. 🤘 Rock on brother!
Do you have to take the back of the motor apart to replace the oil pump?
@@MidNebraskaMotorsports okay thanks, I have a 03 that needs one
2 yrs later I bet this customer is mad! Never rebuilt
Don't forget to pick-up your clutch puller for this Rubicon Corey: www.midnebraskamotorsports.com/product/mnm2-1-1/ Thanks for watching.