Honda TRX Hondamatic - Troubleshooting Good Hondamatic vs. Bad Hondamatic

Sdílet
Vložit
  • čas přidán 7. 09. 2024
  • Hey everyone - Long time since I uploaded a video. I found that there doesnt seem to be any videos out there that actually have the part in hand and gives you a good look at the thing so you can make any determinations that the Hondamatic you have is bad. This is my first time working on one, so I didnt know what I was looking at & things that looked bad, were not really the bad portions of the part. I hope this helps you out, you basically get two looks at the Hondamatic before you have to split the cases, one from the clutch side & one from the alternator side. The motor sounded like hell, but supposedly shifted ok, I have found that pulling the motor is less work than trying to do the work on the floor.....With this video, it should have you to a point where you can make a confident decision on going further with the repair and making the purchase of the part.

Komentáře • 9

  • @Pete68T
    @Pete68T Před 2 lety +1

    Good Work There👍Well i Worked at a Honda Dealer Doing What your Doing For 14 Years ! Probably in that Time Only Around 3 Hondamatics Needed Replacing ,I Did a Pdi OnnA Brand New One And it Broke on Test Ride,But That Engine and Trans Was One of the Most Reliable Honda Made.
    The Way it is So Smooth Shifting and Under Power No One Else Had Anything to Match it And The Idea Came from a Milling Machine Drive
    The Hindamatic Is Very Expensive to Make And Thats its Downside.
    That Unit is A big Lump and to Have That in the Engine and IOnly Running on the 5litres of Engine Oil Says Something About How Clever Honda Are.
    10 Speed Smooth under Power Shift and Full Engine Braking !!! Thats Some Trans in an Atv One of my Favourites,Better than Belt Drive CVT Rubbish on Can Ams That i Also Worked on.

  • @levi-316
    @levi-316 Před rokem

    This was super helpful. Im about to dig into mine.

  • @micflynn1
    @micflynn1 Před 2 lety

    The Hondamatic pump (motor) can be rebuilt but you have to replace the bearing in the swash plate with a metal one not the plastic bearing.
    Also replace the oil pump with a updated oil pump or your asking for problems. The relief valve on the oil pump for the 01-04 are known to go bad.

  • @riderr2035
    @riderr2035 Před 2 lety

    I have had a 2004 honda matic 500cc im glad i sold it it pops pops pops on reverse and only goes on second gear im glad i sold it and get my money back

  • @Tom-ej8bb
    @Tom-ej8bb Před 2 lety +1

    Wondering how old is unit and the history of maintenance!!!
    Well done!!

    • @fourbyfourer
      @fourbyfourer Před 2 lety

      Ya I would also like to know the history and maintenance history of it.

  • @user-kq8xy8uq9e
    @user-kq8xy8uq9e Před rokem

    Возможно кто то сталкивался
    Honda TRX 400AT5 буксует после 30 мин катания
    Квадрик едет но не тянет в гору
    Что может быть? Это хондаматик вышел из строя
    Уже голову сломал
    Спасибо

  • @raymondfincher3583
    @raymondfincher3583 Před 2 lety

    When you're putting it back together the little actuator on the side with the gear does that have to be all the way forward or to the back of the 4 weather

  • @JackIrwin-sd7vd
    @JackIrwin-sd7vd Před rokem

    What is your source for CB750A Hondamatic transmissions and parts?