How to Convert 4-20mA Current to 0-10V DC Voltage Signal | Current to Voltage Conversion -
Vložit
- čas přidán 3. 04. 2021
- How to Convert 4-20 mA Current to 0-10V DC Voltage Signal | Current to Voltage Conversion -
Why we use 4-20mA Signal instead of 0-20mA or 1-5V DC in Industrial Instrumentation in Hindi
1. Why we using 4 to 20mA Signal Hindi Tutorial.
2. Why using 4 to 20mA Signal in industry.
3. The Fundamentals of 4-20 mA Current Loops in hindi.
In This Video We Covered:
1. 0 - 20 mA Current to 0 - 10V DC Conversion.
2. 0 - 20 mA Current to 0 - 5V DC Conversion.
For More Such Types Industrial Instrumentation automation system types Videos Please Subscribe our Ashok Etutor You Tube Channel Thank You.
Have A Nice Day !
You are the best sir!!!!
Good coaching
Sir pls configuration kise kare us pe Video banaye Aap k a video Bahut helpful hota hai
Thanks Sir...
I have one confusion..
Plz help me…..
Almost Transmitter or Instrument is power up 24 VDC through DCS/PLC.
When A/I signal 4-20 mA transmit from field to DCS. After that 4-20 mA signal convert to 0-5 VDC.
But here on same path existing voltage 24VDC available.so how to possible 2 different level of voltage (24 VDC & 0-5VDC) in same path.??
Superb sir....
Sir
Plc given 10v input AI &
Vfd need to 10v AO coming
Using resister ?
Thank for you explaining this. I am using 500 Ohm resistors on my Analog inputs that are 0-10VDC. Do I use the same 500 Ohm resistors on 0-10VDC analog outputs? I'm using an Allen-Bradley 1766-L32BXBA that has 4 Analog Inputs and 2 Analog Outputs(0-10VDC).
Thnx sir ji
Thanks 😊
Thanks 👍
Sir resistance perreral me nahi balke surise me lagana chaahiye please confirm
Yes i have tried this it is always use in series
Sir dc 5volt current 5miliampere ko dc 6volt 2amp kaise hoga ispar ek video bnaye
sir why your CZcams channel is dead
Ok Sir
Sir plz upload about foundation fildbus
Sir how to convert 0 to 5volts to 4to20milli ams
4 20 mA vfd को कैसे signal देता है! और pressure beed back कैसे लेकर motor ka speed increase करता है!
मान लिजीए की हमारा process pressure set value 30 kg/cm2 है तो feed back कैसा देगा विडियो में बताईये
Thanks
Plz share wiring diagram
Sir can we connect single 4-20 ma to 2 sources?(i mean from single 4-20ma can we run 2things?)
Yep, current is the same Anywhere in a series circuit. All devices in the loop will see the same current.
Sir,
I don’t understand the language but I’m assuming that you’re trying to explain how to convert 4-20 mA signal to 2-10 VDC signal. If that’s the case, then why the schematic is showing the resistor connected in parallel?
It has to be in series correct?
Am I missing something here? Please explain
The resisitor is not connected in parallel, it is in series itself. To show that we are measuring Vdc across the resistor he has stretched the arrow marks. Vdc is not a voltage source, its the symbol given to the voltage drop across the resistor.
today u are looking beautiful