[DIY] Arbitrarily switch (switch with motion sensor) installation work

In this video, we will replace the lighting switch in the garage workplace with a switch (switch with a motion sensor) instead of Panasonic.
Please note that a second-class electrician's diploma is required to replace this lighting switch.
If I go to the back room of the garage at night, turn on the lights in the workplace, proceed to the back room, turn on the lights in the back room, and then turn off the lights in the workshop. Then, the procedure is to return to the back room by relying on the light leaking from the back room.
This is very annoying, so I decided to replace it with a switch with a motion sensor that senses the movement of people and turns on the lights without permission.
This switch with a motion sensor is very expensive, and if you go to a home improvement store, it sells for around 6000 to 7000 yen.
Fortunately, unused items were listed cheaply at Mercari this time, so I bought it.
A normal switch plate can be equipped with three lighting switches, but a switch with a motion sensor takes up space for two single-sided switches.
Therefore, I thought about adding an outlet to the empty space, purchased an embedded outlet base separately, and thought about adding an outlet at the same time as replacing the switch, but the cover of the switch with a motion sensor interfered with the outlet cover. It didn't fit well.
Unfortunately, the switch with the motion sensor that was replaced was extremely easy to use and was worth the replacement.
This product is expensive, but I think it's worth the replacement, so I shared it in the video this time.
Please watch the video.
I saw the CZcams below and passed the exam for a second-class electrician.
――――――――――――――――――――――――――――――――――――――――
--- HOZAN Electrician test tiger
――――――――――――――――――――――――――――――――――――――――
/ hozantool
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
--- [DIY] Garage outlet expansion work (recommended by a second-class electrician)
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
• 【DIY】ガレージコンセント増設工事（第二種...
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
--- Panasonic once switch
－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－－
www2.panasonic...
#DIY
#GARAGE
#Type2electrician
#Switchwithmotionsensor

[@onigiriJRuchiBoost]

手動スイッチはいい
人感センサーあった

[@tytalkroom6854]

初めまして！
質問があるのですが、
照明がセンサーライトじゃない物でも
この、勝手にスイッチにするだけで、人に反応して、照明がつくんですか？
それと、センサーライトを辞めたくなったら
勝手にスイッチのツマミを切にしたら、普通のスイッチみたいになるんですか？

[@ZUBUGARAGE]

こんにちは、コメントありがとうございます。
はい、人や動くものに反応して照明が付きます。
また勝手にスイッチのツマミを切りにしたらスイッチOFFの状態なので照明は点きません。
普通のスイッチのように使うにはツマミを「切」にしたり「連続入」にする事で可能ですが、ツマミが小さいので少し扱いにくいかも、です。

[@tytalkroom6854]

@@ZUBUGARAGE
なるほどです‼️
めっちゃ便利そうなアイテムですね(*^^*)