You'll get better power and fuel efficiency if you put a 90 elbow between your carb and cone filter there. Yes, it will add a little restriction, but it adds turbulence which increases fuel atomization.
Awesome looking bike bro definitely looking into getting a 150cc and so far I’m liking this option also ur mic sounds great lol love how it picks up the bike skins and ur voice with out cracking thanks for this review
Go on offerup and buy a decent bike for 3 grand like a 600 not a 150 cc its a joke and it breaks easily and no mechanic will even tou h it olease do more research
@@Michaeljohndavx A Grom or anything like it isn’t about power. It’s about how fun they are. Once you go up to 250-300cc you are getting a full sized bike. That right there defeats the whole entire purpose.
@@EthanKendall37 i build these bikes from scratch brother the point is its a waste of money unless you are a experienced mechanic like a headache so use your head kiddo
I do door dash on my Grom Clone. Delivering to condos built like his is a pain in the butt. The numbers are always in no proper order. Hate gated condos community's that are built in 12 apt outcoves down windy roads. its fun on the way out, looking for one is cancer.
You should put Daytona enema 190cc on there. They're the best pit bike engine available 24 horsepower and comes with 5-speed transmission and oil cooler
Highway yes , freeway (interstate) no. Where ever the speed limit is 55 mph your good, 65 mph however is a no no. You wouldn't want to be flat out 100 percent throttle on the freeway struggling and maybe even not succeeding in maintaining the speed limit with cars blowing by etc.
Hi. I will answer them in the same order. It is roughly $1900 after shipping and taxes. If you are referring to the shipping speed I got mine in 4 days after being sent. Yes, in most states after 50cc’s you need a valid driver’s license with a motorcycle endorsement.
I'd never ride a cheap Chinese clone! Your brave and I ride daily but I'm not as brave as you. I'll stick to my Groms and Monkey even if they cost triple of what a carbureted clone does.
@@MJTechChannel I'm never going to buy a new motorcycle and have to go over every bolt and fastener before knowing it is not only solid but safe. TBH I only watched part of your video to just drive the point home to someone to not buy a clone because they would almost immediately have to spend time and money on the bike. Neither of which they have any to spare as she's been diagnosed with terminal cancer. I'm in all the clone FB groups and I'll stick to my (6) Groms and 2019 yellow Monkey. Take care and good luck out there.
@@603adventures9 no I’m not mad. I have (6) Groms and a 2019 Yellow Monkey. 😂🤣😂 I’ll be able to buy parts and upgrades in 25 years and your bike won’t even exist. Your money, your choice but your delusional if you think I’m upset with what complete stranger is buying with their money. Bet I won’t see you at any of the Small bore events around the country tho. You know with all the money you saved you shouldn’t have any excuse to not make the events tho. 😂🤣😂 ✌🏽
I was so close to getting lifan mini rs 150cc but China made is a no for me. I have a german and a china made electric bike, one is gold and the other is trash.
TX POWERSPORTS nickle and dime the crap out of you. With all the bogus charges and then shipping your looking at like 2k. So much for his only 1500$ he boast in thumbnail.
Honda pissed me off so bad my next bike is gonna be a clone.... Maybe this one. I will say Love my Navi! But the monkey( 5k) way to over priced for what it is. Jmho
These bikes are junk. Z125 or grom will run like a top in 30 years. Go save your 3k for a season of riding an unreliable china bike you’ll end up paying for another bike in a year
@@nestlesnipes8353 "The Sundiro Honda Motorcycle Co., Ltd. and Wuyang-Honda Motors Co., Ltd. are in charge of Super Cub Series production in China. This article examines some of the operations of the Sundiro Honda Motorcycle Company. Sundiro Honda Motorcycle Co. is a joint venture between Sundiro Investment Ltd, a private capital company in China, and Honda. It manufactures and sells Honda motorcycles. The company was started in the year 2001, and production of Super Cub series models began in 2002." right from global honda website . . . simple GOOGLE search . . . "Hondas are also made in the USA, CHINA, Pakistan, Brazil, Indonesia, India, Thailand, Turkey, Argentina, Taiwan, the Philippines and Mexico." Kawasaki, . . ."Some of the most notable production countries include the US, Japan, Philippines, CHINA, India, Bangladesh, and Thailand."
I don't know how I ended up here but your review was so good and thorough I couldn't stop watching. And I don't even want a motorcycle lol.
You got the mini bike bug
You'll get better power and fuel efficiency if you put a 90 elbow between your carb and cone filter there. Yes, it will add a little restriction, but it adds turbulence which increases fuel atomization.
Awesome looking bike bro definitely looking into getting a 150cc and so far I’m liking this option also ur mic sounds great lol love how it picks up the bike skins and ur voice with out cracking thanks for this review
Don’t do it
Go on offerup and buy a decent bike for 3 grand like a 600 not a 150 cc its a joke and it breaks easily and no mechanic will even tou h it olease do more research
@@Michaeljohndavx A Grom or anything like it isn’t about power. It’s about how fun they are. Once you go up to 250-300cc you are getting a full sized bike. That right there defeats the whole entire purpose.
@@EthanKendall37 i build these bikes from scratch brother the point is its a waste of money unless you are a experienced mechanic like a headache so use your head kiddo
im 55, i want to buy a bike like this..i also want to learn how to wheelie...LOL
I'm 51 and got mine a week ago.. it's a fun lil bike!!!
I do door dash on my Grom Clone. Delivering to condos built like his is a pain in the butt. The numbers are always in no proper order. Hate gated condos community's that are built in 12 apt outcoves down windy roads. its fun on the way out, looking for one is cancer.
Nice bike bro
You should put Daytona enema 190cc on there. They're the best pit bike engine available 24 horsepower and comes with 5-speed transmission and oil cooler
That’s a ZS190, Condor is a CG style ( not horizontal )
That looks super sick!
Chocolate milk oil? Looked like there was water mixed with the oil??
I would have gone with the Lifan KP mini 150. Lifan builds the motors for honda and it's a reputable company that does small-bore moto gp style racing
KP Mini is excellent
@@gmodesikeHard to adjust valves though.
@@jimstenlund6017 it's really not bud.
@@HazeyDayzz420 dropping the engine to adjust valves doesn’t qualify as ‘hard’?
2 stroke....
Lol it won't start unless you remove the plastic lol. Thanks for the video
i think he gets these for free...doesn't really "extensively review" them
Run in time is about 600 miles then drop the oil
You can upgrade to a CG250 engine with minimum problems even with mounts
Look up Janus Cycles, see what they do with CG250s
great video bro
so with this bike i can take it on the freeway/highway and not get pulled over? (I live in California BTW)
Highway yes , freeway (interstate) no. Where ever the speed limit is 55 mph your good, 65 mph however is a no no. You wouldn't want to be flat out 100 percent throttle on the freeway struggling and maybe even not succeeding in maintaining the speed limit with cars blowing by etc.
The headlights on these look like it's about to rob you at gun point
what are all the specific tools do you need before hand? is there a tool bag you recommend
go with the Lifan KP mini none can touch it best mini on the market right now
nice colt intake n a turbo would b cool
I'd cover it in red lock tight just to be sure.
No!
Three questions. How much does it cost? When can I get it? Do you need a license to drive/ride it?
Hi. I will answer them in the same order. It is roughly $1900 after shipping and taxes. If you are referring to the shipping speed I got mine in 4 days after being sent. Yes, in most states after 50cc’s you need a valid driver’s license with a motorcycle endorsement.
you mentioned you put s 42 slow jet where on earth can i find one there are no slow jets that look like the stock jet anywhere online please help
Is it there an option for this bike to install abs breaks? And did you receive a title or paperwork for the license plate?
Mini moto fun!
Carb link please.
You mentioned you lowered it? How did u do that? I can barely tippy toe mine and im 5’9 lol
Where are you, looks like south Florida?
Nice tires to
Seems like a good deal
I think so, it needs a little work but it’s the same with any other Chinese made motorcycle.
can you post a link to the carb you purchased?
I have condor150cc too in red an how can I change my air box can u put a video up for that
Link to Carb, please?
How long after bike delivery did the MCO arrive?
About a week later
intercoolers r alot like a fuel injection sytem
Where you bought bro? I want one that color
u know MotoCheez on CZcams
I do
he is my friend I'm always in his videos
@@Motorider2018 Nice! You guys are in Florida also right?
I don't live in Florida he's got a house down there and he got a house in ct that's where I live
you left from the forest in west palm beach lol
Did you get this bike for free? Top speed on the video was 58mph.
Yeah. Those things rip!! Not toys. Lol.
so is this litte bike really worth it i have an interest in it but not sure if i should pull the trigger
Oh no it’s worth it I love it man I’m 5,9 weighing in at 260 an it acts like u weigh nothing gets up to speed just fine
It's shipped with a faulty carb and no choke lever? Think I'd rather buy a used Grom and know everything's going to work
Yeah go ahead and pay 3k for a used one. 😂 These bikes are not for the average
Wow how much is this bike i want a mini bike
$1500
How do you shift ? Is it automatic ?
It’s manual and you shift like a regular bike 1 down and 4 up
You can literally run regular gas in the tank
are you Canadian?
why this one instead of the kp mini?
Style preference.
Ok mini better quality lifan makes good bikes
This is a OHV engine with kick start, KP mini is OHC and electric start only.
How tall is it???
Do you need a license for it ?
Yes you do
@@MJTechChannel awesome
I'd never ride a cheap Chinese clone! Your brave and I ride daily but I'm not as brave as you. I'll stick to my Groms and Monkey even if they cost triple of what a carbureted clone does.
It depends how well you prepare them/set them up!
@@MJTechChannel I'm never going to buy a new motorcycle and have to go over every bolt and fastener before knowing it is not only solid but safe. TBH I only watched part of your video to just drive the point home to someone to not buy a clone because they would almost immediately have to spend time and money on the bike. Neither of which they have any to spare as she's been diagnosed with terminal cancer. I'm in all the clone FB groups and I'll stick to my (6) Groms and 2019 yellow Monkey. Take care and good luck out there.
@@jal187 Totally get it. These are not for the “get on and ride” bikers. They have a special place. Take care and stay safe.
Lol you mad you paid double same bike these bikes are great have 20 k no issues change oil check bolts first get change plug last forever
@@603adventures9 no I’m not mad. I have (6) Groms and a 2019 Yellow Monkey. 😂🤣😂
I’ll be able to buy parts and upgrades in 25 years and your bike won’t even exist. Your money, your choice but your delusional if you think I’m upset with what complete stranger is buying with their money. Bet I won’t see you at any of the Small bore events around the country tho. You know with all the money you saved you shouldn’t have any excuse to not make the events tho. 😂🤣😂 ✌🏽
Is this the same bike as the vader 150cc
Yea
fast forward to 15:10 thank me later!
I was so close to getting lifan mini rs 150cc but China made is a no for me. I have a german and a china made electric bike, one is gold and the other is trash.
I would not ride that bike after he
Put it together
TX POWERSPORTS nickle and dime the crap out of you. With all the bogus charges and then shipping your looking at like 2k. So much for his only 1500$ he boast in thumbnail.
They have them on Amazon to
Honda pissed me off so bad my next bike is gonna be a clone....
Maybe this one.
I will say Love my Navi!
But the monkey( 5k) way to over priced for what it is.
Jmho
the 125 is a grom clone, this however is not.
yes it clearly is a clone looks like a 2025.
@@MrPlumloko looks yes, displacement, no. That was my point clearly in the first comment.
I hate you do a videos on flipflops and I don't care you are on on Florida or the Sahara....but after that is very good videos....
😂😂😂
These bikes are junk. Z125 or grom will run like a top in 30 years. Go save your 3k for a season of riding an unreliable china bike you’ll end up paying for another bike in a year
But Honda and Kawasaki get their bikes made in China . . . 🤦🏽♂(sigh)
@@jeffstewart7439 they most definitely don’t
@@jeffstewart7439 find me a Honda or Kawi made and assembled in china
@@nestlesnipes8353 "The Sundiro Honda Motorcycle Co., Ltd. and Wuyang-Honda Motors Co., Ltd. are in charge of Super Cub Series production in China. This article examines some of the operations of the Sundiro Honda Motorcycle Company.
Sundiro Honda Motorcycle Co. is a joint venture between Sundiro Investment Ltd, a private capital company in China, and Honda. It manufactures and sells Honda motorcycles. The company was started in the year 2001, and production of Super Cub series models began in 2002."
right from global honda website . . . simple GOOGLE search . . . "Hondas are also made in the USA, CHINA, Pakistan, Brazil, Indonesia, India, Thailand, Turkey, Argentina, Taiwan, the Philippines and Mexico."
Kawasaki, . . ."Some of the most notable production countries include the US, Japan, Philippines, CHINA, India, Bangladesh, and Thailand."
@@jeffstewart7439 Japan, USA, Brazil, Pakistan. China has its own market so no they are not made in china lmao