Rebuilding A Wrecked 2023 Corvette C8 Part 7!!!
Vložit
- čas přidán 3. 01. 2024
- We are making this thing come back to life! We finally got the frame rails on for good and also the motor back in. This thing is going to be the most insane c8 corvette ever once were done with it. Thanks For Watching!!!
- Jak na to + styl
![/ᐠ - ˕ -マ𝗳𝗮𝗿𝘁 𝘀𝗼𝘂𝗻𝗱🎀 [𝗽𝗮𝗿𝘁 𝟭𝟯]](http://i.ytimg.com/vi/5ks3wzJlylw/mqdefault.jpg)
I'm A GM master tech, you need to put back all the original modules for the blue car. The VIN is learned to all the modules and if you swap modules it can actually lock the modules. The reason the car starts and shuts off is because of the Passlock system is not enabling fuel. You can't even use the black cars keys because they are learned to the black cars VIN and are now locked. You need to order 2 new key fobs from the Chevrolet dealer and have them perform an IMMO learn. you will have to tow the car to a dealer or find a tech that will bring a laptop with Techline Connect and a MDI2 to perform the IMMO learn. If you can't salvage the original ECM they may be able to reprogram the black cars ECM to the blue cars VIN.
Or just call a locksmith
@@tacoma9851They likely don't have the software yet a lot of newer cars require specific programs only useable by certified people
Yeah you’re 100% correct & I also told them that caming that engine on an already hot engine from the factory was a waste of money and it’s just gonna cause problems later down the road. Why take a couple thousand mile corvette engine that’s not even broke in yet and slap only a bigger lope cam without upgrading the lifters and everything else in the engine to compensate for an oversized cam ? My opinion it’s silly and just wasting an engine that’s already capable of running 200 mph. If they wanted to build an engine they should be doing it to the other engine not this one good one with very low miles. But they’re young and don’t know much about engines and they’ll learn the hard way I guess.
I love the way the community helps these guys. You have to admire their Can Do attitude, but sometimes they need the help of folks with more experience and this is a perfect example.
@@CCRider5312 when people do cams they do upgraded lifters and such kinda have to remember it's an ls it'll last
Hey guys I do computer programming for gm , easiest thing to do would be put all the Original stuff back in **modules that you guys swapped** and have someone make you a key for the vehicle
Unfortunately most of those computers are vin locked, “meaning you can not reprogram a used one will need to be new. it’ll start but it cuts off due to the security being activated.
There’s your answer
What @mayito said. 👍
I have a fix,,Silverado does the same,,,leave the key on for 20 min till the light goes out,sometimes it takes 3 times,but there is a way to get the sec to relearn the new ecu, btw you new a charger on the battery. I had to go thru all this crap when I put a newer (tuned for more power) ecu in my truck
Even if you change computers and miles the car fax/title will says mileage error
Did GM unlock the transmission yet?
Shout out to Pops for being the Gopher of this crew. Wouldn't be the same without him.
We all know he runs the operations. Makes sure his kids have all they need to get the job done.
Congratulations on the new pups, I would love to have one. Please contact us.
Definitely the gopher 😂
Hi I need to ask is this pops the same pops from 23garage?
How much is a paper I would want it but I lever at South Africa
Congratulations to Max and Jules for the happy litter . Those pups will be beautiful.
hoping they keep them all and include them in the future videos ❤
Gm technician here, you cannot swap modules like that from car to to car especially when they are different trim levels. It sets environmental dtcs they are called when the vehicle recognizes modules have been swapped. All theft has to correspond bt all modules or it will cause a no start like y'all are having. Best recommendentation is to keep all modules in the car that came with the car or your never going to get the car right or all dtcs cleared
Thank You !
1000 times easier to leave all modules in the proper car and get a key programmed. They all have to be coded to each other. The two cars will have different options/features coded etc.
Keep up the good work !
Yep! It'll fire but die after a couple seconds because of mis-matched computers and modules. I learned about that stuff when I did a Gen III hemi swap back in 2008 before there was any information out there
Those puppies are soooo cute ❤😊!!! Great to see Pops in the video 😊❤🎉
always nice watching you guys work so well with each other
Awww I absolutely love the puppies!! I want one!!!❤❤❤
The line of 'i guarantee this is probably how they do it at the factory' made me laugh my nuts off 😂😂😂
😂😂😂
@goonzquad hey guys the Z51 package has different gears, and springs. May want to look into it.
@@wps620you are correct.
Simon always says some noteworthy stuff like that lol
@pmyhill, lmao, these guys wouldn't last one day on the assembly line at GM.
Great job so far on this! Genuinely impressed 👍
Looks like the puppies are doing well! I am looking forward to seeing you guys doing some ripping with the Corvette! Well done!
you guys blow me away some times, the confidence that you plow into a rebuild and bonding of major parts is insane. That is a major rebuild of that rear end in a short period of time.
I want one
They don't need confidence. They have money. If they screw up, they just buy another one.
We all know they'll never actually get the car 100% and it will just get parked on the stacker after the first test drive where they pretend it's way faster it's actually is then it'll never be actually used. So it doesn't matter if it breaks in half.
What blows me away is them always saying that is exactly how it's done in the factory. Like as if these guys have the faintest of ideas of how they build them in the factory.
@@1one3_Racingmostly their cars is finish but Camaro n Tesla
yeah and they glued a lot of that structure leaving bare metal exposed inside the joints so in 5 years that will be a rusty old mess
Love y’all keep it up
pops pouring that gas in like a mad scientist bringing his monster to life
I love how you guys adapt and overcome to doing things you haven't done before
Great job sofar looking forward to seeing it ripped 🙏 🎉
Love the red GMC in the background!
Always nice watching you guys work Nice Work.
Great job on that rear frame guys! outstanding!
Congratulations Max and Jewel! I would love to have one!❤
Me too! 😊
I work at the plant and I'm loving this build guys! Keep your eye open for a Z06 and grab one if you can. It's been fun watching you dig into this car.
Can't wait to see it running and driving
You are actually insane. Love the work. You came from 4 wheelers to this. Thank you.
good looking GMC in the background
Nice work boys 👍👍
Aww those pups are beautiful 🙏 I love your up beat positivity dudes people could learn a lot from trying to be positive instead of being so negative all the time 😇 cars looking cool really coming along I’m loving this build 👍
It looks really hot like that black and blue like it did in the start of the video, if u did something like that half and half black and blue to the paint it will look unique... also just like the interiors...
I’m a truck driver, I watch you guys all the time! Great job!!! 🎉 happy new year guys!! Let me have one of them pups 😉😬
Same 😊
Put em in random orders😂
Joking of course.😊
I’ll drive down and take a pup if it’s free! They prolly gonna put them up on the website for 100G each
Happy New Year Goonzquad! New puppies and another great build. Best wishes for your continued success.
Shop dog turns into Shop dog family! We have the same situation but with cats. A stray that because the shop cat has found a girlfriend...and now they have 6 kittens looking for a good home
its a blessing. Please keep all pups...
Blessing to you guys!
Go Goonzquad! Great looking puppies!
All the best from Portugal! :)
The GoonZquad Boys continue to impress me. Kudos to you all!
They did a great job with this one! Can't wait to see the finished project! Hope to get a car like this in our garage one day
I just respect your dedication!
Amazing you guys do excellent work
Can't wait for the trackhawk to be back too!
That sure was a nice red GMC y’all boys had parked outside there
Gotta have at least one nice truck in the fleet.😲
Was in the shorts video he made a few days back too
Absolutely beautiful pups, congrats!
Awesome work Guys!!!!!
Happy new year guys can’t wait to hear that engine run
This has been my husband's absolute favorite show since episode 1!!! From the drift car to this Vette he knows every episode by heart! Now I'm hooked too. OMG The Puppies!!! We had a Jack Rabbit Pitbull for 16 years, sadly she passed and it's not the same.... Keep it up guys, you're doing great!
You guys really make it look easy.
Bless you and your family Gambino
I sure hope everything is squared when the parts are glued. The factory have jigs to ensure squareness and all measurements. Eyeballing stuff will not be enough otherwise it will be a hit or miss! Just my thoughts. Hi from the Philippines.
you're absolutely right
It's straight it all went back together didn't it? It's not like they had to create the parts they just reassembled factory parts.
I agree with everyone else. You guys are amazing. There are professional body-men that wouldn’t have a clue how to do the computer work that you do. Half the time, they won’t touch glass replacement or do their own scans!! Love to Mom and Pops! And the puppies are adorable 🥰
Best video yet! Very nice GSD puppies! Sure miss mine, lost her just over a yr ago.
Excellent work love it..
I didn't think I'd hear mechanics say "so we got it all glued in"
Mechanic? Where?
Congratulations on the pups, you guys do good work👍🙏🏼
Awaysome guys.. Nice job..
🤜🤛
Wow - you guys are sooo talented! 🙏😊
I want a 03-04 terminator build ! That would be sick
Yes need that!
You guys did an awesome job in short order. I bet the car would start right up if you put all the original electronics back in and had a key made for that car.
Nope. Two different engine and suspension systems altogether.The electronics will Never meld and work right.
You guys are awesome!!
You are the best guys ❤🎉
Honestly, after seeing how you all have grown. I'm just waiting to see the initial Goonzquad mobile. You guys will soon have a factory. Nuff respect, Billy is not afraid to open anything and dig in. ❤
POMB = Piss Out My Bottom
Another great video. Can't wait to hear the C8 run.
I know! I just wanted to hear it fully run !
Thanks for the longer video!!!
Y’all are some bad ass boyz thanks for the awesome content
Your dogs should be kept warm during the winter months anyway. Maybe in the office kitchen area. Put a per door so they can get in and out at their discretion. The office is heated , right?
What about dogs born in the wild? Has that ever occurred before?
@@cowboyninja9811😂😂
There is always one isnt there.... 🙄
Their long haired dogs made for the cold weather...... that's like telling me my wolf need to be inside in the colder weather..... sounds like somone needs some education
Well, I'm a Cat person, These two clowns pissed me off a long time ago because i don't think they like cats. I wonder what ever happened to Thomas, he was a cool cat. I hope he's ok.
You guys are really good at this, I'd love if you did a break down at the end of how many hours you spent on this and also for future builds it would be cool if you did an overview of how much time was spent on each milestone within the build.
Good try dudes,happy on how it's turning out and hopefully it doesn't stress u guys up too much to get it running for good but i gatto say well done boys and peace 👏
You guys choice of instruments are 🔥🔥🔥🔥🔥🔥
올 한해 건강하고 행복하게 항상 응원합니다 😊😊😊😊😊😊😊😊😊😊😊
Love you guys but the Corvettes c8 if you get if you get the muffler right it sounds like a formula F1 car century doing the headers and the cam and it should sound great I know you guys are all over it cuz you guys are the muffler experts all your car sound loud great job Billy and Simon and what's up with the update on Thomas is he retired
Love watching
I love ur amazing content and u guys are professional.. I like how you showed every steps. God bless you king ❤❤..
Check the Flux Capacitor that regulates fuel flow to the Geopheries Tubes.The 2023 Corvette has 5 of them, unlike the 2022 where because of engine torque allows for only one. Savy..
Keep it two tone. Keep the hood, roof and tail blue and paint/keep the bumpers, skirts, doors and fenders black. Would look sick
Thank you to all the GM techs for posting useful info.
Yes! and I love that there are GM techs watching these vids. But thats super helpful they can offer their expert level info
Where's the Sunday video????
Immo is shutting it down and the abs module needs to see brake pressure , the abs module is also programmed to the ecu ,put it back to the stock modules and your autel can probably program a key it’s not hard c,mon guys
Just so impressive dealing with the computerised systems too.... Keep these coming guys!
Pop’s is awesome and you all have to be proud of your family. Keep on providing good family content.
I won the truck 🎊 🤗🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳🥳
Who cares?
@@jonsmith6496salty much?
🤣 Wait so did I !
Did you really
Y’all all full of crap lol
so entertaining on so many levels !!!
Love you guys show , energy, and everything you do. You can literally see the love. But on the topic. I would love one of the puppies dudes.
Kevin
Exellent pups and what a 2024 start!! You are thee best crew ever!!!! Al the way from south africa!!!!!
Good build GOONSQUAD good to see your dad involved aswel keep up the good work boyzzzzzzzz 😊
This is awesome
HI GOONZQUAD GREAT WORK ON PUTTING THE ENGINE IN AND OTHER PARTS ON THE C-8. GLAD THINGS ARE GOING WELL SO FAR. CUTE PUPPIES AND NICE TO SEE POPS HELPING OUT. Y'ALL TAKE CARE.. 😊
Those puppy’s look so cute, Guys . The build is great to see. Happy New-Year
Congrats on the puppies! Car is shaping up nice!
Merry Christmas and Happy New Year. God bless you.
That's a nice GMC back there 😃
U guys content is unreal I wanna be like u guys one day own my own stuff and never miss on a build
Happy late Christmas and a late new year so I’m looking forward for you guys to start the car up and driving it. Keep up the good hard work.👍🏼💯
Love the videos guys
Absolutely love GSDs ❤️
I love the blue and black look.
Much respect to ur pops
You guys are the best no doubt and POPS is a BEAST the drive force Respect to y’all
Dude, dude, dude, dude, sick dude!
The build is going well. Love the German shepherd pups, lost our ten year old gsd couple months ago
I love you guys. 😉 good work and happy New Year
Yes, Max is a stud. Keep all the baby studs. Max you rock.
You guys are awesome. Best youtube channel ever
definitely one of our favorites too. We hope to be like this channel one day! love their content
Pops face when it fired up is great 😂😂😂
this car is a broken puzzle....congrats on putting it back together!