VELOCITYONE FLIGHT AIRCRAFT CONFIGURATION | PART 2 for XBOX | Including Reverse Thrust | MSFS
Vložit
- čas přidán 24. 07. 2024
- A step by step easy to follow tutorial for Xbox users. Configure your VelocityOne Yoke and Throttle for use in MSFS with single and twin engine props as well as two and four engine Jets. Two options are provided for activating reverse thrust.
REFERENCED LINKS
Aircraft Configuration Guide Part 1: • CONFIGURING THE VELOCI...
VelocityOne Flight Yoke and Throttle, the full review: • VELOCITYONE FLIGHT | T...
PC users can find part 2 here: • VELOCITYONE FLIGHT AIR...
TIME STAMPS
00:00 Introduction
00:45 Addition to Yoke
01:54 Different Profiles
02:56 Single Engine Prop Basic & Quad Setup
08:59 Single Engine Prop Advanced
10:21 Single Engine TurboProp
14:00 Setting Up Reverse Thrust
19:30 TBM 930
20:43 Twin Prop
25:10 2 Engine Jet
29:19 4 Engine Jet
33:07 Points to Note
SIMHANGER CZcams Channel Link: / simhangerflightsimulation
Join Simhanger on Discord: YOUR DISCORD INVITE: / discord
For more details visit Simhanger Website: www.simhanger.com
Connect with me on Facebook, Instagram and Twitter: @Simhanger1
✈ Would you like to support the Simhanger Channel? Well you could buy me a coffee here :) www.buymeacoffee.com/SIMHANGER
Looking for help with MSFS, then check out my HOW TO GUIDES, link to playlist here: • MSFS HOW TO GUIDE
MSFS on Xbox playlist can be found here: • MSFS on XBOX
Thanks for watching - Hry
Following a firmware update see my new reverse thrust and prop feather config here czcams.com/video/n3aSfoWTqC4/video.html
It’s been almost 20 years since I have been hardcore into Flight Simulator. Thanks so much for your videos and hard work! It has really helped me get back into the groove!
Thanks Mark, superb tutorial as always. your a great help to the sim community, thank you for your commitment to helping others. Looking forward to your tutorial for the PC.
I am incredibly grateful for this guidance. I would never have managed this alone in a million years. I have faithfully followed the guidance and enjoyed a few tremendous flights. Thank you.
Just managed to input all your settings from both videos. Had to get through some bugs, but finally figured it all out. I recommend anyone who purchased the V1 to do the same. Even if you find it's not perfect for your taste, it makes you learn a ton along the way. Thanks SH!
Thanks Mark, must have spent over an hour trying to configure reverse prop for the TBM, nice solutions 👍. Cheers
Just used this after getting the yoke and it's a big help. Thank you for the time and effort.
Dude thank you so much, you helped me alot, I was struggling finding the right video because my controls got wiped for some unknown reason. Thank you so much, you earned a sub!
Great instructions and much needed! Thank You for taking the time to do this.
Really Appreciate every video you have done for Xbox. I left Windows Many Years ago and Missed MFS so much. When it became available on Xbox I jumped at it, with your Help and Instruction I am like a kid again, I Love it so please keep up the excellent work....
Thanks so much. Just watched and took copious notes from VF1 Config. part 2. About to set things up. Great tutoring!
Amazing video, expecting to have mine V1 arriving soon, perfect video to make the experience more enjoyable, Thanks so much for the video, that was a lot of work and time you put in to this video!!
Absolutely amazing. The only thing I added for spoilers was B9 for spoiler arming toggle. You're a legend Mark.
Thank you so much for both videos, I''ve just gone in and configured my yoke :)
Just ordered my Velocityone and will be setting it up as per your controls! nice videos!!
Aloha from Hawaii!! Today's date is Thursday December 22nd 2022 and tomorrow my velocity one should arrive from Amazon. Your video on part one and two on how to configure the velocity one is absolutely amazing I can't wait to put everything in effect. The video and narration is absolutely great!! Thank you for making this video and I look forward to watching many more that you have available, Merry Christmas from Hawaii!!
Thanks again for the tutorials, glad to see someone supporting Xbox users.
Thank you so much, sir! I really needed the help. Greatly appreciated.
Patiently waiting for delivery of my Velocity One today!! Thank you for this (and part 1), can’t wait to set it up and get my virtual butt in the air!
This is such a great video. Thank you for making it easy!. Cant wait to get the controller now. :)
Thank you very much for this Mark. This has been extremely useful in setting my V1 up.
Glad it was of some help 👍
You are a smart guy Mark! Thanks
Thanks man this would’ve taken me forever to figure out! Much appreciated!!
I am new to Xbox and MSFS and have found your two tutorials (Parts 1 & 2) to be so useful in configuring my recently received VelocityOne Flight Yoke and Throttle. I have finished both parts now and everything has worked perfectly. You have made the tutorials easy to follow for a beginner. I thought I had a problem with the flaps, as did Andrew Rhodes, but I think I solved the problem by turning off Assisted Takeoff - please refer to my reply to his post.
Thank you very much for your great work. I am a subscriber and look forward to all your flight simmer videos.
Thank you for your help and support 👍
Amazing job with these videos!!! Thank you so much
THIS ANSWERED MY QUESTION ABOUT THE KING AIR !!
GREAT VIDEO
Great explanation. Saved me a lot of stress. ❤
A tutorial to help you configure your Velocityone Flight controller for use with multiple different aircraft in MSFS. Hope it helps. Comment below if you have a better way of doing things for the benefit of the flightsim community. Thanks
It and you help me a lot with MSFS 2020. Your tutos are very well done and explained. Thank you and continue your tutos.
For reverse thrust I’m using toggle reverse thrust and mapping it to Joystick L-axis 8+ (pulling the black Venturi throttle stick towards you)
It didn’t work but my theory would be that that “button” would activate reverse thrust and then I could push it back in to deactivate and do the same with the prop feather.
Wonder why I can’t get that to work? Any idea why it won’t let that be a work around?
Can't thank you enough for this!!
Thank you very much. You are very clear
Your explanations are extra!
Good job
Been struggling for ages to map button thanks to your easy to follow videos all done thankyou !!!
You sir are amazing! Thank you for all your help!
hi MArc... first able i never comment on video or esle.. However for you i had too... i wanted to buy a yoke for my xbox as a mid beginner but passionate and your video first on yokes helped a lot. then what can i say i bought this morning the Velocity and i love it despite a tough start with the firmare update bug... i have to be honest without these settings videos i dont think i would have bought one, kinda comlicated to all set up... but i follow yours step by step and it came out just GREAT!!!! the job you did, the patience, the time you took to describe it all its AMAZING and i cnt thank you enough. My msfs20 experience will take a huge turn and its cause of you so THANK YOU
Glad I was able to help 😀
@@SimHangerFS well you did more than that.... so really Thank you!
Fantastic as usual. Thank you.
FANTASTIC PAIR OF VIDEOS
YOUR VIDEOS ARE AMAZING!!!
Hey Mark, as always very clear and precise directions on configuring the Velocity One. Thank you as you really do make things simple.
Finally you mentioned some information on configuring sensitivity settings. Is that in a separate video?
thank you so much, cant wait to get flying.
Mark, your tutorials are the best. And I watch all tutorials for this gear. What make yours so excellent is the way you approach your viewers. Just explain how to set a control once (or twice) and rely on the intelligence of the viewer to repeat that for their own assignment. And you concentrate on the things that really matter. In this case which control is best used for a given function on a type of aircraft.
One tip: on aircraft without prop control you might assign the vernier prop control to be used as parking brakes. On the aircraft shown the control is also a vernier like one.
Yes, brilliant idea for the parking brake! 👍
Smart, I’m going to do that.
Took a while to figure this one out: Joystick L-Axis 9 -, then on press.
@@sethkazzim731 There might be an even better way. Since today TB released new firmware, that makes it possible to map reverse thrust to the four top levers by way of using the full downward move of all those as a new button. If you don’t need all of those levers for engines and have set one up as gear up/down you could use the down move for parking brakes. That will not interfere with gear up/down as parking brakes only make sense with your landing gear being down.
@@caskraker True, I will do that for my TBM-930 profile, your suggestion works nicely with my Cessna 152 once I got it in sync.
Thx a lot for useful settings🎉the v1f now is much better to handle, modd & understand with most of its rich combinations...firstly turtle beach has to spend a big pay check outsourcing their job on you😉Cheers Mark🍻
thank you for your advice and your time
Your very welcome
I finally figured out how to use thrust reversers on the jumbo jets without hold or toggle. Just goto settings and change throttle 1 decrease thrust as lever 2 button beyond detent and same for throttle 2 for lever 3 on velocity levers. Once thrust is at 0 pulling lever 2 and 3 back now decreases throttle into the reverse position. Hope its easy to understand now i dont have to press anything else just pull thrust levers back now and it reverses. Took me ages to figure out 😁
These videos are fantastic thank you! Can you do a video on your profile for the Super Hornet?
Of course, as soon as I fiddled around with the reverse thrust question, Turtle Beach releases a firmware update (and accompanying instructions) that now make the detent/reverse thrust functionality work as it should have from day 1. Kudos to TB for solving that issue so quickly.
Literally just spent the day configuring mine and then reads this. D’oh! 😂. Great news though, thanks.
Except having just updated Firmware to 1.1.0, it doesn’t work. Firstly the detent action only seems to work ONCE when recording inputs in the control settings - once recorded for one of the inputs, they stop working. Secondly, the input recorded by the Xbox does not match what TB advise in the instructions. It is supposed to be Buttons 41-44 but I actually get Joystick L-Axis 2+ (or close variations). Have given up and reverted to the suggestions here.
@@PrinceBarin77 That's exactly what happened to me. In order to get buttons 41-44 to show up, I had to force-quit MSFS, remove the VF1 USB cable and then start MSFS from scratch. Then everything worked as expected. It's all just a tiny bit fiddly right now, but after a few fits and starts it seems stable now.
@@Rick-ik2dd Thank you!! I think the “quick resume” status of my game was the issue. As you suggested, force quit the game, restarted everything and voila! All sorted. Much appreciated 🍻
thanks for the vid it help
Thank you so much for these profiles! I got a new V1 today. I could not make the flap lever work, it kept “stuttering” in every plane neither going completely flaps down. I’m going to assign the flaps to two unused buttons but I’m not sure which one is best.
Okay I figured out I had some assists that were still on. Thanks for all your help.
After stucking firmware update error , I was frustrated. But thanks to your great video clip I got back on the track of enjoying flight sim..
TB really need to sort out their update process. 👍
Thank’s 👍
First and foremost, thanks for all three videos. The profiles you have created are a great start to get one in the air fast. The problem I am having is with the twin turboprop profile, propeller pitch isn't working properly. It does work properly in other profiles. The axis shows a full range of motion in the controller programmer but in the sim the controller is restricted to the lowest 25% of the range. I can move the pitch full range with the mouse but as soon as I touch the propeller control it jumps back down to the bottom of its range. Thoughts?
Thank you
Thank you Mark for your awesome tutorials! Any chance you could review and make a tutorial for the "Thrustmaster - TCA Yoke Pack Boeing"?
Hi, I would love to, but I dont have that product at the moment.
Thank you so much, it was a challenge for me since my game is in Spanish and not everything is in the same place, but it helped me a lot. My husband bought me the controller for my birthday and I haven’t been able to use it because of the configuration; now the issue is that in-game, it doesn’t detect the VF controller…
Update the firmware. Process shown in my review video.
Great video!! Both part 1 and 2 were a great help! What button do you use to toggle the engine on and off?
Did you end up figuring this out? Also looking for an awsner
Thanks Mark for your tutorial 1/2. Still have a problem whit my yoke wich is still very ... well, not smoth in up and down specially in taxi and take off. Is it possible put some vaseline or any kind of oil (wd 40 as ex.) ? Y have almost 100 hours .... Thanks a have a great and safe 2022. From Portugal (jose)
Thanks for the setup tutorial as it has really helped me get up and flying with the TBV1F! When trying to fly the TBM 930, I cannot get the throttle over to the “idle/feather” position using the propeller. I have my setup exactly as yours is set for Turbo Props, but no matter what I do, I can’t get the throttle back over, it simply moves downward on the left side. Any ideas??? Thanks!
I may have figured it out. Testing further tomorrow!
Hi Mark thanks for the clips really useful. I have a question as I am new to flight sim and gaming I note Turtle beach recommend to keep all configurations on default to complete some of the flight training. If I configure as your part one and 2 will I still be able to use the flight training menu thanks.
The training reads only the default bindings.
You are such a life saver! I'm very new to MSFS and VelocityOne and I was having extremely hard time trying to figure out all the controls and somehow found my way to your videos which is very helpful! Thank you so much for the detailed guide, I setup my controls exactly as you did! I have a rather silly question and I hope you don't mind me asking - What button or stick is assigned on VelocityOne to do the same function as "Right Stick" on Xbox controller? I'm unable to scroll down/left/right of the screen or even reduce the airspeed of a jet using the knob on the cockpit as it needs to be rotated. Idk if i'm doing it all wrong but it's been very confusing as a newbie.
I’m not sure if this is assigned, try the trim wheel?
Thanks Mark for another great tutorial. Did you say in part one there will be a PC version of this tutorial?, is that still happening?. Cheers.
Hi, yes there is one for the PC coming up next week. 👍
Thanks!
Mark, you are the ABSOLUTE BEST! You must have been a teacher in this or a past life...your instruction is concise, well-narrated and well-filmed, and I'm sure that I (as well as many, MANY others!) have greatly benefited from your experience. Glad you're here and dedicated to helping others...
Couple of questions for you:
1. I've copied profiles over as you showed in Parts 1 and 2 and have stopped (for the time being) after setting up V1F_single_TR. Will get to twins and jets a bit later. When it came to setting up the upper right stick on the throttle quadrant for flaps axis, it programmed OK but when I go for a test flight and watch the flaps lever on the console, it moves sort of "herky-jerky". I can hear the "noise" of the flaps moving up/down and see them moving if I go to external view. It just doesn't seem to work as smoothly as it did when you demo'd it in your test flight. QUESTION: Could having "all assists" on when doing those test flights be interfering with the settings, or do the assists work ONLY in training and not in free flight? If it's not the assists, I must have mis-entered something and will have to go back a profile or two.
2. At this point, I have some "unassigned" buttons, namely, HAT-1 up/down, and B9/B10 on the programmable buttons on the TQ above the vernier controls. Any suggestions for things to program those to? I also don't have anything assigned to POV-2/External...best just to program that to an external 360 freelook?
Finally, glad to see TB is on the ball and put out an update/instructions for the reverse thrust issue. (I liked how you had it set up on HAT-1 up/down but might as well do it TB's way as it seems a bit more...authentic). While I haven't gotten as far as twins and jets yet on the profiles, setting it up for one stick was pretty easy...pretty much the same thing for multi-engines?
Cheers, and keep up the GREAT work! 🙂
@@neilmackey9626 thanks Neil, glad you found it useful 😀and thank you for supporting the channel, much appreciated. Unassigned buttons could be assigned to autopilot functions. Pilot assist does interfere with these settings as your setting flaps up and your copilot might be trying to set flaps down for example. Turn off pilot assist when checking assignments. 👍
Hi, I wanted to ask one more question, velocity one came to me today, and I was setting the lights on the Kodiak 100, I noticed that I can't set the landing lights (on the Kodiak it's a three way switch, off, pulse, landing light). The toggle landing lights button is not working for this plane, do you know how to fix? I hope I explained myself well 😅
Brilliant tutorials, I’m a newbie and they have helped a lot.
Question: Will you need a Windows PC to do controller firmware updates, or can it be done via the XBOX? I’ve only seen peeps mention downloading the Turtle Beach control Center on Windows 10. ? As a Mac user only, I’m not sure if I’ll ever be able to update the controller and may need to return it whilst I can (Xmas present)😥
Firmware update via Xbox is available. No problem
You are a LIFESAVER! I was ready to throw this thing out a window setting things myself 🙃 Let's fly!!!
These tutorials were amazing, thank you. How do we get the green lights behind the yoke to work? They dont seem to flash or do anything when used with the xbox?
Not yet functioning with Xbox. Expect this to be enabled after the next sim update 👍
For the single prop advanced does anyone know why the propellers won’t spin? I configured everything like the video said for it. Plz help asap
im so stuck so on the instruction sheet it says you can use the v1 for cursor but you cant or at least i cant so for me all i can get as far as doing is looking around & then whatever it asks me to do next i cant do because all of the buttons is not doing anything of what its asking me to do...nothing at all so am i supposed to use the pad as well & thats a lot of swapping about & the opposite of immersion . i just dont get it why does it say that tthe v1 can be used as a cursor when it cant at all? what do i do? & also its set to default ...should i have it set to single engine? i tried to follow the first video but got stuck at the first bit when you moved the yoke back & then all the way forward & you got it saying axis 3 but mine said axis 2 when i did it? very very lost right now. do you have to map everything just to start , it kind of says that its got profiles ready to use but obviously it hasnt otherwise id be able to get past the very first basic tutorial & i cant do that
Hello and thanks so much for the detailed setup... Very helpful. I have one question/problem perhaps you've encountered. It seems no matter what throttle quadrant lever I assign ”flaps" to (using flap axis) the function is all over the place... Glitching out of you would. I thought it was a hardware defect on the velocity one however when I swapped with other items on the same level (say spoilers axis) the control was smooth and 1to1 matching in the sim... Very much unlike what the flaps were doing. Is there something I'm doing wrong or perhaps have conflicting settings? I watched part 1 & 2 if your videos very carefully b and think I did everything right??? Any suggestions would we very much appreciated. Thanks again for such great content.
Hi, in the assistance main menu, check you have pilot assist functions all switched to off.
Is this worth the price I have the hotas 1 but this looks so much better
I have an Xbox one, the controller worked out of the box in the main xbox menu etc. But not within msfs itself. I updated the firmware, restarted the Xbox, unplugged the controller etc. However, the control still doesn't work at in msfs, or show up as a controller option, any ideas?
Hi Mark thanks for part 1 and 2 I have spent a few hours on this now. When I create a new profile and configure the velocity 1 apply and saving after every configuration. The problem is it does not save the selections that I have made and does not even save the title of the profile. On my last attempt which is the 5th it seems to have saved the selected buttons under the default title and not the single engine basic which I named it. I worry about creating another profile and using the duplicate key and making the changes and re naming. I tried it last time and it did not duplicate from the basic settings what am I doing wrong I have followed your CZcams clips 100% sorry and thanks for the advice.
Sounds as if something is corrupted. Try restart console. Check for updates.
R prop, mix,& throttle levers programmable?
I have tried to configure A310 on my Velocity One but could not get Lights configured on same pattern as A320-Wonder if missing something
Having a difficult time trying to get flaps to work the way you’re showing. When using your set up if my flaps extend at all will be by 10%, when way hung flap lever it comes down then immediately back up (747 set up). Firmware 1.4.0 Xbox series x
Check your using the correct flap axis, there is more than one, also ensure pilot assist functions are all off.
How do you get the external view to zoom in and out with a percentage axis type control? Many thanks Mark 😊 🙏
Not sure I understand your query….there are zoom functions within the cockpit camera settings.
@@SimHangerFS
I'm trying to get the zoom to work on a plus and minus range with a button, ie the more you press and hold the further/closer the zoom goes.
Any advice on how to configure the altitude button for the A320? It seems to go to 99,000 feet and you cannot decrease it,Can anyone help?
Hi all, Im a green beginner, I know nothing about flying or Microsoft flight sim. I just purchased an XBox X and the Turtle Beach Velocity One. I don't know where to begin. Can someone please advise how to get the most out of the system? Thank you so much.
Setting Flaps as per your instructions, however when I go to test them the flaps are set at Flaps 1 and no matter which way I push or pull the Flaps Lever it goes back to Flaps 1, even when in flight I cannot retract the flaps, any suggestions as to what I am doing wrong please.
Hi Mark, check you have all pilot assist options turned off in the assistance options menu.
I dont know how to set flaps on axis 4 you dont let see it in this video pls help me
Hi Mark, this has been an amazing help - thank you! I seem to be having a problem with the flaps using the fourth quad arm. When I move it up and down, the flap lever in the cockpit is moving slightly but goes back to the original position. Did I do something obvious wrong?
Check calibration in windows if you can.
You might have had the same problem as me Andrew. I went through Mark's tutorial and the flaps didn't work on any of the aircraft. I thought that it might be due to an overarching setting in MSFS (as I am new to simming and had everything set to "EASY"), so I went into Assistance Options/Piloting and turned off Assisted Takeoff. Hey presto - the flaps then worked everywhere!
@@flybeeson7950 great solution….thank you
Switch to Joystick L-Axis 6 (or another number). Not 6- or 6+.
@@flybeeson7950 Hi Alan, I'm using FS2020 on XBox X series, and was having exactly the same problem as you and Andrew with the Flaps returning to the middle and not having full function, etc...... Thanks to your very helpful comment ref turning the assisted take -off to "Off" has worked perfectly, so a huge thanks to you mate !!. All the very best John Urwin.
DONT FORGET TO TURN OF ASSISTED TAKE OFF AND LANDING OR ELSE SOME FUNCTIONS AS FLAPS WONT MOVE AND RESET BACK TO 10 DEGREES
Thank you for the advice! This solved the issue with the flaps
I am brand new to this flight sim. I have the Xbox x can the turtle beach controller be set up to the Xbox with just the Xbox controller or do I need a keyboard ?
Up to you works with all three. Keyboard is recommended.
Mark - Thank you for your tutorials. I am a beginner and would have been completely lost without your lessons. I have a question and am hoping you or someone here can answer. I followed your part 1 and part 2 exactly. But when I set up my flaps axis using the right most level, it works fine in the control options. When I move the lever to the top the bar indicator moves to the right and if I leave the lever at the top, the bar indicator stays to the right. Same happens when I move the lever down. The problem is when I am back in the cockpit and I move the flaps lever, it kind of flickers but no matter where I leave the lever the indicator inside the cockpit snaps back to the center. In your video it nicely stays on the top. I have no idea what I am doing wrong. Many thanks again for your videos and Happy Holidays
Hi I’m using Joystick L-Axis 6, not 6- or 6+, reverse axis is ticked/on ☑️
Flap Axis, not the %
Thx Seth. This issue got fixed on its own. I deleted the profile and went through simhanger set up again.
Can velocity one controller be set up to Xbox x with the Xbox hand controller or do I need keyboard. Confused, can anyone help ?
Yes it can, but using a keyboard is. Much easier and quicker
To whoever this helps, for reverse thruster, they did make the detent a mapable button. But still, none of the hold/toggle reverse options actually put it in reverse. So I mapped that new button to "decrease throttle," and now when I'm at 0 throttle and lower it into the detent, it will go max reverse. So, there is no way to use the 0 to -15% throttle it goes from 0 to max -15% throttle.
I may have this wrong but I configured both the yoke profile and then one for the quadrant (using Xbox). I am trying to understand if there is a way to use both profiles at once. I selected yoke and it works as expected for yoke controls and the same with the quadrant. How can I get the yoke and quadrant profile to function together? Thanks.
You can't on Xbox. You need a simgle profile im afraid.
@SimHangerFS Ok. So I should rename the Yoke profile and add the basic quadrant functionality into one profile.
@@jmoestretti yes Sir, exactly that.
With the flap axis when u said if I move it up and down this will show on the screen, for me it just stays at the same position
It should move. Check externally if the flaps are moving. If not then the config is wrong (make sure all pilot assist features are off) or the aircraft you’ve loaded is not using the default config. Check with default aircraft.
Hey thanks so much for the fast response I just had to exit the menu then enter in again thanks so much I’m loving the controler
My throttles only start the power from the middle of the lever and up. How do you get power from the indent to the full throttle position like yours?
Check you are using the correct axis assignment…there are two, they act differently.
@@SimHangerFS May I ask what the right one is?
I have the same problem with engine 3 and 4. I have them both assigned to Joystick L-axis 6 but they act weird. No problem with engine 1 and 2 which are assigned to Joystick L-axis 5. All help is very much appreciated.
Hello.
I have followed the recipe for setting it up
Velocityone, and it seems fine, EXCEPT the elevator axis
It doesn't work properly at all
What can I do??? Karl.
Make sure all pilot assists are off in the assistance options.
Honeycomb yoke and throttle still not available for Xbox, would you recommend This TB accessories instead. Per honeycomb, they don’t have date yet for availability. Thanks
I have no date from Honeycomb also. TB is the next best thing.
thanks for your quick reply. im on xbox for a long time and just got series x lately, but would like to get on flight sim and get all the right accessories the first time to save money in the long run. i will be following your channel. thanks again
xbox has so many versions of the flight sim with the standard edition that comes free with game pass. Would you recommend the standard edition for newbies?
@@butch5187 yes, try that and see if it what you want…you can always upgrade to premium or deluxe later.
Mark, Excuse me again, I know I'm boring, but I need another help, when I use the autopilot but even if without this, the joke sometimes makes a quick movement always to the right, I think it's an input problem maybe something conflicts but I can't find the problem, has it happened to any of you? I would like to put a video to make it clearer but I am not authorized. I hope I made myself understood
Check under your assistance menu….sounds like you have pilot assist turned on. Turn it off
Wish it had cabin heat key bind
Flaps won’t work on my 747 even though I have the far right lever mapped to flap axis.
Works for me, check you have the correct flap axis mapped, there is more than one.
@@SimHangerFS I will do that as soon as I get home thanks for making such a great tutorial videos.
can someone that uses this in PC share the working mapping file... C:\Users\(name)\AppData.... inputprofile_(xxxx...numbers) is a xml file... thanks in advance
My throttle 0-100 is registering as the same as my aileron and my prop 0-100 registers the same as my elevator. 😔
Mark....there may be a different---better IMHO---way to achieve prop reverse with the VelocityOne. I've been experimenting with the "neutral" setting within the sensitivity settings, with credit to someone on one of the many forums for the idea. I've only done this, so far, on the Grand Caravan and TBM 930, but leaving the throttle binding just with the 0-100% setting (no other buttons/etc. for reverse), only, and setting the neutral sensitivity to around 90-95% makes the throttle go into beta/reverse about where you'd expect it to without having to press any buttons. It also gives you almost the full range of the throttle, whereas before it tended to go into beta/reverse at around 50% of its travel. It doesn't work quite as well with the TBM as the Cessna but, even so, it's more how you'd expect it to function (going into reverse just near and after the detent point). Please give it a go and let meknow what you think.
Hey Rick, sounds like a great solution. I’ll give it a go 👍
@@SimHangerFS After further experimentation, it looks like this is only an effective solution in the single engine turboprop configurations. The "hold reverse" button still seems to be the best way to get into reverse in the twin props and all the jet configs.
I already know that the Honeycomb Alpha will not fit on my small desk, but I can't find real dimmensions on this one.
L 483mm (19.01”) x W 496mm (19.5”) x H 183mm (7.2”)
@@SimHangerFS Thank you sir. Length is total depth from Yoke to the lower part (towards monitor) ?
@@psour33 uk.turtlebeach.com/products/velocity-one-flight
I want to delete all the velocityone flight controls and start new. I can’t seam to get the garbage can to come up so I can. HELP!,,,
Under preset manager you can delete all user profiles. The default profiles that come with the unit cannot be deleted.
MARK!!!!! I REALLY HOPE YOU ARE STILL READING COMMENTS AND SUCH AND RESPONDING BECAUSE I'VE GOT A REAL ONE HERE THAT NOBODY SEEMS TO BRING UP OR DISCUSS!!!
So on the actual yoke joystick scteen you have the ability to change colors and uodate firmware and put into training mode....but also theres that other section that has these 3 profiles (Default, Single prop, jet engine).....now unless i missed it from you, arent we supposed to change that profile setting on the yoke screen first, then once You load into MSFS and go to control options, youre also supposed to match which plane or engine type you chose? I thought i Heard someone say one time a while ago that they had to match in order for the buttons and levers to match n sync up perfectly.....then i thought well why is there even a DEFAULT profile to begin with if that's the case??? I really don't understand this part very well and has me somewhat confused as to what im supposed to do there. Do you know by chnace? And what about the training profile also?? How is that related? I can't be the only idiot out there with these questions hahahahaah. Any advice is much appreciated sir. Take care boss!!
Hi, the default profiles on the yoke are for ‘’training’’ purposes only. In other words so you can check the buttons/axis in something like windows calibration etc. They serve no useful purpose actually and the setting has no effect in the simulation. To all intents & purposes I ignore them. The peripheral has some default profiles built into MSFS.
@@SimHangerFSMr. Mark, thank you thank you thank you my good man, I cannot tell you how relieved I am to hear you say that because I truthfully had like no way of knowing either way if it was that important or not. Glad to know now though. I sincerely appreciate all you have done here to help newbies and amateurs like myself. Hopefully you dont mind it when people like myself ask you questions....cuz if i cant find an answer online, id much rather ask someone with knowledge and experience than believe everything I read on the net hahaha. take care sir. until next time!
joystick button 27 on throttle cut is not doing nothing. Nothing happen.
Great. After following the instructions carefully for over an hour, MSFS decides to glitch out and delete the entire settings
Ya and 2 is the only one who - you with your new o or