Hot Toys Tips and Tricks for Maintenance!
Vložit
- čas přidán 28. 03. 2021
- Here are the top TIPS and TRICKS for maintaining your Hot Toys and Sixth Scale figures!
If you haven't already, check me out with these these figures and more on my Toy Photography page! / keco.collects
And dont whatever you do feed them after midnight, lol. Sorry your comment about direct sunlight made me think of Gremlins. Gr8 tips.
This got a good chuckle out of me
Thank you for this! I'm new to collecting. I have three sixth scale figures and a couple kotobukiya 1/10 figures in my ikea display. Glad I watched this, now I know how to clean these things lol. Subscribing!
Thanks for watching and subscribing! New, fun stuff in the works
Thank you for sharing your tips and tricks! Much appreciated :)
Thanks for watching
Thanks for the pointers and tips!
Thanks for watching
Great Tips! Love to see the Merch!
Gotta represent!
EXCELLENT TIPS THAT I WAS NOT AWARE OF !!! ... JUST SUBSCRIBED ‼
Welcome aboard!
Nice tips! That weather stripping sounds like a good idea!
Yes! Must have
Some real good tips dude, I’ve been collecting about 3/4 months now and got around 7 figures and 3 on pre order was only planning on buying one or two hot toys but I guess that’s not happening no more😅. Was really putting off buying a display case but after watching this video I think it’ll b my next purchase. Thanks and keep up the good work, love your vids
Love to hear that! Thanks for checking it out
Your videos is always informative thank you!!!!!
Glad to help!
Another banger my dude. I like your different videos these are great!!!
More to come!
Thank you great tips for someone starting like me. Much Appreciated.
🙏🏻🙏🏻🙏🏻
Nice job man. I really dig your stuff.
Thanks for watching! More good stuff coming
Great tips!! Thank you sir!
Thanks for checking it out!
awesome stuff!
Thanks!
Sir you just gained a subscriber today. Excellent video. Thanks
Love to hear it! Thanks
as a new collector to Hot Toys, these tips was wonderful. i feel less worried about classic suit Spidey on a pose knowing the suit will go back to normal in a museum pose!
You should be good to go!
@@KeCoCollects can the same be said for Venom?
@@Volrath2242 I would think so.. he's just rubber ... thick rubber at that - so it may not be THAT poseable. Some people have talked about peeling , but I haven't had any
im gonna buy my first hot toys figure and this will help a lot, thanks!
Awesome! Let me know what you get 👍🏻
Great tips
Glad to help!
Another trick is to use your finger as a make shift lint brush on cloth - wrap it in double-sided scotch tape (the double sided is easier to wrap around your finger than regular scotch tape) and pat the figure 'til all the lint is removed. This is really useful on figures with dark clothes (like ROTJ Luke Skywalker) where the lint and dust really show up.
Great tip
Love Replay Toys! I have about 4 of them to choose from.
Love having that many options!
Great video brother, so many good and useful tips!! Also glad to see the channel growing. Keep rocking @strengththroughloyalty
Thanks friend! Good seeing you on this platform too!
Very informative video! Thank you so much! I just have one question though, if i keep my figure in a box for a very long time will it ruin it? I just bought my first ever figure but I just realized that I have nowhere to actually display it :(
It SHOULD be fine -- just make sure it's not in a damp or humid place in the meantime
Old video but some great tips! I just started collected Hot Toys 1/6 Scale Figures. Sadly I don’t currently have a display case and am thinking of getting one because i do smoke let alone have dogs so yeah, lot of dust and nastiness going around the house. I was more or less wondering what spray and rags are best to use when wiping down the body parts, armor, etc let alone the best way to clean the fabric. I accidentally dropped my Luke Skywalker behind a shelf and notice with a uv light it did get quite dirty. I just don’t wanna ruin anything.
303 protectant for the pleather/rubber/leather and canned air to blow off dust. Getting a proper display case would go a long way in helping. Good luck!
Hey man, I love your informative videos, they really help!
Had a question tough. Do you know a way to fix stretched out sleeves? When changing the arm on my ROTJ Luke I accidentially stretched the fabric from the sleeve and now it kinda looks weirdly warped...
I know what ya mean on those arms ... fabric is tough unfortunately. I don't suggest trying to "shrink it". If it's real bad, maybe look for a replacement outfit on eBay? Good luck.
Great video! What are those shelves you use to raise the Detolfs up called I’ve been looking to get some for when I set up my Detolfs?
KALAX from IKEA!
Thank you for the tips, this is very helpful and all I needed to hear, glad I found your video. Just started to collect and the figures will keep rolling starting next year. Now, I do not like the glass displays, or glass for the matter since it is very "cold" for me so I have an Ikea bookcase to display, AC/ Heat for Winter summer ~ temp at 24-25 Celsius throughout the year, no sunlight and humidity at ~40 - 50% since I am in Europe continental, are this conditions proper? If not I can adjust. The biggest issue is then the dust, and I am terrified of cleaning it regularly since it takes so much time to do it properly, so my question is, how often should I do this, considering that I dread doing it in general. Thank you for the tips, keep it up and love your collection.
If you have some canned air, using that a couple times a month should do the trick!
@@KeCoCollects thank you for the reply, will do that and see how it goes. Keep it up and wish you a great 2022 full of everything you want!
Thanks for helping me out :) just got the spider man far from home figure. Was wondering the suit that he has do I just use the wipes and wipe it gently on the suit?
That should work. Don't leave it damp -- and just "coat it" .. should be fine!
I highly recommend weatherstripping, but not the aerosol dust-off. I hit my SSC IG-88 with some; a piece blew off and out went into my carpet...I never saw it again.
Yes, spray at your own risk!
If your display room has windows, does adding curtains to block out the sunlight help stop the figures from being damaged by the sunlight?
Yes. Eliminate UV light if you can. I've installed blackout curtains to my room now
What do you think of putting silica bags in the detolfs to prevent moisture?
I wouldn't honestly.
9:24 Nice reference 😂 Hey and what about keeping your figure in the box and take her out a few days? I do that because I stilk don't have a safe place to display her 😢
Ha! Didn't even realize I've said that. But, yeah... getting them from time to time is a GOOD thing. Keeping them locked in a box with the chemicals have been known to yield issues too
@@KeCoCollects haha yeah was a Justin Collection thing xD Thank you so much! like, how long I can keep my figure in the box?
Thanks! I did not know about the battery thing. Better take those out and get some new ones
Yes! Thank me later haha
battery corrosion doesn't happen as often thought. But yeah, don't use the HT ones. You can leave batteries in (the ones not from HT).
In most cases, getting to the batteries and the on/off switch on Hot Toys figures is such a pain in the ___, its hardly worth it. That is the one area Sideshow seems to excel over Hot Toys.
Hey, got a question about the light. How safe is it to store in a well-light room, where the sun is above the windows and doesn't directly shine on toys? Did you try to use some reflective anti UV window shields? Will it work? I have way too dark in my room during the day, because I'm closing the curtains all the time, and I'm looking for some solution. Thanks for the tips!
I have "blinds" in my room that does a pretty good job, but I've since put curtains behind my detolfs in my new layout. I explain it in my NEXT video about the collection tour -- stay tuned!
@@KeCoCollects Thanks!
I've been collecting for a while now but finally got my first detolf cabinet today. Need to get some weather strip but otherwise I'm excited to display them in a glass case. Probably get another one in a couple weeks. Trying to just focus on my star wars collection.
Sounds great! Weather stripping helped me out recently!
@@KeCoCollects question but what size of weather strip did you use?
@@wesleywhite4782 3/8 wide and 5/16 thick :)
How do you fix the issues with robes and capes as shown on 7:05-7:15. Over time they start to look rough and fuzzy rather than smooth like when you first open the figure.
Though I don't know for sure, I would think the oils from our hands would be the cause for the robes to become like that. Just handle with care and make sure your hands are clean when reposing or taking them out.
Glad I watched this. I only have one hot toy, which is the punisher war machine. I've had it since release and left the batteries in there. After watching i looked at them and sure enough I can start seeing green on them. They still work but I got them out just as the Corrosion started.
Yes! Glad you caught them in time
Dang it, I’m going to have to remove the robe from my anakin and remove all the batteries from my figures lol thanks.
The batteries are annoying for sure :(
Hi very nice video sir! Can i ask if it is okay to put silica gel or dehumidefier inside the closet with the toys? I live in a hot country 30 deg celcius most of the time
Dehumidifier is fine -- actually encouraged if you have a humid country. Toss the silica packets away though -- those won't do anything. The figures need to breathe
@@KeCoCollects Are you saying that placing silica gels with my transformers would cause damage to them? Instead of helping reduce the heat and humidity?
Question. I have the dx Mando and it has the dynamic stick with the clamp. I feel it grips really hard. Will have damage the figure over time? I thought of trying to find a universal u hook stick to replace it. I don't plan of putting him in flight pose so the clamp seems overkill
There is not much you could damage on that figure since it has a body suit underneath. I agree that the hook or something similar would be a better option.
@@KeCoCollects ok. I was just concerned about it squeezing and leaving a permanent imprint. I might try and order a generic U hook to swap the sticks. Guess I'm just paranoid. It's my first figure and they're not cheap as you know lol. Love the channel. Keep it up.
Is an air conditioner for humidity control enough or does one have to get a dehumidifier?
Depending on the climates, I think an air conditioner is just fine!
Hi, Brother. Recently purchased Roadworn Thor Hot Toys. Even though I keep the figure in the box, do I still need to use 303 Protectant on it (like you advised on the rubber skin and pleather suit)? Additionally, since Malaysia only has two climates, I constantly run my air conditioning. Do I also need to apply?
No hurt in doing it! It will only help. I've been applying it on mine recently as well just for extra protection - I will say, be careful leaving it in the box, sometimes that does more harm than good sense all the chemicals from the paint, rubber, etc are stuck in there
@@KeCoCollects Noted. Thanks, Brother! I’ll keep that in mind
How do i safely unpeg and put new hands on the figures? Im worried if i put too much pressure on it might break
Great question! I actually did a video on this called "How to fix broken figures". Simply, the easiest way is heating it up with a hair dryer if you are nervous to make the rubber softer. Hope that helps!
When your the 900th subscriber
Congrats! You win a shout out in the next video!
Yo bro! I'm thinking about getting a captain rex figure, is there any pleather, leather or fabric or rubber in the figure?
Please answer!
Pleather on ammo attachment. Fabric undersuit
@@KeCoCollects Undersuit like under the armor?
I don’t have any room in my house where I don’t have a window. I’m going to put my detolfs in a room with a big window, but the light will not hit them directly. Still’ I’m thinking about putting black curtains on the window and also putting a “sliding curtain” in front of my detolfs to prevent light hitting them when the sun shines a lot. What do you guys think ? Could this work and keep the figures safe ?
I actually have blackout curtains behind some detolfs I have in front of windows. Works great!
How would I go about maintaining the clone wars Ahsoka Tano? I was thinking of getting it but not sure about the material that's on her oufit.
Material of the clothes isn't an issue, but rather her rubber arms. If posed too dramatically, they could crack.
@@KeCoCollects thanks so much! So I would just have to keep an eye put for her arms cause of the rubber. Cool cause I can finally own a hot toys for once!
Thinking about finally preordering my first hot toy and it happens to scarlet witch from wandavision with lots of pleather looking pieces. 😩 I’m moving to england so i don’t think UV rays will be a major concern but what are your main tips to start out and maintain a figure like that?
The pleather of today, is far different from the pleather of even a few years ago. Now there is more "rubber" in it. With care, there is no real reason to stress and not enjoy these figures. For peace of mind, there are "303 protectant wipes" that I know people use, but I do not use them personally
@@KeCoCollects Great thank you for the quick response, i’ll be ordering it today :)
@@KeCoCollects how about rubber material like the gold armor of aquaman？what should we use to preserve it?
@@user-vc5ks8tv5t keeping it free from dust and sunlight is probably all you really need for that. It's solid
My first hot toys was also scarlet witch!!!
Any recommendations on cleaning or preventing bvs Batman to flake ?
Try to keep it out of direct light and use a makeup brush to dust off!
Was wondering I bought myself some figures like endgame Thor and Far from home spider man. The Thor has pleather pants and the Spider-Man’s suit has a rubber material. Would I be able to 303 wipes for both pleather materials and rubber materials?
Should work well on everything except cloth!
@@KeCoCollects have you used them personally on both?
@@KeCoCollects do I need to use these wipes if the figure isn’t in uv light? What exactly are the wipes for?
@@Dholt29 I never have. Its for keeping leather/pleather from drying out. If you have AC or live in a climate that isnt very humid, you dont have much to worry about.
What if you have a detolf case next to a window . That window has blinds on it . Should I worry ? It's not direct but some some sunlight seeps through
One of mine is next to a window with shades. As long as it doesn't get too hot in the room you should be fine. Maybe check from time to time and see where the sun leaks and move the figures around a hair. Good luck!
Yeah it doesn't get hit my house is at 69 degrees. And it's not the entire figure . Think my 89 joker right arm and vader's right arm and back of of his cape get the filtered uv
Split your vids into specific collection spotlights such as DC or Marvel or Star Wars to detail past figs, current figs, and potential future figs in collection subset
now THIS is the type of feedback I'm looking for!
What is your opinion on soap boxes? Does it hurt the figure to leave the lights on 24-7 with continuous power?
I don't own one, so I can't speak specifically to it, but it wouldn't hurt the figure, but the lights would give out eventually -- but they are LEDs, so we are talking years I'd think
@@KeCoCollects That’s what I thought but wasn’t sure. I’d like to display some of my figures with lights permanently if I can. Like iron man and even the Jedi characters
Replay Toys baby!
👀👀👀
@@KeCoCollects I manage one of the locations 😆
I finally got my first hot toy and every IKEA near me has no detolfs 😫😫💀
Hang tight! They restock. Good luck!
Quality
Why, thank you!
I really wouldn't recommend a fully enclosed display case unless you're ready to leave them open for at least an hour each month. Display cases act like greenhouses and will trap heat and humidity in them and that might damage your figures
Good thoughts!
Glass is terrible at holding heat. Greenhouses aren't made of glass to draw heat, they are made of glass so the plants inside can get sunlight. That's why reptile enclosures are now being made mostly out of wood as wood holds heat better.
High end figures should be using leather not pleather. Leather is not that expensive. They would get more than their money's worth from a full hide. Leather comes in all thicknesses, (think about a leather wallet) It's perfect for figures clothing and lasts much much longer than fake leather. plus it wears beautifully if you handle figures a lot, depending on the leather and the look you want. Pleather flakes and looks hideous. For what you pay for these figures leather is a no brainer. We should expect the best form these companies.
Great point! Wallets are mass produced as well - seems like an easy upgrade for them
Hey man! Just left a comment on another vid of yours about the camera angle looking straight up your nose… this vid is a little better… I ended up subscribing you to your channel because you seem like a chill dude. However- another piece of constructive critique- if you’re going to take the time to edit your videos, then you can go ahead and do a re-take whenever you have a truck driving through your neighborhood. Don’t call attention to it. Some people argue it makes you look more “human” when you acknowledge mistakes/bloopers/unexpected sounds, but the reality is it presents an unprepared video. Sure, you didn’t expect the truck barreling through your neighborhood, but instead of pausing and saying “oh. Don’t pay attention to that” just re-record and edit. Not trying to be an ass, I promise. Just ask yourself if you make these videos for fun or if you hope to build your base and monetize your videos? Not saying I can do better- just saying if I were to try, these are the things I would look out for before I post.
Appreciate the feedback! I've made some changes since.
I certainly 4:24 'd this vid!
LOL. Had to scroll to see what it was 👍🏻
A real hair, unused makeup brush. Not the synthetic .
Good call out
Mayb shoot more on figure and less on yourself while you speak, i find abit bland looking at you talking without demostration
Fair point! Always learning here!